From: "Richard W.M. Jones" <rjones@redhat.com>
To: pbonzini@redhat.com
Cc: qemu-devel@nongnu.org
Subject: [Qemu-devel] virtio-scsi limits
Date: Tue, 18 Apr 2017 16:24:24 +0100 [thread overview]
Message-ID: <20170418152424.GX30620@redhat.com> (raw)
Hi Paolo,
I was looking for documentation on the limits of #controllers,
#channels, #targets, #LUNs, #disks in virtio-scsi, and couldn't find
any, so I thought I would create that documentation instead. I wonder
if you could check that the following is correct information. Also -
at the bottom of the email - a puzzling problem or bug.
At the libvirt level, we refer to virtio-scsi disks using:
<devices>
<controller type="scsi" index="0" model="virtio-scsi"/>
...
<disk device="disk" type="file">
<source file="disk.img"/>
<target dev="sda" bus="scsi"/>
<driver name="qemu" type="raw"/>
<address type="drive" controller="0" bus="0" target="0" unit="0"/>
</disk>
On the qemu command line, the controller becomes:
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x2
(For Q35, it would specify a PCIe bus and the address would also be a
bit different).
On the qemu command line, the disk becomes:
-drive file=disk.img,format=raw,if=none,id=drive-scsi0-0-0-0
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1
In libvirt <address ... controller="0"> refers back to the
<controller index="0"/> element. You can add more than one
virtio-scsi controller, but each one takes a PCI slot, and the number
of PCI slots can be limited (or on Q35, there are no effective limits
but there are other architectural constraints).
In libvirt, <address ... bus="0"> refers to the virtio-scsi "channel".
The current virtio-scsi driver in qemu has a hard limit of 1 channel,
so you can only use bus="0" (or channel=0).
Open question: Will this limit ever be increased?
In libvirt, <address ... target="0"> refers to the virtio-scsi
"scsi-id" (internally in the driver called just ".id"). You can use
any target from 0 to 255 inclusive.
In libvirt, <address ... unit="0"> refers to the virtio-scsi "unit" ie
the SCSI LUN. You can use any LUN from 0 to 16383 inclusive.
Open question: What does the bus=scsi0.0 parameter mean?
The maximum number of drives on a single controller is therefore
256 * 16384 = 4194304.
However there are other limits to consider:
(1) qemu is limited by the number of files it can open (ulimit -n /
RLIMIT_NOFILE). On Fedora, this is 1024 (soft) or 4096 (hard),
although of course it may be increased.
(2) libvirt has trouble with > about 8000 drives
(https://bugzilla.redhat.com/1443066).
(3) The Linux kernel used to be limited to three letter drive names
(ie. up to /dev/sdzzz, or 18278 drives), but in modern kernels
this is no longer an issue.
(4) The Linux kernel is quite slow at enumerating drives. I couldn't
get past 4000 drives without hitting SCSI layer timeouts.
Not tested yet: Does hotplugging work on individual LUNs?
----------------------------------------------------------------------
Currently libguestfs puts each disk on a separate target (target=i
unit=0), and therefore has an effective limit of 255 disks (256 - 1
because the appliance uses a disk).
When I changed libguestfs to use LUNs instead of targets (target=0
unit=i), I got a peculiar bug. It looks like there is some kind of
race when enumerating the device, where /sys is populated before the
device is actually available. See the below boot log, and compare it
to the init code:
https://github.com/libguestfs/supermin/blob/master/init/init.c#L176
* fp = fopen ("/sys/block/sdab/dev", "r") succeeds at line 181
* we read major:minor from fp at line 230
* we mknod ("/dev/root",...) at line 245
* we mount ("/dev/root", "/root", "ext2"...) at line 262, which fails with
EINVAL
* shortly after that, kernel messages indicate that sdab has been
attached.
Rich.
