From: Gautham R Shenoy <ego@linux.vnet.ibm.com>
To: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>,
Michael Neuling <mikey@neuling.org>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
"Shreyas B. Prabhu" <shreyasbp@gmail.com>,
Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>,
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>,
Anton Blanchard <anton@samba.org>,
Balbir Singh <bsingharora@gmail.com>,
Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>,
Nicholas Piggin <npiggin@gmail.com>,
Mahesh J Salgaonkar <mahesh@linux.vnet.ibm.com>,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: Re: [v3 PATCH 2/4] powernv:smp: Add busy-wait loop as fall back for CPU-Hotplug
Date: Thu, 30 Mar 2017 14:49:15 +0530 [thread overview]
Message-ID: <20170330091915.GA12109@in.ibm.com> (raw)
In-Reply-To: <87fuhzdjwv.fsf@concordia.ellerman.id.au>
On Mon, Mar 27, 2017 at 10:43:44PM +1100, Michael Ellerman wrote:
> "Gautham R. Shenoy" <ego@linux.vnet.ibm.com> writes:
>
> > diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
> > index 419edff..f335e0f 100644
> > --- a/arch/powerpc/platforms/powernv/idle.c
> > +++ b/arch/powerpc/platforms/powernv/idle.c
> > @@ -283,8 +283,16 @@ unsigned long pnv_cpu_offline(unsigned int cpu)
> > } else if ((idle_states & OPAL_PM_SLEEP_ENABLED) ||
> > (idle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
> > srr1 = power7_sleep();
> > - } else {
> > + } else if (idle_states & OPAL_PM_NAP_ENABLED) {
> > srr1 = power7_nap(1);
> > + } else {
> > + /* This is the fallback method. We emulate snooze */
> > + while (!generic_check_cpu_restart(cpu)) {
>
> Breaks the SMP=n build :/
Hmmm.. Looks like I have missed adding a CONFIG_HOTPLUG_CPU somewhere.
>
> arch/powerpc/platforms/powernv/idle.c:299:11: error: implicit declaration of function 'generic_check_cpu_restart' [-Werror=implicit-function-declaration]
>
Could you add the following patch as the PATCH 1 in the series instead
of what was present in this series ? It adds a CONFIG_HOTPLUG_CPU
around pnv_cpu_offline(). I have compiled it with both all
combinations of CONFIG_HOTPLUG_CPU and CONFIG_SMP and it builds fine.
----------------------------x-----x-----x-------------------------------
powernv: Move CPU-Offline idle state invocation from smp.c to idle.c
Move the piece of code in powernv/smp.c::pnv_smp_cpu_kill_self() which
transitions the CPU to the deepest available platform idle state to a
new function named pnv_cpu_offline() in powernv/idle.c. The rationale
behind this code movement is that the data required to determine the
deepest available platform state resides in powernv/idle.c.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
---
Restricts pnv_cpu_offline() to CONFIG_HOTPLUG_CPU
arch/powerpc/include/asm/cpuidle.h | 1 +
arch/powerpc/platforms/powernv/idle.c | 27 +++++++++++++++++++++++++++
arch/powerpc/platforms/powernv/powernv.h | 2 --
arch/powerpc/platforms/powernv/smp.c | 18 ++----------------
4 files changed, 30 insertions(+), 18 deletions(-)
diff --git a/arch/powerpc/include/asm/cpuidle.h b/arch/powerpc/include/asm/cpuidle.h
index 1557315..4649ca0 100644
--- a/arch/powerpc/include/asm/cpuidle.h
+++ b/arch/powerpc/include/asm/cpuidle.h
@@ -46,6 +46,7 @@
extern u64 pnv_first_deep_stop_state;
+unsigned long pnv_cpu_offline(unsigned int cpu);
int validate_psscr_val_mask(u64 *psscr_val, u64 *psscr_mask, u32 flags);
static inline void report_invalid_psscr_val(u64 psscr_val, int err)
{
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 4ee837e..fafafa3 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -265,6 +265,33 @@ static void power9_idle(void)
u64 pnv_deepest_stop_psscr_val;
u64 pnv_deepest_stop_psscr_mask;
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * pnv_cpu_offline: A function that puts the CPU into the deepest
+ * available platform idle state on a CPU-Offline.
