From: "Michał Kępień" <kernel@kempniu.pl>
To: Jonathan Woithe <jwoithe@just42.net>,
Darren Hart <dvhart@infradead.org>,
Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 6/8] platform/x86: fujitsu-laptop: use a sparse keymap for hotkey event generation
Date: Mon, 20 Mar 2017 10:32:22 +0100 [thread overview]
Message-ID: <20170320093224.18541-7-kernel@kempniu.pl> (raw)
In-Reply-To: <20170320093224.18541-1-kernel@kempniu.pl>
Simplify hotkey event generation by using a sparse keymap. As sparse
keymap operates on scancodes instead of keycodes, adjust variable names
and debug messages accordingly.
This patch only handles the default keymap for clarity.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
---
drivers/platform/x86/fujitsu-laptop.c | 111 +++++++++++++---------------------
1 file changed, 41 insertions(+), 70 deletions(-)
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index 74da588ed871..8f1c9c204110 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -756,9 +756,22 @@ static void acpi_fujitsu_bl_notify(struct acpi_device *device, u32 event)
/* ACPI device for hotkey handling */
+static const struct key_entry keymap_default[] = {
+ { KE_KEY, KEY1_CODE, { KEY_PROG1 } },
+ { KE_KEY, KEY2_CODE, { KEY_PROG2 } },
+ { KE_KEY, KEY3_CODE, { KEY_PROG3 } },
+ { KE_KEY, KEY4_CODE, { KEY_PROG4 } },
+ { KE_KEY, KEY5_CODE, { KEY_RFKILL } },
+ { KE_KEY, BIT(26), { KEY_TOUCHPAD_TOGGLE } },
+ { KE_END, 0 }
+};
+
+static const struct key_entry *keymap = keymap_default;
+
static int acpi_fujitsu_laptop_input_setup(struct acpi_device *device)
{
struct fujitsu_laptop *fujitsu_laptop = acpi_driver_data(device);
+ int ret;
fujitsu_laptop->input = devm_input_allocate_device(&device->dev);
if (!fujitsu_laptop->input)
@@ -772,14 +785,9 @@ static int acpi_fujitsu_laptop_input_setup(struct acpi_device *device)
fujitsu_laptop->input->id.bustype = BUS_HOST;
fujitsu_laptop->input->id.product = 0x06;
- set_bit(EV_KEY, fujitsu_laptop->input->evbit);
- set_bit(fujitsu_bl->keycode1, fujitsu_laptop->input->keybit);
- set_bit(fujitsu_bl->keycode2, fujitsu_laptop->input->keybit);
- set_bit(fujitsu_bl->keycode3, fujitsu_laptop->input->keybit);
- set_bit(fujitsu_bl->keycode4, fujitsu_laptop->input->keybit);
- set_bit(fujitsu_bl->keycode5, fujitsu_laptop->input->keybit);
- set_bit(KEY_TOUCHPAD_TOGGLE, fujitsu_laptop->input->keybit);
- set_bit(KEY_UNKNOWN, fujitsu_laptop->input->keybit);
+ ret = sparse_keymap_setup(fujitsu_laptop->input, keymap, NULL);
+ if (ret)
+ return ret;
return input_register_device(fujitsu_laptop->input);
}
@@ -995,61 +1003,54 @@ static int acpi_fujitsu_laptop_remove(struct acpi_device *device)
return 0;
}
-static void acpi_fujitsu_laptop_press(int keycode)
+static void acpi_fujitsu_laptop_press(int scancode)
{
struct input_dev *input = fujitsu_laptop->input;
int status;
status = kfifo_in_locked(&fujitsu_laptop->fifo,
- (unsigned char *)&keycode, sizeof(keycode),
+ (unsigned char *)&scancode, sizeof(scancode),
&fujitsu_laptop->fifo_lock);
- if (status != sizeof(keycode)) {
+ if (status != sizeof(scancode)) {
vdbg_printk(FUJLAPTOP_DBG_WARN,
- "Could not push keycode [0x%x]\n", keycode);
+ "Could not push scancode [0x%x]\n", scancode);
return;
}
- input_report_key(input, keycode, 1);
- input_sync(input);
+ sparse_keymap_report_event(input, scancode, 1, false);
vdbg_printk(FUJLAPTOP_DBG_TRACE,
- "Push keycode into ringbuffer [%d]\n", keycode);
+ "Push scancode into ringbuffer [0x%x]\n", scancode);
}
static void acpi_fujitsu_laptop_release(void)
{
struct input_dev *input = fujitsu_laptop->input;
- int keycode, status;
+ int scancode, status;
while (true) {
status = kfifo_out_locked(&fujitsu_laptop->fifo,
- (unsigned char *)&keycode,
- sizeof(keycode),
+ (unsigned char *)&scancode,
+ sizeof(scancode),
&fujitsu_laptop->fifo_lock);
- if (status != sizeof(keycode))
+ if (status != sizeof(scancode))
return;
- input_report_key(input, keycode, 0);
- input_sync(input);
+ sparse_keymap_report_event(input, scancode, 0, false);
vdbg_printk(FUJLAPTOP_DBG_TRACE,
- "Pop keycode from ringbuffer [%d]\n", keycode);
+ "Pop scancode from ringbuffer [0x%x]\n", scancode);
}
}
static void acpi_fujitsu_laptop_notify(struct acpi_device *device, u32 event)
{
struct input_dev *input;
- int keycode;
- unsigned int irb = 1;
- int i;
+ int scancode, i = 0;
+ unsigned int irb;