2017-04-18 14:30:28.019+0000: starting up libvirt version: 3.2.0, package: 1.fc27 (Fedora Project, 2017-04-03-13:37:30, buildvm-26.phx2.fedoraproject.org), qemu version: 2.8.93(qemu-2.9.0-0.2.rc3.fc27), hostname: trick.home.annexia.org
LC_ALL=C LD_LIBRARY_PATH=/home/rjones/d/libguestfs/ruby/ext/guestfs:/home/rjones/d/libguestfs/lib/.libs:/home/rjones/d/libguestfs/java/.libs:/home/rjones/d/libguestfs/gobject/.libs PATH=/home/rjones/d/libguestfs/v2v:/home/rjones/d/libguestfs/tools:/home/rjones/d/libguestfs/test-tool:/home/rjones/d/libguestfs/sysprep:/home/rjones/d/libguestfs/sparsify:/home/rjones/d/libguestfs/resize:/home/rjones/d/libguestfs/rescue:/home/rjones/d/libguestfs/p2v:/home/rjones/d/libguestfs/make-fs:/home/rjones/d/libguestfs/inspector:/home/rjones/d/libguestfs/get-kernel:/home/rjones/d/libguestfs/fuse:/home/rjones/d/libguestfs/format:/home/rjones/d/libguestfs/fish:/home/rjones/d/libguestfs/erlang:/home/rjones/d/libguestfs/edit:/home/rjones/d/libguestfs/diff:/home/rjones/d/libguestfs/dib:/home/rjones/d/libguestfs/df:/home/rjones/d/libguestfs/customize:/home/rjones/d/libguestfs/cat:/home/rjones/d/libguestfs/builder:/home/rjones/d/libguestfs/align:/usr/libexec/python2-sphinx:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/rjones/.local/bin:/home/rjones/bin HOME=/home/rjones USER=rjones LOGNAME=rjones QEMU_AUDIO_DRV=none TMPDIR=/home/rjones/d/libguestfs/tmp /usr/bin/qemu-kvm -name guest=guestfs-o53fc0or1muu2f30,debug-threads=on -S -object secret,id=masterKey0,format=raw,file=/home/rjones/.config/libvirt/qemu/lib/domain-1-guestfs-o53fc0or1muu/master-key.aes -machine pc-i440fx-2.9,accel=kvm,usb=off,dump-guest-core=off -cpu host -m 500 -realtime mlock=off -smp 1,sockets=1,cores=1,threads=1 -uuid ca87a437-9562-4ca0-bd11-607342286ba1 -display none -no-user-config -nodefaults -device sga -chardev socket,id=charmonitor,path=/home/rjones/.config/libvirt/qemu/lib/domain-1-guestfs-o53fc0or1muu/monitor.sock,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc,driftfix=slew -global kvm-pit.lost_tick_policy=delay -no-hpet -no-reboot -no-acpi -boot strict=on -kernel /home/rjones/d/libguestfs/tmp/.guestfs-1000/appliance.d/kernel -initrd /home/rjones/d/libguestfs/tmp/.guestfs-1000/appliance.d/initrd -append 'panic=1 console=ttyS0 edd=off udevtimeout=6000 udev.event-timeout=6000 no_timer_check printk.time=1 cgroup_disable=memory usbcore.nousb cryptomgr.notests tsc=reliable 8250.nr_uarts=1 root=/dev/sdab selinux=0 guestfs_verbose=1 TERM=xterm-256color' -device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x2 -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x3 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.1,format=raw,if=none,id=drive-scsi0-0-0-0,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.2,format=raw,if=none,id=drive-scsi0-0-0-1,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=1,drive=drive-scsi0-0-0-1,id=scsi0-0-0-1 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.3,format=raw,if=none,id=drive-scsi0-0-0-2,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=2,drive=drive-scsi0-0-0-2,id=scsi0-0-0-2 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.4,format=raw,if=none,id=drive-scsi0-0-0-3,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=3,drive=drive-scsi0-0-0-3,id=scsi0-0-0-3 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.5,format=raw,if=none,id=drive-scsi0-0-0-4,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=4,drive=drive-scsi0-0-0-4,id=scsi0-0-0-4 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.6,format=raw,if=none,id=drive-scsi0-0-0-5,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=5,drive=drive-scsi0-0-0-5,id=scsi0-0-0-5 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.7,format=raw,if=none,id=drive-scsi0-0-0-6,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=6,drive=drive-scsi0-0-0-6,id=scsi0-0-0-6 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.8,format=raw,if=none,id=drive-scsi0-0-0-7,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=7,drive=drive-scsi0-0-0-7,id=scsi0-0-0-7 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.9,format=raw,if=none,id=drive-scsi0-0-0-8,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=8,drive=drive-scsi0-0-0-8,id=scsi0-0-0-8 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.10,format=raw,if=none,id=drive-scsi0-0-0-9,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=9,drive=drive-scsi0-0-0-9,id=scsi0-0-0-9 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.11,format=raw,if=none,id=drive-scsi0-0-0-10,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=10,drive=drive-scsi0-0-0-10,id=scsi0-0-0-10 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.12,format=raw,if=none,id=drive-scsi0-0-0-11,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=11,drive=drive-scsi0-0-0-11,id=scsi0-0-0-11 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.13,format=raw,if=none,id=drive-scsi0-0-0-12,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=12,drive=drive-scsi0-0-0-12,id=scsi0-0-0-12 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.14,format=raw,if=none,id=drive-scsi0-0-0-13,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=13,drive=drive-scsi0-0-0-13,id=scsi0-0-0-13 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.15,format=raw,if=none,id=drive-scsi0-0-0-14,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=14,drive=drive-scsi0-0-0-14,id=scsi0-0-0-14 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.16,format=raw,if=none,id=drive-scsi0-0-0-15,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=15,drive=drive-scsi0-0-0-15,id=scsi0-0-0-15 