[PATCH 12/13] ftgmac100: Remove useless tests in interrupt handler

[Benjamin Herrenschmidt <benh@kernel.crashing.org>]

The interrupt is neither enabled nor registered when the interface
isn't running (regardless of whether we use nc-si or not) so the
test isn't useful.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 9647b7c..dc85d78 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1049,14 +1049,9 @@ static irqreturn_t ftgmac100_interrupt(int irq, void *dev_id)
 	struct net_device *netdev = dev_id;
 	struct ftgmac100 *priv = netdev_priv(netdev);
 
-	/* When running in NCSI mode, the interface should be ready for
-	 * receiving or transmitting NCSI packets before it's opened.
-	 */
-	if (likely(priv->use_ncsi || netif_running(netdev))) {
-		/* Disable interrupts for polling */
-		iowrite32(0, priv->base + FTGMAC100_OFFSET_IER);
-		napi_schedule(&priv->napi);
-	}
+	/* Disable interrupts for polling */
+	iowrite32(0, priv->base + FTGMAC100_OFFSET_IER);
+	napi_schedule(&priv->napi);
 
 	return IRQ_HANDLED;
 }
-- 
2.9.3