[PATCH 4.10 024/111] net: solve a NAPI race

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>


commit 39e6c8208d7b6fb9d2047850fb3327db567b564b upstream.

While playing with mlx4 hardware timestamping of RX packets, I found
that some packets were received by TCP stack with a ~200 ms delay...

Since the timestamp was provided by the NIC, and my probe was added
in tcp_v4_rcv() while in BH handler, I was confident it was not
a sender issue, or a drop in the network.

This would happen with a very low probability, but hurting RPC
workloads.

A NAPI driver normally arms the IRQ after the napi_complete_done(),
after NAPI_STATE_SCHED is cleared, so that the hard irq handler can grab
it.

Problem is that if another point in the stack grabs NAPI_STATE_SCHED bit
while IRQ are not disabled, we might have later an IRQ firing and
finding this bit set, right before napi_complete_done() clears it.

This can happen with busy polling users, or if gro_flush_timeout is
used. But some other uses of napi_schedule() in drivers can cause this
as well.

thread 1                                 thread 2 (could be on same cpu, or not)

// busy polling or napi_watchdog()
napi_schedule();
...
napi->poll()

device polling:
read 2 packets from ring buffer
                                          Additional 3rd packet is
available.
                                          device hard irq

                                          // does nothing because
NAPI_STATE_SCHED bit is owned by thread 1
                                          napi_schedule();

napi_complete_done(napi, 2);
rearm_irq();

Note that rearm_irq() will not force the device to send an additional
IRQ for the packet it already signaled (3rd packet in my example)

This patch adds a new NAPI_STATE_MISSED bit, that napi_schedule_prep()
can set if it could not grab NAPI_STATE_SCHED

Then napi_complete_done() properly reschedules the napi to make sure
we do not miss something.

Since we manipulate multiple bits at once, use cmpxchg() like in
sk_busy_loop() to provide proper transactions.

In v2, I changed napi_watchdog() to use a relaxed variant of
napi_schedule_prep() : No need to set NAPI_STATE_MISSED from this point.

In v3, I added more details in the changelog and clears
NAPI_STATE_MISSED in busy_poll_stop()

In v4, I added the ideas given by Alexander Duyck in v3 review

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/netdevice.h |   29 +++++-----------
 net/core/dev.c            |   81 ++++++++++++++++++++++++++++++++++++++++++----
 2 files changed, 83 insertions(+), 27 deletions(-)

--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -330,6 +330,7 @@ struct napi_struct {
 
 enum {
 	NAPI_STATE_SCHED,	/* Poll is scheduled */
+	NAPI_STATE_MISSED,	/* reschedule a napi */
 	NAPI_STATE_DISABLE,	/* Disable pending */
 	NAPI_STATE_NPSVC,	/* Netpoll - don't dequeue from poll_list */
 	NAPI_STATE_HASHED,	/* In NAPI hash (busy polling possible) */
@@ -338,12 +339,13 @@ enum {
 };
 
 enum {
-	NAPIF_STATE_SCHED	 = (1UL << NAPI_STATE_SCHED),
-	NAPIF_STATE_DISABLE	 = (1UL << NAPI_STATE_DISABLE),
-	NAPIF_STATE_NPSVC	 = (1UL << NAPI_STATE_NPSVC),
-	NAPIF_STATE_HASHED	 = (1UL << NAPI_STATE_HASHED),
-	NAPIF_STATE_NO_BUSY_POLL = (1UL << NAPI_STATE_NO_BUSY_POLL),
-	NAPIF_STATE_IN_BUSY_POLL = (1UL << NAPI_STATE_IN_BUSY_POLL),
+	NAPIF_STATE_SCHED	 = BIT(NAPI_STATE_SCHED),
+	NAPIF_STATE_MISSED	 = BIT(NAPI_STATE_MISSED),
+	NAPIF_STATE_DISABLE	 = BIT(NAPI_STATE_DISABLE),
+	NAPIF_STATE_NPSVC	 = BIT(NAPI_STATE_NPSVC),
+	NAPIF_STATE_HASHED	 = BIT(NAPI_STATE_HASHED),
+	NAPIF_STATE_NO_BUSY_POLL = BIT(NAPI_STATE_NO_BUSY_POLL),
+	NAPIF_STATE_IN_BUSY_POLL = BIT(NAPI_STATE_IN_BUSY_POLL),
 };
 
 enum gro_result {
@@ -413,20 +415,7 @@ static inline bool napi_disable_pending(
 	return test_bit(NAPI_STATE_DISABLE, &n->state);
 }
 
-/**
- *	napi_schedule_prep - check if NAPI can be scheduled
- *	@n: NAPI context
- *
- * Test if NAPI routine is already running, and if not mark
- * it as running.  This is used as a condition variable to
- * insure only one NAPI poll instance runs.  We also make
- * sure there is no pending NAPI disable.
- */
-static inline bool napi_schedule_prep(struct napi_struct *n)
-{
-	return !napi_disable_pending(n) &&
-		!test_and_set_bit(NAPI_STATE_SCHED, &n->state);
-}
+bool napi_schedule_prep(struct napi_struct *n);
 