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.17,format=raw,if=none,id=drive-scsi0-0-0-16,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=16,drive=drive-scsi0-0-0-16,id=scsi0-0-0-16 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.18,format=raw,if=none,id=drive-scsi0-0-0-17,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=17,drive=drive-scsi0-0-0-17,id=scsi0-0-0-17 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.19,format=raw,if=none,id=drive-scsi0-0-0-18,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=18,drive=drive-scsi0-0-0-18,id=scsi0-0-0-18 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.20,format=raw,if=none,id=drive-scsi0-0-0-19,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=19,drive=drive-scsi0-0-0-19,id=scsi0-0-0-19 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.21,format=raw,if=none,id=drive-scsi0-0-0-20,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=20,drive=drive-scsi0-0-0-20,id=scsi0-0-0-20 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.22,format=raw,if=none,id=drive-scsi0-0-0-21,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=21,drive=drive-scsi0-0-0-21,id=scsi0-0-0-21 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.23,format=raw,if=none,id=drive-scsi0-0-0-22,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=22,drive=drive-scsi0-0-0-22,id=scsi0-0-0-22 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.24,format=raw,if=none,id=drive-scsi0-0-0-23,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=23,drive=drive-scsi0-0-0-23,id=scsi0-0-0-23 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.25,format=raw,if=none,id=drive-scsi0-0-0-24,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=24,drive=drive-scsi0-0-0-24,id=scsi0-0-0-24 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.26,format=raw,if=none,id=drive-scsi0-0-0-25,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=25,drive=drive-scsi0-0-0-25,id=scsi0-0-0-25 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/scratch.27,format=raw,if=none,id=drive-scsi0-0-0-26,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=26,drive=drive-scsi0-0-0-26,id=scsi0-0-0-26 -drive file=/home/rjones/d/libguestfs/tmp/libguestfsRIVPfK/overlay28,format=qcow2,if=none,id=drive-scsi0-0-0-27,cache=unsafe -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=27,drive=drive-scsi0-0-0-27,id=scsi0-0-0-27 -chardev socket,id=charserial0,path=/run/user/1000/libguestfsE9o2dm/console.sock -device isa-serial,chardev=charserial0,id=serial0 -chardev socket,id=charchannel0,path=/run/user/1000/libguestfsE9o2dm/guestfsd.sock -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.libguestfs.channel.0 -object rng-random,id=objrng0,filename=/dev/urandom -device virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x4 -msg timestamp=on
2017-04-18 14:30:28.019+0000: Domain id=1 is tainted: custom-argv
2017-04-18 14:30:28.019+0000: Domain id=1 is tainted: host-cpu
2017-04-18 14:30:31.860+0000: shutting down, reason=shutdown
Google, Inc.
Serial Graphics Adapter 02/12/17
SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (mockbuild@) Sun Feb 12 00:43:05 UTC 2017
Term: 80x24
4 0
\x1b[2J\rSeaBIOS (version 1.10.2-1.fc26)
\rMachine UUID ca87a437-9562-4ca0-bd11-607342286ba1
\rBooting from ROM...
\x1b[2J[ 0.000000] Linux version 4.11.0-0.rc4.git1.1.fc27.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 7.0.1 20170327 (Red Hat 7.0.1-0.13) (GCC) ) #1 SMP Tue Mar 28 15:20:45 UTC 2017
[ 0.000000] Command line: panic=1 console=ttyS0 edd=off udevtimeout=6000 udev.event-timeout=6000 no_timer_check printk.time=1 cgroup_disable=memory usbcore.nousb cryptomgr.notests tsc=reliable 8250.nr_uarts=1 root=/dev/sdab selinux=0 guestfs_verbose=1 TERM=xterm-256color
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001f3fdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f3fe000-0x000000001f3fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: last_pfn = 0x1f3fe max_arch_pfn = 0x400000000
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000f6c10-0x000f6c1f] mapped at [ffffa059000f6c10]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] RAMDISK: [mem 0x1f366000-0x1f3effff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20170119/tbxfroot-244)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001f3fdfff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1f33b000-0x1f365fff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1f2bb001, primary cpu clock
[ 0.000000] kvm-clock: using sched offset of 371325493 cycles
[ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000001f3fdfff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001f3fdfff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001f3fdfff]
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: BOCHSCPU
[ 0.000000] MPTABLE: Product ID: 0.1
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] Processors: 1
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x1f400000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 485 pages/cpu @ffffa0591f000000 s1948504 r8192 d29864 u2097152
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1f00db40
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 125879
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: panic=1 console=ttyS0 edd=off udevtimeout=6000 udev.event-timeout=6000 no_timer_check printk.time=1 cgroup_disable=memory usbcore.nousb cryptomgr.notests tsc=reliable 8250.nr_uarts=1 root=/dev/sdab selinux=0 guestfs_verbose=1 TERM=xterm-256color
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Memory: 461856K/511600K available (9745K kernel code, 2014K rwdata, 3808K rodata, 4652K init, 17160K bss, 49744K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.001000] Running RCU self tests
[ 0.001000] Hierarchical RCU implementation.
