From: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
To: jejb@linux.vnet.ibm.com, martin.petersen@oracle.com,
linux-scsi@vger.kernel.org
Cc: David.Carroll@microsemi.com, Gana.Sridaran@microsemi.com,
Scott.Benesh@microsemi.com, Prasad.Munirathnam@microsemi.com,
RaghavaAditya.Renukunta@microsemi.com
Subject: [PATCH 15/19] aacraid: Make sure ioctl returns on controller reset
Date: Sun, 7 May 2017 04:27:00 -0700 [thread overview]
Message-ID: <20170507112704.21940-16-RaghavaAditya.Renukunta@microsemi.com> (raw)
In-Reply-To: <20170507112704.21940-1-RaghavaAditya.Renukunta@microsemi.com>
Made sure that ioctl commands return in case of a controller reset.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
---
drivers/scsi/aacraid/commsup.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index f26543a..a026790 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -804,10 +804,13 @@ int aac_hba_send(u8 command, struct fib *fibptr, fib_callback callback,
return -EFAULT;
/* Only set for first known interruptable command */
+ fibptr->flags |= FIB_CONTEXT_FLAG_WAIT;
+ fibptr->flags &= ~(FIB_CONTEXT_FLAG_WAIT);
if (down_interruptible(&fibptr->event_wait)) {
fibptr->done = 2;
up(&fibptr->event_wait);
}
+
spin_lock_irqsave(&fibptr->event_lock, flags);
if ((fibptr->done == 0) || (fibptr->done == 2)) {
fibptr->done = 2; /* Tell interrupt we aborted */
@@ -1514,6 +1517,7 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
int jafo = 0;
int bled;
u64 dmamask;
+ int num_of_fibs = 0;
/*
* Assumptions:
@@ -1547,10 +1551,20 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
/*
* Loop through the fibs, close the synchronous FIBS
*/
- for (retval = 1, index = 0; index < (aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); index++) {
+ retval = 1;
+ num_of_fibs = aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB;
+ for (index = 0; index < num_of_fibs; index++) {
+
struct fib *fib = &aac->fibs[index];
- if (!(fib->hw_fib_va->header.XferState & cpu_to_le32(NoResponseExpected | Async)) &&
- (fib->hw_fib_va->header.XferState & cpu_to_le32(ResponseExpected))) {
+ __le32 XferState = fib->hw_fib_va->header.XferState;
+ bool is_response_expected = false;
+
+ if (!(XferState & cpu_to_le32(NoResponseExpected | Async)) &&
+ (XferState & cpu_to_le32(ResponseExpected)))
+ is_response_expected = true;
+
+ if (is_response_expected
+ || fib->flags & FIB_CONTEXT_FLAG_WAIT) {
unsigned long flagv;
spin_lock_irqsave(&fib->event_lock, flagv);
up(&fib->event_wait);
--
2.7.4
next prev parent reply other threads:[~2017-05-07 21:40 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-07 11:26 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
2017-05-07 11:26 ` [PATCH 01/19] aacraid: Remove GFP_DMA for raw srb memory Raghava Aditya Renukunta
2017-05-07 11:26 ` [PATCH 02/19] aacraid: Fix DMAR issues with iommu=pt Raghava Aditya Renukunta
2017-05-07 11:26 ` [PATCH 03/19] aacraid: Added 32 and 64 queue depth for arc natives Raghava Aditya Renukunta
2017-05-07 11:26 ` [PATCH 04/19] aacraid: Set correct Queue Depth for HBA1000 RAW disks Raghava Aditya Renukunta
2017-05-07 11:26 ` [PATCH 05/19] aacraid: Remove reset support from check_health Raghava Aditya Renukunta
2017-05-07 11:26 ` [PATCH 06/19] aacraid: Change wait time for fib completion Raghava Aditya Renukunta
2017-05-07 11:26 ` [PATCH 07/19] aacraid: Log count info of scsi cmds before reset Raghava Aditya Renukunta
2017-05-07 11:26 ` [PATCH 08/19] aacraid: Print ctrl status before eh reset Raghava Aditya Renukunta
2017-05-07 11:26 ` [PATCH 09/19] aacraid: Using single reset mask for IOP reset Raghava Aditya Renukunta
2017-05-07 11:26 ` [PATCH 10/19] aacraid: Rework " Raghava Aditya Renukunta
2017-05-07 11:26 ` [PATCH 11/19] aacraid: Add periodic checks to see IOP reset status Raghava Aditya Renukunta
2017-05-07 11:26 ` [PATCH 12/19] aacraid: Rework SOFT reset code Raghava Aditya Renukunta
2017-05-07 11:26 ` [PATCH 13/19] aacraid: Rework aac_src_restart Raghava Aditya Renukunta
2017-05-07 11:26 ` [PATCH 14/19] aacraid: Use correct function to get ctrl health Raghava Aditya Renukunta
2017-05-07 11:27 ` Raghava Aditya Renukunta [this message]
2017-05-07 11:27 ` [PATCH 16/19] aacraid: Enable ctrl reset for both hba and arc Raghava Aditya Renukunta
2017-05-07 11:27 ` [PATCH 17/19] aacraid : Add reset debugging statements Raghava Aditya Renukunta
2017-05-07 11:27 ` [PATCH 18/19] aacraid: Remove reference to Series-9 Raghava Aditya Renukunta
2017-05-07 11:27 ` [PATCH 19/19] aacraid: Update driver version to 50834 Raghava Aditya Renukunta
-- strict thread matches above, loose matches on Subject: below --
2017-05-07 13:34 [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes Raghava Aditya Renukunta
2017-05-07 13:34 ` [PATCH 15/19] aacraid: Make sure ioctl returns on controller reset Raghava Aditya Renukunta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170507112704.21940-16-RaghavaAditya.Renukunta@microsemi.com \
--to=raghavaaditya.renukunta@microsemi.com \
--cc=David.Carroll@microsemi.com \
--cc=Gana.Sridaran@microsemi.com \
--cc=Prasad.Munirathnam@microsemi.com \
--cc=Scott.Benesh@microsemi.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.