diff for duplicates of <20170324072513.GL30608@dragon> diff --git a/a/1.txt b/N1/1.txt index 03564f0..25cf1cd 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,7 +1,7 @@ On Fri, Mar 24, 2017 at 12:29:49PM +0530, Jagan Teki wrote: -> On Fri, Mar 24, 2017 at 10:46 AM, Shawn Guo <shawnguo@kernel.org> wrote: +> On Fri, Mar 24, 2017 at 10:46 AM, Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote: > > On Wed, Mar 22, 2017 at 11:18:10PM +0530, Jagan Teki wrote: -> >> From: Jagan Teki <jagan@amarulasolutions.com> +> >> From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> > >> > >> Add touchscreen node as i2c1 slave device on Engicam Is.IoT MX6UL > >> modules, the touchscreen controlled 'st,stmpe-ts' connected via @@ -10,10 +10,10 @@ On Fri, Mar 24, 2017 at 12:29:49PM +0530, Jagan Teki wrote: > > s/mfb/mfd? > > > >> -> >> Cc: Shawn Guo <shawnguo@kernel.org> -> >> Cc: Matteo Lisi <matteo.lisi@engicam.com> -> >> Cc: Michael Trimarchi <michael@amarulasolutions.com> -> >> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> +> >> Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> +> >> Cc: Matteo Lisi <matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org> +> >> Cc: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> +> >> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> > >> --- > >> arch/arm/boot/dts/imx6ul-isiot-common.dtsi | 34 ++++++++++++++++++++++++++++++ > >> 1 file changed, 34 insertions(+) @@ -27,12 +27,12 @@ On Fri, Mar 24, 2017 at 12:29:49PM +0530, Jagan Teki wrote: > >> */ > >> > >> +&i2c1 { -> >> + touch: stmpe811 at 44 { +> >> + touch: stmpe811@44 { > > > > Label a MFD device 'touch'? Also, the node name should be generic. Not > > sure what should be used for MFD device though. > -> May be I can use stmpe811 at 41 the existing imx6qdl-apalis.dtsi using +> May be I can use stmpe811@41 the existing imx6qdl-apalis.dtsi using > the similar notation. Per application notes of stmpe811 below, I would suggest you name it @@ -74,3 +74,7 @@ Or just pinctrl_stmpe. We do not need to keep compatibility with something not good. Shawn +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index deb84fc..b9d93a0 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -2,16 +2,23 @@ "ref\01490204897-14525-6-git-send-email-jagan@openedev.com\0" "ref\020170324051632.GD30608@dragon\0" "ref\0CAMty3ZBfdjrbvL7F9CbhfD_Wdowr4zM_Rdot=TGKMxq0JPyHjg@mail.gmail.com\0" - "From\0shawnguo@kernel.org (Shawn Guo)\0" - "Subject\0[PATCH 05/12] ARM: dts: imx6ul-isiot-common: Add touchscreen node\0" + "ref\0CAMty3ZBfdjrbvL7F9CbhfD_Wdowr4zM_Rdot=TGKMxq0JPyHjg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org\0" + "From\0Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>\0" + "Subject\0Re: [PATCH 05/12] ARM: dts: imx6ul-isiot-common: Add touchscreen node\0" "Date\0Fri, 24 Mar 2017 15:25:15 +0800\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>\0" + "Cc\0Jagan Teki <jagan-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>" + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + linux-kernel <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> + Matteo Lisi <matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org> + " Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>\0" "\00:1\0" "b\0" "On Fri, Mar 24, 2017 at 12:29:49PM +0530, Jagan Teki wrote:\n" - "> On Fri, Mar 24, 2017 at 10:46 AM, Shawn Guo <shawnguo@kernel.org> wrote:\n" + "> On Fri, Mar 24, 2017 at 10:46 AM, Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:\n" "> > On Wed, Mar 22, 2017 at 11:18:10PM +0530, Jagan Teki wrote:\n" - "> >> From: Jagan Teki <jagan@amarulasolutions.com>\n" + "> >> From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>\n" "> >>\n" "> >> Add touchscreen node as i2c1 slave device on Engicam Is.IoT MX6UL\n" "> >> modules, the touchscreen controlled 'st,stmpe-ts' connected via\n" @@ -20,10 +27,10 @@ "> > s/mfb/mfd?