[ 0.001000] \tRCU lockdep checking is enabled.
[ 0.001000] \tBuild-time adjustment of leaf fanout to 64.
[ 0.001000] \tRCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=1.
[ 0.001000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[ 0.001000] NR_IRQS:524544 nr_irqs:256 16
[ 0.001000] \tOffload RCU callbacks from all CPUs
[ 0.001000] \tOffload RCU callbacks from CPUs: 0.
[ 0.001000] Console: colour *CGA 80x25
[ 0.001000] console [ttyS0] enabled
[ 0.001000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.001000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.001000] ... MAX_LOCK_DEPTH: 48
[ 0.001000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.001000] ... CLASSHASH_SIZE: 4096
[ 0.001000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.001000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.001000] ... CHAINHASH_SIZE: 32768
[ 0.001000] memory used by lock dependency info: 8671 kB
[ 0.001000] per task-struct memory footprint: 2688 bytes
[ 0.001000] kmemleak: Kernel memory leak detector disabled
[ 0.001018] tsc: Detected 1699.998 MHz processor
[ 0.003027] Calibrating delay loop (skipped) preset value.. 3399.99 BogoMIPS (lpj=1699998)
[ 0.004011] pid_max: default: 32768 minimum: 301
[ 0.006165] Security Framework initialized
[ 0.008011] Yama: becoming mindful.
[ 0.009025] SELinux: Disabled at boot.
[ 0.011214] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.013193] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.015082] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.016015] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.019517] Disabling memory control group subsystem
[ 0.021128] CPU: Physical Processor ID: 0
[ 0.023017] mce: CPU supports 10 MCE banks
[ 0.025120] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.026010] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.040016] Freeing SMP alternatives memory: 32K
[ 0.042863] ftrace: allocating 32197 entries in 126 pages
[ 0.055311] smpboot: Max logical packages: 1
[ 0.057531] x2apic enabled
[ 0.058011] Switched APIC routing to physical x2apic.
[ 0.062806] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063000] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2609 v4 @ 1.70GHz (family: 0x6, model: 0x4f, stepping: 0x1)
[ 0.063254] Performance Events: Broadwell events, Intel PMU driver.
[ 0.064021] ... version: 2
[ 0.065010] ... bit width: 48
[ 0.066009] ... generic registers: 8
[ 0.067021] ... value mask: 0000ffffffffffff
[ 0.068010] ... max period: 000000007fffffff
[ 0.069010] ... fixed-purpose events: 3
[ 0.070010] ... event mask: 00000007000000ff
[ 0.072669] smp: Bringing up secondary CPUs ...
[ 0.073038] smp: Brought up 1 node, 1 CPU
[ 0.074011] smpboot: Total of 1 processors activated (3399.99 BogoMIPS)
[ 0.075808] sched_clock: Marking stable (75000000, 0)->(396801627, -321801627)
[ 0.079129] devtmpfs: initialized
[ 0.080701] x86/mm: Memory block size: 128MB
[ 0.085293] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.089064] futex hash table entries: 256 (order: 3, 32768 bytes)
[ 0.091677] pinctrl core: initialized pinctrl subsystem
[ 0.094067] RTC time: 14:30:28, date: 04/18/17
[ 0.096314] NET: Registered protocol family 16
[ 0.098807] cpuidle: using governor menu
[ 0.100932] PCI: Using configuration type 1 for base access
[ 0.110790] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.113333] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.116674] ACPI: Interpreter disabled.
[ 0.118503] vgaarb: loaded
[ 0.119907] SCSI subsystem initialized
[ 0.121620] usbcore: USB support disabled
[ 0.124193] PCI: Probing PCI hardware
[ 0.125796] PCI host bridge to bus 0000:00
[ 0.127419] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.129884] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
[ 0.132671] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.145046] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.147908] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.151764] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.154494] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.206482] pci 0000:00:01.0: PIIX/ICH IRQ router [8086:7000]
[ 0.211141] NetLabel: Initializing
[ 0.212580] NetLabel: domain hash size = 128
[ 0.214330] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.216836] NetLabel: unlabeled traffic allowed by default
[ 0.219328] clocksource: Switched to clocksource kvm-clock
[ 0.288806] VFS: Disk quotas dquot_6.6.0
[ 0.290516] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.293531] pnp: PnP ACPI: disabled
[ 0.301297] NET: Registered protocol family 2
[ 0.303701] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.306910] TCP bind hash table entries: 4096 (order: 6, 327680 bytes)
[ 0.309906] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.312599] UDP hash table entries: 256 (order: 3, 49152 bytes)
[ 0.315142] UDP-Lite hash table entries: 256 (order: 3, 49152 bytes)
[ 0.318143] NET: Registered protocol family 1
[ 0.319891] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.322254] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.324597] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.327530] Unpacking initramfs...
