Re: Recover array after I panicked

[Andreas Klauer <Andreas.Klauer@metamorpher.de>]

On Fri, Apr 28, 2017 at 09:11:45AM +0200, Patrik Dahlström wrote:
> Is it missing a 'skip=<offset/1M>'  here?

In this example the offset is provided by the loop devices.

If you don't like loop devices you can use seek=X skip=X (same X)
but you should triple check the offset is correct, data at this 
offset should be identical on both arrays. (What my example 
checks using `cmp` which should return differ at byte xxxxxxxxx. 
Have a look at it with hexdump too so it's not just zeroes...)

Regards
Andreas Klauer