[PATCH v5 1/4] power: bq24190_charger: Limit over/under voltage fault logging

[Liam Breck <liam@networkimprov.net>]

From: Liam Breck <kernel@networkimprov.net>

If the charger is unplugged before the battery is full we may
see an over/under voltage fault. Ignore this rather then emitting
a message or uevent.

This fixes messages like these getting logged on charger unplug + replug:
bq24190-charger 15-006b: Fault: boost 0, charge 1, battery 0, ntc 0
bq24190-charger 15-006b: Fault: boost 0, charge 0, battery 0, ntc 0

Cc: Tony Lindgren <tony@atomide.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/power/supply/bq24190_charger.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index a699ad3..64a48b9 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -1222,8 +1222,13 @@ static void bq24190_check_status(struct bq24190_dev_info *bdi)
 		}
 	} while (f_reg && ++i < 2);
 
+	/* ignore over/under voltage fault after disconnect */
+	if (f_reg == (1 << BQ24190_REG_F_CHRG_FAULT_SHIFT) &&
+	    !(ss_reg & BQ24190_REG_SS_PG_STAT_MASK))
+		f_reg = 0;
+
 	if (f_reg != bdi->f_reg) {
-		dev_info(bdi->dev,
+		dev_warn(bdi->dev,
 			"Fault: boost %d, charge %d, battery %d, ntc %d\n",
 			!!(f_reg & BQ24190_REG_F_BOOST_FAULT_MASK),
 			!!(f_reg & BQ24190_REG_F_CHRG_FAULT_MASK),
-- 
2.9.3