[ 0.332133] Freeing initrd memory: 552K
[ 0.361347] DMA-API: preallocated 65536 debug entries
[ 0.365537] DMA-API: debugging enabled by kernel config
[ 0.367840] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.371369] Scanning for low memory corruption every 60 seconds
[ 0.374041] alg: self-tests disabled
[ 0.376207] audit: initializing netlink subsys (disabled)
[ 0.378523] cryptomgr_test (31) used greatest stack depth: 14640 bytes left
[ 0.382109] Initialise system trusted keyrings
[ 0.384258] workingset: timestamp_bits=36 max_order=17 bucket_order=0
[ 0.393146] zbud: loaded
[ 0.400637] NET: Registered protocol family 38
[ 0.402612] Key type asymmetric registered
[ 0.404396] Asymmetric key parser 'x509' registered
[ 0.406442] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.409491] io scheduler noop registered
[ 0.411402] io scheduler deadline registered
[ 0.413212] io scheduler cfq registered (default)
[ 0.415091] io scheduler mq-deadline registered
[ 0.419179] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.423584] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.456161] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.460297] Non-volatile memory driver v1.3
[ 0.462130] Linux agpgart interface v0.103
[ 0.467678] scsi host0: ata_piix
[ 0.469434] scsi host1: ata_piix
[ 0.470911] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
[ 0.473629] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
[ 0.476591] libphy: Fixed MDIO Bus: probed
[ 0.478471] usbserial: usb_serial_init - usb_register failed
[ 0.480806] usbserial: usb_serial_init - returning with error -19
[ 0.484518] i8042: PNP: No PS/2 controller found.
[ 0.486389] i8042: Probing ports directly.
[ 0.489922] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.491958] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.494442] mousedev: PS/2 mouse device common for all mice
[ 0.497646] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.501898] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.502142] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 0.502369] device-mapper: uevent: version 1.0.3
[ 0.507619] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 0.508012] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.508244] drop_monitor: Initializing network drop monitor service
[ 0.508480] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.508555] Initializing XFRM netlink socket
[ 0.509052] NET: Registered protocol family 10
[ 0.515512] kworker/u2:2 (84) used greatest stack depth: 13984 bytes left
[ 0.526228] Segment Routing with IPv6
[ 0.526280] mip6: Mobile IPv6
[ 0.526299] NET: Registered protocol family 17
[ 0.526758] AVX2 version of gcm_enc/dec engaged.
[ 0.526760] AES CTR mode by8 optimization enabled
[ 0.543050] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3
[ 0.547081] registered taskstats version 1
[ 0.547110] Loading compiled-in X.509 certificates
[ 0.552180] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input2
[ 0.556764] Loaded X.509 cert 'Fedora kernel signing key: 036bba79a715c1478c894d1c952934f04ad530a5'
[ 0.556932] zswap: loaded using pool lzo/zbud
[ 0.577721] Key type big_key registered
[ 0.579809] Key type encrypted registered
[ 0.583175] Magic number: 13:302:536
[ 0.584997] rtc_cmos rtc_cmos: setting system clock to 2017-04-18 14:30:29 UTC (1492525829)
[ 0.641961] Freeing unused kernel memory: 4652K
[ 0.643872] Write protecting the kernel read-only data: 14336k
[ 0.647151] Freeing unused kernel memory: 480K
[ 0.649973] Freeing unused kernel memory: 288K
[ 0.654106] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.656601] rodata_test: all tests were successful
supermin: mounting /proc
supermin: ext2 mini initrd starting up: 5.1.17 dietlibc
supermin: cmdline: panic=1 console=ttyS0 edd=off udevtimeout=6000 udev.event-timeout=6000 no_timer_check printk.time=1 cgroup_disable=memory usbcore.nousb cryptomgr.notests tsc=reliable 8250.nr_uarts=1 root=/dev/sdab selinux=0 guestfs_verbose=1 TERM=xterm-256color
supermin: uptime: 0.60 0.08
supermin: mounting /sys
supermin: internal insmod crc32-pclmul.ko
supermin: internal insmod crc32c-intel.ko
supermin: internal insmod crct10dif-pclmul.ko
supermin: internal insmod crc32_generic.ko
supermin: internal insmod nfit.ko
insmod: init_module: nfit.ko: No such device
supermin: internal insmod virtio.ko
supermin: internal insmod virtio_ring.ko
supermin: internal insmod virtio_blk.ko
supermin: internal insmod virtio-rng.ko
supermin: internal insmod virtio_console.ko
supermin: internal insmod crypto_engine.ko
supermin: internal insmod virtio_crypto.ko[ 0.716226] random: fast init done
supermin: internal insmod virtio_net.ko