 /**
  *	napi_schedule - schedule NAPI poll
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -4913,6 +4913,39 @@ void __napi_schedule(struct napi_struct
 EXPORT_SYMBOL(__napi_schedule);
 
 /**
+ *	napi_schedule_prep - check if napi can be scheduled
+ *	@n: napi context
+ *
+ * Test if NAPI routine is already running, and if not mark
+ * it as running.  This is used as a condition variable
+ * insure only one NAPI poll instance runs.  We also make
+ * sure there is no pending NAPI disable.
+ */
+bool napi_schedule_prep(struct napi_struct *n)
+{
+	unsigned long val, new;
+
+	do {
+		val = READ_ONCE(n->state);
+		if (unlikely(val & NAPIF_STATE_DISABLE))
+			return false;
+		new = val | NAPIF_STATE_SCHED;
+
+		/* Sets STATE_MISSED bit if STATE_SCHED was already set
+		 * This was suggested by Alexander Duyck, as compiler
+		 * emits better code than :
+		 * if (val & NAPIF_STATE_SCHED)
+		 *     new |= NAPIF_STATE_MISSED;
+		 */
+		new |= (val & NAPIF_STATE_SCHED) / NAPIF_STATE_SCHED *
+						   NAPIF_STATE_MISSED;
+	} while (cmpxchg(&n->state, val, new) != val);
+
+	return !(val & NAPIF_STATE_SCHED);
+}
+EXPORT_SYMBOL(napi_schedule_prep);
+
+/**
  * __napi_schedule_irqoff - schedule for receive
  * @n: entry to schedule
  *
@@ -4943,7 +4976,7 @@ EXPORT_SYMBOL(__napi_complete);
 
 bool napi_complete_done(struct napi_struct *n, int work_done)
 {
-	unsigned long flags;
+	unsigned long flags, val, new;
 
 	/*
 	 * 1) Don't let napi dequeue from the cpu poll list
@@ -4967,14 +5000,33 @@ bool napi_complete_done(struct napi_stru
 		else
 			napi_gro_flush(n, false);
 	}
-	if (likely(list_empty(&n->poll_list))) {
-		WARN_ON_ONCE(!test_and_clear_bit(NAPI_STATE_SCHED, &n->state));
-	} else {
+	if (unlikely(!list_empty(&n->poll_list))) {
 		/* If n->poll_list is not empty, we need to mask irqs */
 		local_irq_save(flags);
-		__napi_complete(n);
+		list_del_init(&n->poll_list);
 		local_irq_restore(flags);
 	}
+
+	do {
+		val = READ_ONCE(n->state);
+
+		WARN_ON_ONCE(!(val & NAPIF_STATE_SCHED));
+
+		new = val & ~(NAPIF_STATE_MISSED | NAPIF_STATE_SCHED);
+
+		/* If STATE_MISSED was set, leave STATE_SCHED set,
+		 * because we will call napi->poll() one more time.
+		 * This C code was suggested by Alexander Duyck to help gcc.
+		 */
+		new |= (val & NAPIF_STATE_MISSED) / NAPIF_STATE_MISSED *
+						    NAPIF_STATE_SCHED;
+	} while (cmpxchg(&n->state, val, new) != val);
+
+	if (unlikely(val & NAPIF_STATE_MISSED)) {
+		__napi_schedule(n);
+		return false;
+	}
+
 	return true;
 }
 EXPORT_SYMBOL(napi_complete_done);
@@ -5000,6 +5052,16 @@ static void busy_poll_stop(struct napi_s
 {
 	int rc;
 
+	/* Busy polling means there is a high chance device driver hard irq
+	 * could not grab NAPI_STATE_SCHED, and that NAPI_STATE_MISSED was
+	 * set in napi_schedule_prep().
+	 * Since we are about to call napi->poll() once more, we can safely
+	 * clear NAPI_STATE_MISSED.
+	 *
+	 * Note: x86 could use a single "lock and ..." instruction
+	 * to perform these two clear_bit()
+	 */
+	clear_bit(NAPI_STATE_MISSED, &napi->state);
 	clear_bit(NAPI_STATE_IN_BUSY_POLL, &napi->state);
 
 	local_bh_disable();
@@ -5146,8 +5208,13 @@ static enum hrtimer_restart napi_watchdo
 	struct napi_struct *napi;
 
 	napi = container_of(timer, struct napi_struct, timer);
-	if (napi->gro_list)
-		napi_schedule(napi);
+
+	/* Note : we use a relaxed variant of napi_schedule_prep() not setting
+	 * NAPI_STATE_MISSED, since we do not react to a device IRQ.
+	 */
+	if (napi->gro_list && !napi_disable_pending(napi) &&
+	    !test_and_set_bit(NAPI_STATE_SCHED, &napi->state))
+		__napi_schedule_irqoff(napi);
 
 	return HRTIMER_NORESTART;
 }