From: Sahid Orentino Ferdjaoui <sferdjao@redhat.com>
To: Anthony Xu <anthony.xu@intel.com>
Cc: qemu-devel@nongnu.org, anthony.perard@citrix.com,
pbonzini@redhat.com, sstabellini@kernel.org
Subject: Re: [Qemu-devel] [PATCH 2/3] move xen-hvm.c to hw/i386/xen/
Date: Thu, 6 Apr 2017 17:24:20 +0200 [thread overview]
Message-ID: <20170406152420.GB1618@redhat> (raw)
In-Reply-To: <1491434491-1765-3-git-send-email-anthony.xu@intel.com>
On Wed, Apr 05, 2017 at 04:21:30PM -0700, Anthony Xu wrote:
> move xen-hvm.c to hw/i386/xen/
>
>
> Signed-off -by: Anthony Xu <anthony.xu@intel.com>
>
>
>
> ---
> Makefile.target | 3 +--
> hw/i386/xen/Makefile.objs | 2 +-
> hw/i386/xen/trace-events | 11 +++++++++++
> xen-hvm.c => hw/i386/xen/xen-hvm.c | 2 +-
> stubs/Makefile.objs | 1 +
> xen-hvm-stub.c => stubs/xen-hvm.c | 0
> trace-events | 11 -----------
> 7 files changed, 15 insertions(+), 15 deletions(-)
> rename xen-hvm.c => hw/i386/xen/xen-hvm.c (99%)
> rename xen-hvm-stub.c => stubs/xen-hvm.c (100%)
Reviewed-By: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@redhat.com>
>
> diff --git a/Makefile.target b/Makefile.target
> index 48c027f..d5ff0c7 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -150,8 +150,7 @@ obj-y += migration/ram.o migration/savevm.o
> LIBS := $(libs_softmmu) $(LIBS)
>
> # xen support
> -obj-$(CONFIG_XEN_I386) += xen-hvm.o xen-mapcache.o
> -obj-$(call lnot,$(CONFIG_XEN_I386)) += xen-hvm-stub.o
> +obj-$(CONFIG_XEN_I386) += xen-mapcache.o
>
> # Hardware support
> ifeq ($(TARGET_NAME), sparc64)
> diff --git a/hw/i386/xen/Makefile.objs b/hw/i386/xen/Makefile.objs
> index 801a68d..daf4f53 100644
> --- a/hw/i386/xen/Makefile.objs
> +++ b/hw/i386/xen/Makefile.objs
> @@ -1 +1 @@
> -obj-y += xen_platform.o xen_apic.o xen_pvdevice.o
> +obj-y += xen_platform.o xen_apic.o xen_pvdevice.o xen-hvm.o
Refers to the file moved /xen-hvm.c to /hw/i386/xen/xen-hvm.c
> diff --git a/hw/i386/xen/trace-events b/hw/i386/xen/trace-events
> index 321fe60..f25d622 100644
> --- a/hw/i386/xen/trace-events
> +++ b/hw/i386/xen/trace-events
> @@ -4,3 +4,14 @@ xen_platform_log(char *s) "xen platform: %s"
> # hw/i386/xen/xen_pvdevice.c
> xen_pv_mmio_read(uint64_t addr) "WARNING: read from Xen PV Device MMIO space (address %"PRIx64")"
> xen_pv_mmio_write(uint64_t addr) "WARNING: write to Xen PV Device MMIO space (address %"PRIx64")"
> +
> +# xen-hvm.c
> +xen_ram_alloc(unsigned long ram_addr, unsigned long size) "requested: %#lx, size %#lx"
> +xen_client_set_memory(uint64_t start_addr, unsigned long size, bool log_dirty) "%#"PRIx64" size %#lx, log_dirty %i"
> +handle_ioreq(void *req, uint32_t type, uint32_t dir, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p type=%d dir=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
> +handle_ioreq_read(void *req, uint32_t type, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p read type=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
> +handle_ioreq_write(void *req, uint32_t type, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p write type=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
> +cpu_ioreq_pio(void *req, uint32_t dir, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p pio dir=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
> +cpu_ioreq_pio_read_reg(void *req, uint64_t data, uint64_t addr, uint32_t size) "I/O=%p pio read reg data=%#"PRIx64" port=%#"PRIx64" size=%d"
> +cpu_ioreq_pio_write_reg(void *req, uint64_t data, uint64_t addr, uint32_t size) "I/O=%p pio write reg data=%#"PRIx64" port=%#"PRIx64" size=%d"
> +cpu_ioreq_move(void *req, uint32_t dir, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p copy dir=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
comming from /trace-events
> diff --git a/xen-hvm.c b/hw/i386/xen/xen-hvm.c
> similarity index 99%
> rename from xen-hvm.c