supermin: internal insmod nd_btt.ko
supermin: internal insmod nd_pmem.ko
supermin: internal insmod virtio_scsi.ko
supermin: internal insmod virtio_balloon.ko
supermin: internal insmod virtio_input.ko
supermin: internal insmod virtio_mmio.ko
supermin: internal insmod virtio_pci.ko
[ 0.750232] virtio-pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 10
[ 0.757888] scsi host2: Virtio SCSI HBA
[ 0.760908] virtio-pci 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 11
[ 0.765966] scsi 2:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.777079] scsi 2:0:0:27: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.797056] scsi 2:0:0:26: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.801051] virtio-pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 11
[ 0.808212] scsi 2:0:0:25: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.811926] random: crng init done
[ 0.814597] scsi 2:0:0:24: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.819568] scsi 2:0:0:23: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.823898] scsi 2:0:0:22: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.828180] scsi 2:0:0:21: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.832427] scsi 2:0:0:20: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.836679] scsi 2:0:0:19: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.840946] scsi 2:0:0:18: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.845154] scsi 2:0:0:17: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.849404] scsi 2:0:0:16: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.853644] scsi 2:0:0:15: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.857927] scsi 2:0:0:14: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.862196] scsi 2:0:0:13: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.866432] scsi 2:0:0:12: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.870682] scsi 2:0:0:11: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.874952] scsi 2:0:0:10: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.879142] scsi 2:0:0:9: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.883343] scsi 2:0:0:8: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.887531] scsi 2:0:0:7: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.891778] scsi 2:0:0:6: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.895953] scsi 2:0:0:5: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.900142] scsi 2:0:0:4: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.904411] scsi 2:0:0:3: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.908635] scsi 2:0:0:2: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 0.912806] scsi 2:0:0:1: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 1.124757] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.127512] sd 2:0:0:0: [sda] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.130779] sd 2:0:0:0: [sda] Write Protect is off
[ 1.133100] sd 2:0:0:27: Attached scsi generic sg1 type 0
[ 1.135704] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.139705] sd 2:0:0:27: [sdb] 8388608 512-byte logical blocks: (4.29 GB/4.00 GiB)
[ 1.142948] sd 2:0:0:27: [sdb] Write Protect is off
[ 1.144929] sd 2:0:0:26: Attached scsi generic sg2 type 0
[ 1.147482] sd 2:0:0:27: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.151944] sd 2:0:0:26: [sdc] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.155113] sd 2:0:0:26: [sdc] Write Protect is off
[ 1.157290] sd 2:0:0:25: Attached scsi generic sg3 type 0
[ 1.160070] sd 2:0:0:26: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.164503] sd 2:0:0:25: [sdd] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.167645] sd 2:0:0:25: [sdd] Write Protect is off
[ 1.169807] sd 2:0:0:24: Attached scsi generic sg4 type 0
[ 1.173149] sd 2:0:0:25: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.177990] sd 2:0:0:24: [sde] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.181191] sd 2:0:0:24: [sde] Write Protect is off
[ 1.184067] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.186874] sd 2:0:0:23: Attached scsi generic sg5 type 0
[ 1.189651] sd 2:0:0:24: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.193690] sd 2:0:0:23: [sdf] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.196837] sd 2:0:0:23: [sdf] Write Protect is off
[ 1.199386] sd 2:0:0:27: [sdb] Attached SCSI disk
[ 1.202784] sd 2:0:0:22: [sdg] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.205824] sd 2:0:0:22: Attached scsi generic sg6 type 0
[ 1.208463] sd 2:0:0:22: [sdg] Write Protect is off
[ 1.210808] sd 2:0:0:23: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.214644] sd 2:0:0:26: [sdc] Attached SCSI disk