input = fujitsu_laptop->input;
if (event != ACPI_FUJITSU_NOTIFY_CODE1) {
- keycode = KEY_UNKNOWN;
vdbg_printk(FUJLAPTOP_DBG_WARN,
"Unsupported event [0x%x]\n", event);
- input_report_key(input, keycode, 1);
- input_sync(input);
- input_report_key(input, keycode, 0);
- input_sync(input);
+ sparse_keymap_report_event(input, -1, 1, true);
return;
}
@@ -1057,40 +1058,16 @@ static void acpi_fujitsu_laptop_notify(struct acpi_device *device, u32 event)
fujitsu_laptop->flags_state =
call_fext_func(FUNC_FLAGS, 0x4, 0x0, 0x0);
- i = 0;
- while ((irb =
- call_fext_func(FUNC_BUTTONS, 0x1, 0x0, 0x0)) != 0
- && (i++) < MAX_HOTKEY_RINGBUFFER_SIZE) {
- switch (irb & 0x4ff) {
- case KEY1_CODE:
- keycode = fujitsu_bl->keycode1;
- break;
- case KEY2_CODE:
- keycode = fujitsu_bl->keycode2;
- break;
- case KEY3_CODE:
- keycode = fujitsu_bl->keycode3;
- break;
- case KEY4_CODE:
- keycode = fujitsu_bl->keycode4;
- break;
- case KEY5_CODE:
- keycode = fujitsu_bl->keycode5;
- break;
- case 0:
- keycode = 0;
- break;
- default:
+ while ((irb = call_fext_func(FUNC_BUTTONS, 0x1, 0x0, 0x0)) != 0 &&
+ i++ < MAX_HOTKEY_RINGBUFFER_SIZE) {
+ scancode = irb & 0x4ff;
+ if (sparse_keymap_entry_from_scancode(input, scancode))
+ acpi_fujitsu_laptop_press(scancode);
+ else if (scancode == 0)
+ acpi_fujitsu_laptop_release();
+ else
vdbg_printk(FUJLAPTOP_DBG_WARN,
"Unknown GIRB result [%x]\n", irb);
- keycode = -1;
- break;
- }
-
- if (keycode > 0)
- acpi_fujitsu_laptop_press(keycode);
- else if (keycode == 0)
- acpi_fujitsu_laptop_release();
}
/* On some models (first seen on the Skylake-based Lifebook
@@ -1098,14 +1075,8 @@ static void acpi_fujitsu_laptop_notify(struct acpi_device *device, u32 event)
* handled in software; its state is queried using FUNC_FLAGS
*/
if ((fujitsu_laptop->flags_supported & BIT(26)) &&
- (call_fext_func(FUNC_FLAGS, 0x1, 0x0, 0x0) & BIT(26))) {
- keycode = KEY_TOUCHPAD_TOGGLE;
- input_report_key(input, keycode, 1);
- input_sync(input);
- input_report_key(input, keycode, 0);
- input_sync(input);
- }
-
+ (call_fext_func(FLAG_RFKILL, 0x1, 0x0, 0x0) & BIT(26)))
+ sparse_keymap_report_event(input, BIT(26), 1, true);
}
/* Initialization */
--
2.12.0
next prev parent reply other threads:[~2017-03-20 9:32 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-20 9:32 [PATCH 0/8] fujitsu-laptop: use sparse keymaps for input event handling Michał Kępień
2017-03-20 9:32 ` [PATCH 1/8] platform/x86: fujitsu-laptop: move backlight input device setup to a separate function Michał Kępień
2017-03-29 19:54 ` Darren Hart
2017-03-30 4:04 ` Jonathan Woithe
2017-03-20 9:32 ` [PATCH 2/8] platform/x86: fujitsu-laptop: switch to a managed backlight input device Michał Kępień
2017-03-29 19:58 ` Darren Hart
2017-03-20 9:32 ` [PATCH 3/8] platform/x86: fujitsu-laptop: use a sparse keymap for brightness key event generation Michał Kępień
2017-03-20 9:32 ` [PATCH 4/8] platform/x86: fujitsu-laptop: move hotkey input device setup to a separate function Michał Kępień
2017-03-29 20:12 ` Darren Hart
2017-03-20 9:32 ` [PATCH 5/8] platform/x86: fujitsu-laptop: switch to a managed hotkey input device Michał Kępień
2017-03-20 9:32 ` Michał Kępień [this message]
2017-03-31 11:22 ` [PATCH 6/8] platform/x86: fujitsu-laptop: use a sparse keymap for hotkey event generation Michał Kępień
2017-04-01 20:00 ` Darren Hart
2017-04-02 9:01 ` Jonathan Woithe
2017-03-20 9:32 ` [PATCH 7/8] platform/x86: fujitsu-laptop: model-dependent sparse keymap overrides Michał Kępień
2017-03-27 0:40 ` Jonathan Woithe
2017-03-20 9:32 ` [PATCH 8/8] platform/x86: fujitsu-laptop: remove keycode fields from struct fujitsu_bl Michał Kępień
2017-03-24 10:49 ` [PATCH 0/8] fujitsu-laptop: use sparse keymaps for input event handling Jonathan Woithe
2017-03-27 23:57 ` Jonathan Woithe
2017-03-28 6:16 ` Michał Kępień
2017-03-28 23:00 ` Jonathan Woithe
2017-03-29 7:19 ` Michał Kępień
2017-03-29 16:35 ` Andy Shevchenko
2017-03-30 3:36 ` Darren Hart
2017-03-30 3:56 ` Jonathan Woithe
2017-03-30 5:04 ` Darren Hart
2017-03-30 6:41 ` Michał Kępień
2017-03-30 22:25 ` Jonathan Woithe
2017-03-29 19:28 ` Darren Hart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170320093224.18541-7-kernel@kempniu.pl \
--to=kernel@kempniu.pl \
--cc=andy@infradead.org \
--cc=dvhart@infradead.org \
--cc=jwoithe@just42.net \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.