From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/3] spl: dfu: reduce spl-dfu MLO size
Date: Thu, 27 Apr 2017 08:31:29 -0400 [thread overview]
Message-ID: <20170427123129.GP12511@bill-the-cat> (raw)
In-Reply-To: <6C6B28D4DC342643927BEAFCE8707BF6C0B6E052@DBDE04.ent.ti.com>
On Thu, Apr 27, 2017 at 07:22:29AM +0000, B, Ravi wrote:
> Hi Tom
>
> >> Since spl-dfu does not dfu-reset, there is no need of run_command_cli,
> >> hence compiling out cli.c and cli_hush.c to reduce the spl-dfu memory
> >> foot print.
> >>
> >> Signed-off-by: Ravi Babu <ravibabu@ti.com>
> [snip]
> >> diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile index
> >> 61f2b71..ef48f36 100644
> >> --- a/drivers/dfu/Makefile
> >> +++ b/drivers/dfu/Makefile
> >> @@ -6,8 +6,10 @@
> >> #
> >>
> >> obj-$(CONFIG_USB_FUNCTION_DFU) += dfu.o
> >> +ifndef CONFIG_SPL_BUILD
> >> obj-$(CONFIG_DFU_MMC) += dfu_mmc.o
> >> obj-$(CONFIG_DFU_NAND) += dfu_nand.o
> >> -obj-$(CONFIG_DFU_RAM) += dfu_ram.o
> >> obj-$(CONFIG_DFU_SF) += dfu_sf.o
> >> obj-$(CONFIG_DFU_TFTP) += dfu_tftp.o
> >> +endif
> >> +obj-$(CONFIG_DFU_RAM) += dfu_ram.o
>
> >We should discard at link time the unreachable parts here in SPL, no?
>
> Yes you are correct.
> But what is happening here is, the CONFIG_DFU_<MMC/NAND/SF/TFTP> selected through Kconfig/Menuconfig is applicable for both SPL and U-Boot.
> Hence CONFIG_DFU_MMC/NAND/SF gets compiled for SPL as well, which needs run_command(). Actually CONFIG_DFU_MMC/NAND/etc is not scoped for SPL-DFU.
> As we have aligned, not to increase the SPL size, user shall use SPL-DFU feature to boot to u-boot, then utilize the full featured DFU to flash MMC/NAND/SF.
>
> I get undefined reference to common function run_command(), "dfu_fill_entitiy_<mmc/nand/sf>" in driver/dfu/dfu.c.
> The dfu.c is common for both SPL-DFU and U-boot.
OK. I think we need to introduce SPL_DFU_xxx Kconfig options, and use
CONFIG_IS_ENABLED(DFU_xxx) so that we will get things enabled/disabled
(and discarded) as needed.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170427/615ba049/attachment.sig>
next prev parent reply other threads:[~2017-04-27 12:31 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-26 13:14 [U-Boot] [PATCH 0/3] spl: dfu: misc fixes and reduce MLO foot print Ravi Babu
2017-04-26 13:14 ` [U-Boot] [PATCH 1/3] spl: Kconfig: dfu: spl-dfu depends on SPL_RAM_SUPPORT Ravi Babu
2017-04-26 13:36 ` Tom Rini
2017-04-26 13:14 ` [U-Boot] [PATCH 2/3] common: dfu: ignore reset for spl-dfu Ravi Babu
2017-04-26 13:40 ` Tom Rini
2017-04-26 15:58 ` B, Ravi
2017-04-26 16:24 ` Tom Rini
2017-04-26 16:25 ` B, Ravi
2017-04-27 8:06 ` Lukasz Majewski
2017-04-27 8:37 ` B, Ravi
2017-04-27 8:37 ` B, Ravi
2017-04-26 13:14 ` [U-Boot] [PATCH 3/3] spl: dfu: reduce spl-dfu MLO size Ravi Babu
2017-04-26 13:35 ` Tom Rini
2017-04-27 7:22 ` B, Ravi
2017-04-27 12:31 ` Tom Rini [this message]
2017-04-27 17:25 ` B, Ravi
2017-05-03 8:36 ` B, Ravi
2017-05-03 12:42 ` Tom Rini
2017-05-03 12:45 ` B, Ravi
2017-05-03 20:53 ` Lukasz Majewski
2017-05-03 20:48 ` Lukasz Majewski
[not found] <1493212325-31879-1-git-send-email-ravibabu@ti.com>
[not found] ` <1493212325-31879-4-git-send-email-ravibabu@ti.com>
[not found] ` <20170427095808.4a87f63c@jawa>
2017-04-27 11:21 ` B, Ravi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170427123129.GP12511@bill-the-cat \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.