[ 1.218080] sd 2:0:0:22: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.221902] sd 2:0:0:21: Attached scsi generic sg7 type 0
[ 1.224778] sd 2:0:0:21: [sdh] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.228138] sd 2:0:0:21: [sdh] Write Protect is off
[ 1.230348] sd 2:0:0:25: [sdd] Attached SCSI disk
[ 1.233903] sd 2:0:0:20: Attached scsi generic sg8 type 0
[ 1.236246] sd 2:0:0:20: [sdi] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.239513] sd 2:0:0:20: [sdi] Write Protect is off
[ 1.241794] sd 2:0:0:24: [sde] Attached SCSI disk
[ 1.244088] sd 2:0:0:21: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.249007] sd 2:0:0:20: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.253181] sd 2:0:0:19: Attached scsi generic sg9 type 0
[ 1.255730] sd 2:0:0:19: [sdj] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.259110] sd 2:0:0:19: [sdj] Write Protect is off
[ 1.261235] sd 2:0:0:23: [sdf] Attached SCSI disk
[ 1.265214] sd 2:0:0:22: [sdg] Attached SCSI disk
[ 1.267227] sd 2:0:0:18: Attached scsi generic sg10 type 0
[ 1.269935] sd 2:0:0:18: [sdk] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.273341] sd 2:0:0:19: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.277362] sd 2:0:0:18: [sdk] Write Protect is off
[ 1.280756] sd 2:0:0:17: Attached scsi generic sg11 type 0
[ 1.283513] sd 2:0:0:17: [sdl] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.286731] sd 2:0:0:18: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.290468] sd 2:0:0:21: [sdh] Attached SCSI disk
[ 1.292833] sd 2:0:0:17: [sdl] Write Protect is off
[ 1.296174] sd 2:0:0:20: [sdi] Attached SCSI disk
[ 1.298389] sd 2:0:0:16: Attached scsi generic sg12 type 0
[ 1.301208] sd 2:0:0:16: [sdm] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.304585] sd 2:0:0:17: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.308906] sd 2:0:0:16: [sdm] Write Protect is off
[ 1.311919] sd 2:0:0:19: [sdj] Attached SCSI disk
[ 1.313897] sd 2:0:0:15: Attached scsi generic sg13 type 0
[ 1.316698] sd 2:0:0:16: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.320370] sd 2:0:0:15: [sdn] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.324055] sd 2:0:0:15: [sdn] Write Protect is off
[ 1.327433] sd 2:0:0:14: Attached scsi generic sg14 type 0
[ 1.330038] sd 2:0:0:18: [sdk] Attached SCSI disk
[ 1.332066] sd 2:0:0:14: [sdo] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.335256] sd 2:0:0:15: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.339196] sd 2:0:0:14: [sdo] Write Protect is off
[ 1.342776] sd 2:0:0:13: Attached scsi generic sg15 type 0
[ 1.345573] sd 2:0:0:13: [sdp] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.348562] sd 2:0:0:17: [sdl] Attached SCSI disk
[ 1.350497] sd 2:0:0:14: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.355531] sd 2:0:0:13: [sdp] Write Protect is off
[ 1.358208] sd 2:0:0:12: Attached scsi generic sg16 type 0
[ 1.360815] sd 2:0:0:12: [sdq] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.364075] sd 2:0:0:13: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.367740] sd 2:0:0:16: [sdm] Attached SCSI disk
[ 1.369849] sd 2:0:0:12: [sdq] Write Protect is off
[ 1.373438] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x188125786ea, max_idle_ns: 440795276273 ns
[ 1.377623] sd 2:0:0:11: Attached scsi generic sg17 type 0
[ 1.377859] sd 2:0:0:11: [sdr] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.378005] sd 2:0:0:11: [sdr] Write Protect is off
[ 1.378256] sd 2:0:0:11: [sdr] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.378639] sd 2:0:0:15: [sdn] Attached SCSI disk
[ 1.380664] sd 2:0:0:10: Attached scsi generic sg18 type 0
[ 1.380967] sd 2:0:0:10: [sds] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.381119] sd 2:0:0:10: [sds] Write Protect is off
[ 1.381389] sd 2:0:0:10: [sds] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.384464] sd 2:0:0:14: [sdo] Attached SCSI disk
[ 1.385634] sd 2:0:0:12: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.385663] sd 2:0:0:9: Attached scsi generic sg19 type 0
[ 1.385741] sd 2:0:0:11: [sdr] Attached SCSI disk
[ 1.386069] sd 2:0:0:9: [sdt] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.386226] sd 2:0:0:9: [sdt] Write Protect is off
[ 1.386822] sd 2:0:0:9: [sdt] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.388375] sd 2:0:0:10: [sds] Attached SCSI disk
[ 1.389302] sd 2:0:0:8: Attached scsi generic sg20 type 0
[ 1.389413] sd 2:0:0:8: [sdu] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.389539] sd 2:0:0:8: [sdu] Write Protect is off
[ 1.389837] sd 2:0:0:8: [sdu] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.391885] sd 2:0:0:9: [sdt] Attached SCSI disk
[ 1.393465] sd 2:0:0:12: [sdq] Attached SCSI disk
