diff for duplicates of <20170324073540.GN30608@dragon> diff --git a/a/1.txt b/N1/1.txt index e2baa85..bbc63af 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,9 +1,9 @@ On Fri, Mar 24, 2017 at 01:02:35PM +0530, Jagan Teki wrote: -> On Fri, Mar 24, 2017 at 12:55 PM, Shawn Guo <shawnguo@kernel.org> wrote: +> On Fri, Mar 24, 2017 at 12:55 PM, Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote: > > On Fri, Mar 24, 2017 at 12:29:49PM +0530, Jagan Teki wrote: -> >> On Fri, Mar 24, 2017 at 10:46 AM, Shawn Guo <shawnguo@kernel.org> wrote: +> >> On Fri, Mar 24, 2017 at 10:46 AM, Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote: > >> > On Wed, Mar 22, 2017 at 11:18:10PM +0530, Jagan Teki wrote: -> >> >> From: Jagan Teki <jagan@amarulasolutions.com> +> >> >> From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> > >> >> > >> >> Add touchscreen node as i2c1 slave device on Engicam Is.IoT MX6UL > >> >> modules, the touchscreen controlled 'st,stmpe-ts' connected via @@ -12,10 +12,10 @@ On Fri, Mar 24, 2017 at 01:02:35PM +0530, Jagan Teki wrote: > >> > s/mfb/mfd? > >> > > >> >> -> >> >> Cc: Shawn Guo <shawnguo@kernel.org> -> >> >> Cc: Matteo Lisi <matteo.lisi@engicam.com> -> >> >> Cc: Michael Trimarchi <michael@amarulasolutions.com> -> >> >> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> +> >> >> Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> +> >> >> Cc: Matteo Lisi <matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org> +> >> >> Cc: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> +> >> >> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> > >> >> --- > >> >> arch/arm/boot/dts/imx6ul-isiot-common.dtsi | 34 ++++++++++++++++++++++++++++++ > >> >> 1 file changed, 34 insertions(+) @@ -29,12 +29,12 @@ On Fri, Mar 24, 2017 at 01:02:35PM +0530, Jagan Teki wrote: > >> >> */ > >> >> > >> >> +&i2c1 { -> >> >> + touch: stmpe811 at 44 { +> >> >> + touch: stmpe811@44 { > >> > > >> > Label a MFD device 'touch'? Also, the node name should be generic. Not > >> > sure what should be used for MFD device though. > >> -> >> May be I can use stmpe811 at 41 the existing imx6qdl-apalis.dtsi using +> >> May be I can use stmpe811@41 the existing imx6qdl-apalis.dtsi using > >> the similar notation. > > > > Per application notes of stmpe811 below, I would suggest you name it @@ -44,8 +44,12 @@ On Fri, Mar 24, 2017 at 01:02:35PM +0530, Jagan Teki wrote: > > OK, will this be ok? > -> stmpe811: gpio-expander at 44 { +> stmpe811: gpio-expander@44 { Yes. Shawn +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 85dbe50..9e22245 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -4,18 +4,25 @@ "ref\0CAMty3ZBfdjrbvL7F9CbhfD_Wdowr4zM_Rdot=TGKMxq0JPyHjg@mail.gmail.com\0" "ref\020170324072513.GL30608@dragon\0" "ref\0CAMty3ZAiSPGKzJK9EcgaPMf55A5W+bW8PvkHOAjRawWA_2_aVA@mail.gmail.com\0" - "From\0shawnguo@kernel.org (Shawn Guo)\0" - "Subject\0[PATCH 05/12] ARM: dts: imx6ul-isiot-common: Add touchscreen node\0" + "ref\0CAMty3ZAiSPGKzJK9EcgaPMf55A5W+bW8PvkHOAjRawWA_2_aVA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org\0" + "From\0Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>\0" + "Subject\0Re: [PATCH 05/12] ARM: dts: imx6ul-isiot-common: Add touchscreen node\0" "Date\0Fri, 24 Mar 2017 15:35:42 +0800\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>\0" + "Cc\0Jagan Teki <jagan-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>" + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + linux-kernel <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> + Matteo Lisi <matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org> + " Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>\0" "\00:1\0" "b\0" "On Fri, Mar 24, 2017 at 01:02:35PM +0530, Jagan Teki wrote:\n" - "> On Fri, Mar 24, 2017 at 12:55 PM, Shawn Guo <shawnguo@kernel.org> wrote:\n" + "> On Fri, Mar 24, 2017 at 12:55 PM, Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:\n" "> > On Fri, Mar 24, 2017 at 12:29:49PM +0530, Jagan Teki wrote:\n" - "> >> On Fri, Mar 24, 2017 at 10:46 AM, Shawn Guo <shawnguo@kernel.org> wrote:\n" + "> >> On Fri, Mar 24, 2017 at 10:46 AM, Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:\n" "> >> > On Wed, Mar 22, 2017 at 11:18:10PM +0530, Jagan Teki wrote:\n" - "> >> >> From: Jagan Teki <jagan@amarulasolutions.com>\n" + "> >> >> From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>\n" "> >> >>\n" "> >> >> Add touchscreen node as i2c1 slave device on Engicam Is.IoT MX6UL\n" "> >> >> modules, the touchscreen controlled 'st,stmpe-ts' connected via\n" @@ -24,10 +31,10 @@ "> >> > s/mfb/mfd?