+ */
+unsigned long pnv_cpu_offline(unsigned int cpu)
+{
+ unsigned long srr1;
+
+ u32 idle_states = pnv_get_supported_cpuidle_states();
+
+ if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+ srr1 = power9_idle_stop(pnv_deepest_stop_psscr_val,
+ pnv_deepest_stop_psscr_mask);
+ } else if (idle_states & OPAL_PM_WINKLE_ENABLED) {
+ srr1 = power7_winkle();
+ } else if ((idle_states & OPAL_PM_SLEEP_ENABLED) ||
+ (idle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
+ srr1 = power7_sleep();
+ } else {
+ srr1 = power7_nap(1);
+ }
+
+ return srr1;
+}
+#endif
+
/*
* Power ISA 3.0 idle initialization.
*
diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h
index 6130522..6dbc0a1 100644
--- a/arch/powerpc/platforms/powernv/powernv.h
+++ b/arch/powerpc/platforms/powernv/powernv.h
@@ -18,8 +18,6 @@ static inline void pnv_pci_shutdown(void) { }
#endif
extern u32 pnv_get_supported_cpuidle_states(void);
-extern u64 pnv_deepest_stop_psscr_val;
-extern u64 pnv_deepest_stop_psscr_mask;
extern void pnv_lpc_init(void);
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index 8b67e1e..914b456 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -35,6 +35,7 @@
#include <asm/dbell.h>
#include <asm/kvm_ppc.h>
#include <asm/ppc-opcode.h>
+#include <asm/cpuidle.h>
#include "powernv.h"
@@ -140,7 +141,6 @@ static void pnv_smp_cpu_kill_self(void)
{
unsigned int cpu;
unsigned long srr1, wmask;
- u32 idle_states;
/* Standard hot unplug procedure */
local_irq_disable();
@@ -155,8 +155,6 @@ static void pnv_smp_cpu_kill_self(void)
if (cpu_has_feature(CPU_FTR_ARCH_207S))
wmask = SRR1_WAKEMASK_P8;
- idle_states = pnv_get_supported_cpuidle_states();
-
/* We don't want to take decrementer interrupts while we are offline,
* so clear LPCR:PECE1. We keep PECE2 (and LPCR_PECE_HVEE on P9)
* enabled as to let IPIs in.
@@ -184,19 +182,7 @@ static void pnv_smp_cpu_kill_self(void)
kvmppc_set_host_ipi(cpu, 0);
ppc64_runlatch_off();
-
- if (cpu_has_feature(CPU_FTR_ARCH_300)) {
- srr1 = power9_idle_stop(pnv_deepest_stop_psscr_val,
- pnv_deepest_stop_psscr_mask);
- } else if (idle_states & OPAL_PM_WINKLE_ENABLED) {
- srr1 = power7_winkle();
- } else if ((idle_states & OPAL_PM_SLEEP_ENABLED) ||
- (idle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
- srr1 = power7_sleep();
- } else {
- srr1 = power7_nap(1);
- }
-
+ srr1 = pnv_cpu_offline(cpu);
ppc64_runlatch_on();
/*
--
1.9.4
next prev parent reply other threads:[~2017-03-30 9:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-22 15:04 [v3 PATCH 0/4] powernv:idle: Fixes for CPU-Hotplug on POWER DD1.0 Gautham R. Shenoy
2017-03-22 15:04 ` [v3 PATCH 1/4] powernv: Move CPU-Offline idle state invocation from smp.c to idle.c Gautham R. Shenoy
2017-04-12 13:31 ` [v3, " Michael Ellerman
2017-03-22 15:04 ` [v3 PATCH 2/4] powernv:smp: Add busy-wait loop as fall back for CPU-Hotplug Gautham R. Shenoy
2017-03-27 11:43 ` Michael Ellerman
2017-03-30 9:19 ` Gautham R Shenoy [this message]
2017-03-22 15:04 ` [v3 PATCH 3/4] powernv:idle: Don't override default/deepest directly in kernel Gautham R. Shenoy
2017-03-22 15:04 ` [v3 PATCH 4/4] powernv: Recover correct PACA on wakeup from a stop on P9 DD1 Gautham R. Shenoy
2017-03-22 16:06 ` Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170330091915.GA12109@in.ibm.com \
--to=ego@linux.vnet.ibm.com \
--cc=akshay.adiga@linux.vnet.ibm.com \
--cc=anton@samba.org \
--cc=benh@kernel.crashing.org \
--cc=bsingharora@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mahesh@linux.vnet.ibm.com \
--cc=mikey@neuling.org \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=shilpa.bhat@linux.vnet.ibm.com \
--cc=shreyasbp@gmail.com \
--cc=svaidy@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.