> rename to hw/i386/xen/xen-hvm.c
> index 5043beb..0892361 100644
> --- a/xen-hvm.c
> +++ b/hw/i386/xen/xen-hvm.c
> @@ -22,7 +22,7 @@
> #include "qemu/error-report.h"
> #include "qemu/range.h"
> #include "sysemu/xen-mapcache.h"
> -#include "trace-root.h"
> +#include "trace.h"
> #include "exec/address-spaces.h"
>
> #include <xen/hvm/ioreq.h>
> diff --git a/stubs/Makefile.objs b/stubs/Makefile.objs
> index 6c80613..f5b47bf 100644
> --- a/stubs/Makefile.objs
> +++ b/stubs/Makefile.objs
> @@ -38,3 +38,4 @@ stub-obj-y += target-get-monitor-def.o
> stub-obj-y += pc_madt_cpu_entry.o
> stub-obj-y += vmgenid.o
> stub-obj-y += xen-common.o
> +stub-obj-y += xen-hvm.o
Refers to the file moved /xen-hvm-stub.c to /hw/i386/stubs/xen-hvm.c
> diff --git a/xen-hvm-stub.c b/stubs/xen-hvm.c
> similarity index 100%
> rename from xen-hvm-stub.c
> rename to stubs/xen-hvm.c
> diff --git a/trace-events b/trace-events
> index b07a09b..4e14487 100644
> --- a/trace-events
> +++ b/trace-events
> @@ -48,17 +48,6 @@ spice_vmc_register_interface(void *scd) "spice vmc registered interface %p"
> spice_vmc_unregister_interface(void *scd) "spice vmc unregistered interface %p"
> spice_vmc_event(int event) "spice vmc event %d"
>
> -# xen-hvm.c
> -xen_ram_alloc(unsigned long ram_addr, unsigned long size) "requested: %#lx, size %#lx"
> -xen_client_set_memory(uint64_t start_addr, unsigned long size, bool log_dirty) "%#"PRIx64" size %#lx, log_dirty %i"
> -handle_ioreq(void *req, uint32_t type, uint32_t dir, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p type=%d dir=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
> -handle_ioreq_read(void *req, uint32_t type, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p read type=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
> -handle_ioreq_write(void *req, uint32_t type, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p write type=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
> -cpu_ioreq_pio(void *req, uint32_t dir, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p pio dir=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
> -cpu_ioreq_pio_read_reg(void *req, uint64_t data, uint64_t addr, uint32_t size) "I/O=%p pio read reg data=%#"PRIx64" port=%#"PRIx64" size=%d"
> -cpu_ioreq_pio_write_reg(void *req, uint64_t data, uint64_t addr, uint32_t size) "I/O=%p pio write reg data=%#"PRIx64" port=%#"PRIx64" size=%d"
> -cpu_ioreq_move(void *req, uint32_t dir, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p copy dir=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
> -
> # xen-mapcache.c
> xen_map_cache(uint64_t phys_addr) "want %#"PRIx64
> xen_remap_bucket(uint64_t index) "index %#"PRIx64
> --
> 1.8.3.1
>
next prev parent reply other threads:[~2017-04-06 15:24 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-05 23:21 [Qemu-devel] [PATCH 0/3] move xen related files to corresponding xen directory Anthony Xu
2017-04-05 23:21 ` [Qemu-devel] [PATCH 1/3] move xen-common.c to hw/xen/ Anthony Xu
2017-04-06 15:10 ` Sahid Orentino Ferdjaoui
2017-04-06 15:21 ` Eric Blake
2017-04-05 23:21 ` [Qemu-devel] [PATCH 2/3] move xen-hvm.c to hw/i386/xen/ Anthony Xu
2017-04-06 15:24 ` Sahid Orentino Ferdjaoui [this message]
2017-04-05 23:21 ` [Qemu-devel] [PATCH 3/3] move xen-mapcache.c " Anthony Xu
2017-04-14 18:47 ` [Qemu-devel] [PATCH 0/3] move xen related files to corresponding xen directory Stefano Stabellini
-- strict thread matches above, loose matches on Subject: below --
2017-04-05 18:39 [Qemu-devel] [PATCH 2/3] move xen-hvm.c to hw/i386/xen/ Xu, Anthony
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170406152420.GB1618@redhat \
--to=sferdjao@redhat.com \
--cc=anthony.perard@citrix.com \
--cc=anthony.xu@intel.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=sstabellini@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.