\n" "> >> >\n" "> >> >>\n" - "> >> >> Cc: Shawn Guo <shawnguo@kernel.org>\n" - "> >> >> Cc: Matteo Lisi <matteo.lisi@engicam.com>\n" - "> >> >> Cc: Michael Trimarchi <michael@amarulasolutions.com>\n" - "> >> >> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>\n" + "> >> >> Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>\n" + "> >> >> Cc: Matteo Lisi <matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org>\n" + "> >> >> Cc: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>\n" + "> >> >> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>\n" "> >> >> ---\n" "> >> >> arch/arm/boot/dts/imx6ul-isiot-common.dtsi | 34 ++++++++++++++++++++++++++++++\n" "> >> >> 1 file changed, 34 insertions(+)\n" @@ -41,12 +48,12 @@ "> >> >> */\n" "> >> >>\n" "> >> >> +&i2c1 {\n" - "> >> >> + touch: stmpe811 at 44 {\n" + "> >> >> + touch: stmpe811@44 {\n" "> >> >\n" "> >> > Label a MFD device 'touch'? Also, the node name should be generic. Not\n" "> >> > sure what should be used for MFD device though.\n" "> >>\n" - "> >> May be I can use stmpe811 at 41 the existing imx6qdl-apalis.dtsi using\n" + "> >> May be I can use stmpe811@41 the existing imx6qdl-apalis.dtsi using\n" "> >> the similar notation.\n" "> >\n" "> > Per application notes of stmpe811 below, I would suggest you name it\n" @@ -56,10 +63,14 @@ "> \n" "> OK, will this be ok?\n" "> \n" - "> stmpe811: gpio-expander at 44 {\n" + "> stmpe811: gpio-expander@44 {\n" "\n" "Yes.\n" "\n" - Shawn + "Shawn\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -d42fbbabee734c7b1e821e612bd04c862e7eea42b88d32b2b71a7d8df82b8f75 +b06a3c038db1d2b9cd297e168e5356ce7049927a328b193f542b0f3fd9e0bdfc
diff --git a/a/1.txt b/N2/1.txt index e2baa85..472b325 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -29,12 +29,12 @@ On Fri, Mar 24, 2017 at 01:02:35PM +0530, Jagan Teki wrote: > >> >> */ > >> >> > >> >> +&i2c1 { -> >> >> + touch: stmpe811 at 44 { +> >> >> + touch: stmpe811@44 { > >> > > >> > Label a MFD device 'touch'? Also, the node name should be generic. Not > >> > sure what should be used for MFD device though. > >> -> >> May be I can use stmpe811 at 41 the existing imx6qdl-apalis.dtsi using +> >> May be I can use stmpe811@41 the existing imx6qdl-apalis.dtsi using > >> the similar notation. > > > > Per application notes of stmpe811 below, I would suggest you name it @@ -44,7 +44,7 @@ On Fri, Mar 24, 2017 at 01:02:35PM +0530, Jagan Teki wrote: > > OK, will this be ok? > -> stmpe811: gpio-expander at 44 { +> stmpe811: gpio-expander@44 { Yes. diff --git a/a/content_digest b/N2/content_digest index 85dbe50..e4329c2 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -4,10 +4,16 @@ "ref\0CAMty3ZBfdjrbvL7F9CbhfD_Wdowr4zM_Rdot=TGKMxq0JPyHjg@mail.gmail.com\0" "ref\020170324072513.GL30608@dragon\0" "ref\0CAMty3ZAiSPGKzJK9EcgaPMf55A5W+bW8PvkHOAjRawWA_2_aVA@mail.gmail.com\0" - "From\0shawnguo@kernel.org (Shawn Guo)\0" - "Subject\0[PATCH 05/12] ARM: dts: imx6ul-isiot-common: Add touchscreen node\0" + "From\0Shawn Guo <shawnguo@kernel.org>\0" + "Subject\0Re: [PATCH 05/12] ARM: dts: imx6ul-isiot-common: Add touchscreen node\0" "Date\0Fri, 24 Mar 2017 15:35:42 +0800\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Jagan Teki <jagan@amarulasolutions.com>\0" + "Cc\0Jagan Teki <jagan@openedev.com>" + linux-arm-kernel@lists.infradead.org + devicetree@vger.kernel.org + linux-kernel <linux-kernel@vger.kernel.org> + Matteo Lisi <matteo.lisi@engicam.com> + " Michael Trimarchi <michael@amarulasolutions.com>\0" "\00:1\0" "b\0" "On Fri, Mar 24, 2017 at 01:02:35PM +0530, Jagan Teki wrote:\n" @@ -41,12 +47,12 @@ "> >> >> */\n" "> >> >>\n" "> >> >> +&i2c1 {\n" - "> >> >> + touch: stmpe811 at 44 {\n" + "> >> >> + touch: stmpe811@44 {\n" "> >> >\n" "> >> > Label a MFD device 'touch'? Also, the node name should be generic. Not\n" "> >> > sure what should be used for MFD device though.\n" "> >>\n" - "> >> May be I can use stmpe811 at 41 the existing imx6qdl-apalis.dtsi using\n" + "> >> May be I can use stmpe811@41 the existing imx6qdl-apalis.dtsi using\n" "> >> the similar notation.\n" "> >\n" "> > Per application notes of stmpe811 below, I would suggest you name it\n" @@ -56,10 +62,10 @@ "> \n" "> OK, will this be ok?\n" "> \n" - "> stmpe811: gpio-expander at 44 {\n" + "> stmpe811: gpio-expander@44 {\n" "\n" "Yes.\n" "\n" Shawn -d42fbbabee734c7b1e821e612bd04c862e7eea42b88d32b2b71a7d8df82b8f75 +5d56581242ecd447bfec1325471ac5c0898e6035369cd78ecbc3140ca1afedf0
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.