[ 1.393497] sd 2:0:0:7: Attached scsi generic sg21 type 0
[ 1.397123] sd 2:0:0:7: [sdv] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.397365] sd 2:0:0:7: [sdv] Write Protect is off
[ 1.397609] sd 2:0:0:8: [sdu] Attached SCSI disk
[ 1.397631] sd 2:0:0:7: [sdv] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.399306] sd 2:0:0:6: Attached scsi generic sg22 type 0
[ 1.399555] sd 2:0:0:6: [sdw] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.399688] sd 2:0:0:6: [sdw] Write Protect is off
[ 1.399938] sd 2:0:0:6: [sdw] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.400566] sd 2:0:0:13: [sdp] Attached SCSI disk
supermin: internal insmod crc-itu-t.ko
[ 1.402077] sd 2:0:0:5: Attached scsi generic sg23 type 0
[ 1.403090] sd 2:0:0:7: [sdv] Attached SCSI disk
supermin: internal insmod crc7.ko
supermin: internal insmod crc8.ko
supermin: internal insmod libcrc32c.ko
supermin: picked /sys/block/sdab/dev as root device
supermin: creating /dev/root as block special 65:176
supermin: mounting new root on /root
[ 1.403116] sd 2:0:0:5: [sdx] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
mount: /root: Invalid argument
[ 1.403224] sd 2:0:0:5: [sdx] Write Protect is off
[ 1.403226] sd 2:0:0:5: [sdx] Mode Sense: 63 00 00 08
[ 1.403517] sd 2:0:0:5: [sdx] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.404406] sd 2:0:0:6: [sdw] Attached SCSI disk
[ 1.404703] sd 2:0:0:4: [sdy] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.404761] sd 2:0:0:4: Attached scsi generic sg24 type 0
[ 1.404831] sd 2:0:0:4: [sdy] Write Protect is off
[ 1.404833] sd 2:0:0:4: [sdy] Mode Sense: 63 00 00 08
[ 1.405097] sd 2:0:0:4: [sdy] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.406816] sd 2:0:0:3: [sdz] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.406859] sd 2:0:0:3: Attached scsi generic sg25 type 0
[ 1.406972] sd 2:0:0:3: [sdz] Write Protect is off
[ 1.406975] sd 2:0:0:3: [sdz] Mode Sense: 63 00 00 08
[ 1.407209] sd 2:0:0:3: [sdz] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.412134] sd 2:0:0:4: [sdy] Attached SCSI disk
[ 1.412173] sd 2:0:0:5: [sdx] Attached SCSI disk
[ 1.412669] sd 2:0:0:2: Attached scsi generic sg26 type 0
[ 1.412796] sd 2:0:0:2: [sdaa] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.412941] sd 2:0:0:2: [sdaa] Write Protect is off
[ 1.412943] sd 2:0:0:2: [sdaa] Mode Sense: 63 00 00 08
[ 1.413207] sd 2:0:0:2: [sdaa] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.414442] sd 2:0:0:1: Attached scsi generic sg27 type 0
[ 1.414495] sd 2:0:0:3: [sdz] Attached SCSI disk
[ 1.418581] sd 2:0:0:1: [sdab] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
[ 1.420628] sd 2:0:0:1: [sdab] Write Protect is off
[ 1.420630] sd 2:0:0:1: [sdab] Mode Sense: 63 00 00 08
[ 1.425977] sd 2:0:0:1: [sdab] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.460647] sd 2:0:0:2: [sdaa] Attached SCSI disk
[ 1.508275] sd 2:0:0:1: [sdab] Attached SCSI disk
[ 1.538175] EXT4-fs (sdab): VFS: Can't find ext4 filesystem
[ 1.540218] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
[ 1.540218]
[ 1.540222] CPU: 0 PID: 1 Comm: init Not tainted 4.11.0-0.rc4.git1.1.fc27.x86_64 #1
[ 1.540224] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014
[ 1.540225] Call Trace:
[ 1.540234] dump_stack+0x8e/0xd1
[ 1.540243] panic+0xe9/0x237
[ 1.540282] do_exit+0xd3f/0xd70
[ 1.540289] ? trace_hardirqs_on_caller+0xf4/0x1b0
[ 1.540301] SyS_exit+0x17/0x20
[ 1.540307] entry_SYSCALL_64_fastpath+0x1f/0xc2
[ 1.540311] RIP: 0033:0x400e03
[ 1.540313] RSP: 002b:00007ffc58c7b998 EFLAGS: 00000246 ORIG_RAX: 000000000000003c
[ 1.540316] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000400e03
[ 1.540320] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000001
[ 1.540322] RBP: 0000000000000000 R08: 0000000000403bc4 R09: 00007ffc58c7b863
[ 1.540323] R10: 0000000000400e03 R11: 0000000000000246 R12: 0000000000000000
[ 1.540325] R13: 0000000000000041 R14: 0000000000000003 R15: 00007f6668448010
[ 1.540724] Kernel Offset: 0x13000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 1.652370] Rebooting in 1 seconds..
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
libguestfs lets you edit virtual machines. Supports shell scripting,
bindings from many languages. http://libguestfs.org
next reply other threads:[~2017-04-18 15:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-18 15:24 Richard W.M. Jones [this message]
2017-04-18 15:30 ` [Qemu-devel] virtio-scsi limits Paolo Bonzini
2017-04-18 17:17 ` Richard W.M. Jones
2017-04-18 20:28 ` Richard W.M. Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170418152424.GX30620@redhat.com \
--to=rjones@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.