\n" "> >\n" "> >>\n" - "> >> Cc: Shawn Guo <shawnguo@kernel.org>\n" - "> >> Cc: Matteo Lisi <matteo.lisi@engicam.com>\n" - "> >> Cc: Michael Trimarchi <michael@amarulasolutions.com>\n" - "> >> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>\n" + "> >> Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>\n" + "> >> Cc: Matteo Lisi <matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org>\n" + "> >> Cc: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>\n" + "> >> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>\n" "> >> ---\n" "> >> arch/arm/boot/dts/imx6ul-isiot-common.dtsi | 34 ++++++++++++++++++++++++++++++\n" "> >> 1 file changed, 34 insertions(+)\n" @@ -37,12 +44,12 @@ "> >> */\n" "> >>\n" "> >> +&i2c1 {\n" - "> >> + touch: stmpe811 at 44 {\n" + "> >> + touch: stmpe811@44 {\n" "> >\n" "> > Label a MFD device 'touch'? Also, the node name should be generic. Not\n" "> > sure what should be used for MFD device though.\n" "> \n" - "> May be I can use stmpe811 at 41 the existing imx6qdl-apalis.dtsi using\n" + "> May be I can use stmpe811@41 the existing imx6qdl-apalis.dtsi using\n" "> the similar notation.\n" "\n" "Per application notes of stmpe811 below, I would suggest you name it\n" @@ -83,6 +90,10 @@ "\n" "We do not need to keep compatibility with something not good.\n" "\n" - Shawn + "Shawn\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -28f4c27d375c5a625ebd204bcc73ddd14ac49c0dea2991a92a08a8a4a2e8af01 +dd0dd960ab2ce1d55dd45236f687d9e3da3886e7f5b28ccd31d4dafd4602d986
diff --git a/a/1.txt b/N2/1.txt index 03564f0..f152abb 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -27,12 +27,12 @@ On Fri, Mar 24, 2017 at 12:29:49PM +0530, Jagan Teki wrote: > >> */ > >> > >> +&i2c1 { -> >> + touch: stmpe811 at 44 { +> >> + touch: stmpe811@44 { > > > > Label a MFD device 'touch'? Also, the node name should be generic. Not > > sure what should be used for MFD device though. > -> May be I can use stmpe811 at 41 the existing imx6qdl-apalis.dtsi using +> May be I can use stmpe811@41 the existing imx6qdl-apalis.dtsi using > the similar notation. Per application notes of stmpe811 below, I would suggest you name it diff --git a/a/content_digest b/N2/content_digest index deb84fc..99f43d2 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -2,10 +2,16 @@ "ref\01490204897-14525-6-git-send-email-jagan@openedev.com\0" "ref\020170324051632.GD30608@dragon\0" "ref\0CAMty3ZBfdjrbvL7F9CbhfD_Wdowr4zM_Rdot=TGKMxq0JPyHjg@mail.gmail.com\0" - "From\0shawnguo@kernel.org (Shawn Guo)\0" - "Subject\0[PATCH 05/12] ARM: dts: imx6ul-isiot-common: Add touchscreen node\0" + "From\0Shawn Guo <shawnguo@kernel.org>\0" + "Subject\0Re: [PATCH 05/12] ARM: dts: imx6ul-isiot-common: Add touchscreen node\0" "Date\0Fri, 24 Mar 2017 15:25:15 +0800\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Jagan Teki <jagan@amarulasolutions.com>\0" + "Cc\0Jagan Teki <jagan@openedev.com>" + linux-arm-kernel@lists.infradead.org + devicetree@vger.kernel.org + linux-kernel <linux-kernel@vger.kernel.org> + Matteo Lisi <matteo.lisi@engicam.com> + " Michael Trimarchi <michael@amarulasolutions.com>\0" "\00:1\0" "b\0" "On Fri, Mar 24, 2017 at 12:29:49PM +0530, Jagan Teki wrote:\n" @@ -37,12 +43,12 @@ "> >> */\n" "> >>\n" "> >> +&i2c1 {\n" - "> >> + touch: stmpe811 at 44 {\n" + "> >> + touch: stmpe811@44 {\n" "> >\n" "> > Label a MFD device 'touch'? Also, the node name should be generic. Not\n" "> > sure what should be used for MFD device though.\n" "> \n" - "> May be I can use stmpe811 at 41 the existing imx6qdl-apalis.dtsi using\n" + "> May be I can use stmpe811@41 the existing imx6qdl-apalis.dtsi using\n" "> the similar notation.\n" "\n" "Per application notes of stmpe811 below, I would suggest you name it\n" @@ -85,4 +91,4 @@ "\n" Shawn -28f4c27d375c5a625ebd204bcc73ddd14ac49c0dea2991a92a08a8a4a2e8af01 +570f0432c0130b8140714388c69d5eb449a87a099bfd1aa1e9af5fdebffa8445
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.