From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Tony Lindgren <tony@atomide.com>,
Bin Liu <b-liu@ti.com>
Subject: [PATCH 4.9 16/16] usb: musb: fix possible spinlock deadlock
Date: Thu, 30 Mar 2017 12:16:07 +0200 [thread overview]
Message-ID: <20170330100432.195149121@linuxfoundation.org> (raw)
In-Reply-To: <20170330100431.550322562@linuxfoundation.org>
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bin Liu <b-liu@ti.com>
commit bc1e2154542071e3cfe1734b143af9b8bdacf8bd upstream.
The DSPS glue calls del_timer_sync() in its musb_platform_disable()
implementation, which requires the caller to not hold a lock. But
musb_remove() calls musb_platform_disable() will musb->lock held. This
could causes spinlock deadlock.
So change musb_remove() to call musb_platform_disable() without holds
musb->lock. This doesn't impact the musb_platform_disable implementation
in other glue drivers.
root@am335x-evm:~# modprobe -r musb-dsps
[ 126.134879] musb-hdrc musb-hdrc.1: remove, state 1
[ 126.140465] usb usb2: USB disconnect, device number 1
[ 126.146178] usb 2-1: USB disconnect, device number 2
[ 126.416985] musb-hdrc musb-hdrc.1: USB bus 2 deregistered
[ 126.423943]
[ 126.425525] ======================================================
[ 126.431997] [ INFO: possible circular locking dependency detected ]
[ 126.438564] 4.11.0-rc1-00003-g1557f13bca04-dirty #77 Not tainted
[ 126.444852] -------------------------------------------------------
[ 126.451414] modprobe/778 is trying to acquire lock:
[ 126.456523] (((&glue->timer))){+.-...}, at: [<c01b8788>] del_timer_sync+0x0/0xd0
[ 126.464403]
[ 126.464403] but task is already holding lock:
[ 126.470511] (&(&musb->lock)->rlock){-.-...}, at: [<bf30b7f8>] musb_remove+0x50/0x1
30 [musb_hdrc]
[ 126.479965]
[ 126.479965] which lock already depends on the new lock.
[ 126.479965]
[ 126.488531]
[ 126.488531] the existing dependency chain (in reverse order) is:
[ 126.496368]
[ 126.496368] -> #1 (&(&musb->lock)->rlock){-.-...}:
[ 126.502968] otg_timer+0x80/0xec [musb_dsps]
[ 126.507990] call_timer_fn+0xb4/0x390
[ 126.512372] expire_timers+0xf0/0x1fc
[ 126.516754] run_timer_softirq+0x80/0x178
[ 126.521511] __do_softirq+0xc4/0x554
[ 126.525802] irq_exit+0xe8/0x158
[ 126.529735] __handle_domain_irq+0x58/0xb8
[ 126.534583] __irq_usr+0x54/0x80
[ 126.538507]
[ 126.538507] -> #0 (((&glue->timer))){+.-...}:
[ 126.544636] del_timer_sync+0x40/0xd0
[ 126.549066] musb_remove+0x6c/0x130 [musb_hdrc]
[ 126.554370] platform_drv_remove+0x24/0x3c
[ 126.559206] device_release_driver_internal+0x14c/0x1e0
[ 126.565225] bus_remove_device+0xd8/0x108
[ 126.569970] device_del+0x1e4/0x308
[ 126.574170] platform_device_del+0x24/0x8c
[ 126.579006] platform_device_unregister+0xc/0x20
[ 126.584394] dsps_remove+0x14/0x30 [musb_dsps]
[ 126.589595] platform_drv_remove+0x24/0x3c
[ 126.594432] device_release_driver_internal+0x14c/0x1e0
[ 126.600450] driver_detach+0x38/0x6c
[ 126.604740] bus_remove_driver+0x4c/0xa0
[ 126.609407] SyS_delete_module+0x11c/0x1e4
[ 126.614252] __sys_trace_return+0x0/0x10
Fixes: ea2f35c01d5ea ("usb: musb: Fix sleeping function called from invalid context for hdrc glue")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/musb/musb_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2467,8 +2467,8 @@ static int musb_remove(struct platform_d
pm_runtime_get_sync(musb->controller);
musb_host_cleanup(musb);
musb_gadget_cleanup(musb);
- spin_lock_irqsave(&musb->lock, flags);
musb_platform_disable(musb);
+ spin_lock_irqsave(&musb->lock, flags);
musb_generic_disable(musb);
spin_unlock_irqrestore(&musb->lock, flags);
musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
next prev parent reply other threads:[~2017-03-30 10:17 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-30 10:15 [PATCH 4.9 00/16] 4.9.20-stable review Greg Kroah-Hartman
2017-03-30 10:15 ` [PATCH 4.9 01/16] xfrm: policy: init locks early Greg Kroah-Hartman
2017-03-30 10:15 ` [PATCH 4.9 02/16] xfrm_user: validate XFRM_MSG_NEWAE XFRMA_REPLAY_ESN_VAL replay_window Greg Kroah-Hartman
2017-03-30 10:15 ` [PATCH 4.9 03/16] xfrm_user: validate XFRM_MSG_NEWAE incoming ESN size harder Greg Kroah-Hartman
2017-03-30 10:15 ` [PATCH 4.9 04/16] KVM: x86: cleanup the page tracking SRCU instance Greg Kroah-Hartman
2017-03-30 10:15 ` [PATCH 4.9 05/16] virtio_balloon: init 1st buffer in stats vq Greg Kroah-Hartman
2017-03-30 10:15 ` [PATCH 4.9 06/16] pinctrl: qcom: Dont clear status bit on irq_unmask Greg Kroah-Hartman
2017-03-30 10:15 ` [PATCH 4.9 07/16] c6x/ptrace: Remove useless PTRACE_SETREGSET implementation Greg Kroah-Hartman
2017-03-30 10:15 ` [PATCH 4.9 08/16] h8300/ptrace: Fix incorrect register transfer count Greg Kroah-Hartman
2017-03-30 10:16 ` [PATCH 4.9 09/16] mips/ptrace: Preserve previous registers for short regset write Greg Kroah-Hartman
2017-03-30 10:16 ` [PATCH 4.9 10/16] sparc/ptrace: " Greg Kroah-Hartman
2017-03-30 10:16 ` [PATCH 4.9 11/16] metag/ptrace: " Greg Kroah-Hartman
2017-03-30 10:16 ` [PATCH 4.9 12/16] metag/ptrace: Provide default TXSTATUS for short NT_PRSTATUS Greg Kroah-Hartman
2017-03-30 10:16 ` [PATCH 4.9 13/16] metag/ptrace: Reject partial NT_METAG_RPIPE writes Greg Kroah-Hartman
2017-03-30 10:16 ` [PATCH 4.9 14/16] fscrypt: remove broken support for detecting keyring key revocation Greg Kroah-Hartman
2017-03-30 10:16 ` [PATCH 4.9 15/16] sched/rt: Add a missing rescheduling point Greg Kroah-Hartman
2017-03-30 10:16 ` Greg Kroah-Hartman [this message]
2017-03-30 18:55 ` [PATCH 4.9 00/16] 4.9.20-stable review Shuah Khan
2017-03-31 3:45 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170330100432.195149121@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=b-liu@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.