From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [U-Boot PATCH V2 8/9] rockchip: config: enable rockusb support on rk3288 based board
Date: Thu, 20 Apr 2017 00:29:29 +0200 [thread overview]
Message-ID: <20170420002929.2bbdf8d1@jawa> (raw)
In-Reply-To: <20170416155414.14746-9-eddie.cai.linux@gmail.com>
Hi Eddie,
> all rk3288 based boards support rockusb, so enable it
>
> Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
> ---
> configs/evb-rk3288_defconfig | 2 ++
> configs/fennec-rk3288_defconfig | 1 +
> configs/firefly-rk3288_defconfig | 1 +
> configs/miqi-rk3288_defconfig | 1 +
> configs/popmetal-rk3288_defconfig | 1 +
> configs/rock2_defconfig | 2 ++
> configs/sandbox_defconfig | 1 +
> configs/tinker-rk3288_defconfig | 1 +
> 8 files changed, 10 insertions(+)
>
> diff --git a/configs/evb-rk3288_defconfig
> b/configs/evb-rk3288_defconfig index aad2533..6be46fb 100644
> --- a/configs/evb-rk3288_defconfig
> +++ b/configs/evb-rk3288_defconfig
> @@ -17,6 +17,8 @@ CONFIG_CMD_MMC=y
> CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_I2C=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_CACHE=y
> diff --git a/configs/fennec-rk3288_defconfig
> b/configs/fennec-rk3288_defconfig index d1b0ffc..ba8a356 100644
> --- a/configs/fennec-rk3288_defconfig
> +++ b/configs/fennec-rk3288_defconfig
> @@ -18,6 +18,7 @@ CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_CACHE=y
> diff --git a/configs/firefly-rk3288_defconfig
> b/configs/firefly-rk3288_defconfig index b0741d7..c860c06 100644
> --- a/configs/firefly-rk3288_defconfig
> +++ b/configs/firefly-rk3288_defconfig
> @@ -17,6 +17,7 @@ CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_CACHE=y
> diff --git a/configs/miqi-rk3288_defconfig
> b/configs/miqi-rk3288_defconfig index 203824b..3c42d99 100644
> --- a/configs/miqi-rk3288_defconfig
> +++ b/configs/miqi-rk3288_defconfig
> @@ -17,6 +17,7 @@ CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_CACHE=y
> diff --git a/configs/popmetal-rk3288_defconfig
> b/configs/popmetal-rk3288_defconfig index dfc84b9..ddf6062 100644
> --- a/configs/popmetal-rk3288_defconfig
> +++ b/configs/popmetal-rk3288_defconfig
> @@ -18,6 +18,7 @@ CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_CACHE=y
> diff --git a/configs/rock2_defconfig b/configs/rock2_defconfig
> index e9a32a9..365bc90 100644
> --- a/configs/rock2_defconfig
> +++ b/configs/rock2_defconfig
> @@ -16,6 +16,8 @@ CONFIG_CMD_MMC=y
> CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_I2C=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_CACHE=y
> diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
> index 7f3f5ac..9350d51 100644
> --- a/configs/sandbox_defconfig
> +++ b/configs/sandbox_defconfig
> @@ -33,6 +33,7 @@ CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_REMOTEPROC=y
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_TFTPPUT=y
> diff --git a/configs/tinker-rk3288_defconfig
> b/configs/tinker-rk3288_defconfig index cec3938..d96d7d3 100644
> --- a/configs/tinker-rk3288_defconfig
> +++ b/configs/tinker-rk3288_defconfig
> @@ -18,6 +18,7 @@ CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_GPIO=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_CACHE=y
This patch would need to be adjusted if mentioned earlier changes are
applied.
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
next prev parent reply other threads:[~2017-04-19 22:29 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-16 15:54 [U-Boot] [U-Boot PATCH V2 0/9] introduce Rockchip rockusb Eddie Cai
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 1/9] usb: ums: split macro and data struct in storage_common.c Eddie Cai
2017-04-19 15:19 ` Lukasz Majewski
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 2/9] usb: ums: split macro and data struct in f_mass_storage.c Eddie Cai
2017-04-19 15:20 ` Lukasz Majewski
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 3/9] usb: ums: merge storage_common.c into f_mass_storage.c Eddie Cai
2017-04-19 15:21 ` Lukasz Majewski
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 4/9] usb: ums: remove static declaration of some ums functions Eddie Cai
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 5/9] usb: ums: add functions to set and get usb interface descriptor Eddie Cai
2017-04-19 15:29 ` Lukasz Majewski
2017-04-20 0:55 ` Eddie Cai
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 6/9] usb: ums: add do_extra_command Eddie Cai
2017-04-19 22:14 ` Lukasz Majewski
2017-04-20 1:03 ` Eddie Cai
2017-04-20 8:55 ` Lukasz Majewski
2017-04-20 9:14 ` Lukasz Majewski
2017-04-20 9:16 ` Eddie Cai
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 7/9] cmd: add rockusb command Eddie Cai
2017-04-19 22:27 ` Lukasz Majewski
2017-04-20 1:15 ` Eddie Cai
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 8/9] rockchip: config: enable rockusb support on rk3288 based board Eddie Cai
2017-04-19 22:29 ` Lukasz Majewski [this message]
2017-04-16 15:54 ` [U-Boot] [U-Boot PATCH V2 9/9] rockusb: add a simple readme Eddie Cai
2017-04-19 22:39 ` Lukasz Majewski
2017-04-20 1:43 ` Eddie Cai
2017-04-16 19:34 ` [U-Boot] [U-Boot PATCH V2 0/9] introduce Rockchip rockusb Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170420002929.2bbdf8d1@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.