All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Samuel Ortiz <sameo@linux.intel.com>,
	linux-wireless@vger.kernel.org,
	Christophe Ricard <christophe.ricard@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 2/2] NFC: st21nfca: Get rid of code duplication in ->probe()
Date: Mon, 24 Apr 2017 21:41:28 +0300	[thread overview]
Message-ID: <20170424184128.48061-2-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20170424184128.48061-1-andriy.shevchenko@linux.intel.com>

Since OF and ACPI case almost the same get rid of code duplication
by moving gpiod_get() calls directly to ->probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/nfc/st21nfca/i2c.c | 62 ++++++++--------------------------------------
 1 file changed, 10 insertions(+), 52 deletions(-)

diff --git a/drivers/nfc/st21nfca/i2c.c b/drivers/nfc/st21nfca/i2c.c
index a04f24334b54..525f72f49b73 100644
--- a/drivers/nfc/st21nfca/i2c.c
+++ b/drivers/nfc/st21nfca/i2c.c
@@ -61,8 +61,6 @@
 #define ST21NFCA_HCI_DRIVER_NAME "st21nfca_hci"
 #define ST21NFCA_HCI_I2C_DRIVER_NAME "st21nfca_hci_i2c"
 
-#define ST21NFCA_GPIO_NAME_EN "enable"
-
 struct st21nfca_i2c_phy {
 	struct i2c_client *i2c_dev;
 	struct nfc_hci_dev *hdev;
@@ -508,44 +506,10 @@ static const struct acpi_gpio_mapping acpi_st21nfca_gpios[] = {
 	{},
 };
 
-static int st21nfca_hci_i2c_acpi_request_resources(struct i2c_client *client)
-{
-	struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
-	struct device *dev = &client->dev;
-	int ret;
-
-	ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), acpi_st21nfca_gpios);
-	if (ret)
-		return ret;
-
-	/* Get EN GPIO from ACPI */
-	phy->gpiod_ena = devm_gpiod_get(dev, ST21NFCA_GPIO_NAME_EN, GPIOD_OUT_LOW);
-	if (IS_ERR(phy->gpiod_ena)) {
-		nfc_err(dev, "Unable to get ENABLE GPIO\n");
-		return PTR_ERR(phy->gpiod_ena);
-	}
-
-	return 0;
-}
-
-static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client)
-{
-	struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
-	struct device *dev = &client->dev;
-
-	/* Get GPIO from device tree */
-	phy->gpiod_ena = devm_gpiod_get(dev, ST21NFCA_GPIO_NAME_EN, GPIOD_OUT_HIGH);
-	if (IS_ERR(phy->gpiod_ena)) {
-		nfc_err(dev, "Failed to request enable pin\n");
-		return PTR_ERR(phy->gpiod_ena);
-	}
-
-	return 0;
-}
-
 static int st21nfca_hci_i2c_probe(struct i2c_client *client,
 				  const struct i2c_device_id *id)
 {
+	struct device *dev = &client->dev;
 	struct st21nfca_i2c_phy *phy;
 	int r;
 
@@ -572,21 +536,15 @@ static int st21nfca_hci_i2c_probe(struct i2c_client *client,
 	mutex_init(&phy->phy_lock);
 	i2c_set_clientdata(client, phy);
 
-	if (client->dev.of_node) {
-		r = st21nfca_hci_i2c_of_request_resources(client);
-		if (r) {
-			nfc_err(&client->dev, "No platform data\n");
-			return r;
-		}
-	} else if (ACPI_HANDLE(&client->dev)) {
-		r = st21nfca_hci_i2c_acpi_request_resources(client);
-		if (r) {
-			nfc_err(&client->dev, "Cannot get ACPI data\n");
-			return r;
-		}
-	} else {
-		nfc_err(&client->dev, "st21nfca platform resources not available\n");
-		return -ENODEV;
+	r = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), acpi_st21nfca_gpios);
+	if (r)
+		dev_dbg(dev, "Unable to add GPIO mapping table\n");
+
+	/* Get EN GPIO from resource provider */
+	phy->gpiod_ena = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(phy->gpiod_ena)) {
+		nfc_err(dev, "Unable to get ENABLE GPIO\n");
+		return PTR_ERR(phy->gpiod_ena);
 	}
 
 	phy->se_status.is_ese_present =
-- 
2.11.0

  reply	other threads:[~2017-04-24 18:41 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-24 18:41 [PATCH v1 1/2] NFC: st21nfca: Add GPIO ACPI mapping table Andy Shevchenko
2017-04-24 18:41 ` Andy Shevchenko [this message]
2017-05-22 18:33 ` Andy Shevchenko
2017-06-05 20:20   ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170424184128.48061-2-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=christophe.ricard@gmail.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.