All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: jani.nikula@intel.com, ander.conselvan.de.oliveira@intel.com,
	intel-gfx@lists.freedesktop.org, shashidhar.hiremath@intel.com
Subject: Re: [PATCH 2/2] drm/i915/glk: Enable cold boot for GLK DSI
Date: Tue, 9 May 2017 16:58:16 +0300	[thread overview]
Message-ID: <20170509135816.GY12629@intel.com> (raw)
In-Reply-To: <1494336565-19185-2-git-send-email-madhav.chauhan@intel.com>

On Tue, May 09, 2017 at 06:59:25PM +0530, Madhav Chauhan wrote:
> As per BSEPC, if device ready bit is '0' in enable IO sequence
> then its a cold boot/reset scenario eg: S3/S4 resume. In these
> conditions we need to program certain registers and prepare port
> from the middle of DSI enable sequence otherwise feature like S3/S4
> doesn't work.

Can't we just always follow the "cold boot" sequence? Less codepaths
means less bugs.

> 
> Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_dsi.c | 79 ++++++++++++++++++++++++----------------
>  1 file changed, 48 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index fc0ef49..6b68864 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -346,12 +346,17 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder,
>  	return true;
>  }
>  
> -static void glk_dsi_device_ready(struct intel_encoder *encoder)
> +static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
> +			      struct intel_crtc_state *pipe_config);
> +
> +static void glk_dsi_device_ready(struct intel_encoder *encoder,
> +				 struct intel_crtc_state *pipe_config)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>  	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
>  	enum port port;
>  	u32 tmp, val;
> +	bool cold_boot = false;
>  
>  	/* Set the MIPI mode
>  	 * If MIPI_Mode is off, then writing to LP_Wake bit is not reflecting.
> @@ -370,7 +375,10 @@ static void glk_dsi_device_ready(struct intel_encoder *encoder)
>  	/* Program LP Wake */
>  	for_each_dsi_port(port, intel_dsi->ports) {
>  		tmp = I915_READ(MIPI_CTRL(port));
> -		tmp |= GLK_LP_WAKE;
> +		if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY))
> +			tmp &= ~GLK_LP_WAKE;
> +		else
> +			tmp |= GLK_LP_WAKE;
>  		I915_WRITE(MIPI_CTRL(port), tmp);
>  	}
>  
> @@ -382,6 +390,15 @@ static void glk_dsi_device_ready(struct intel_encoder *encoder)
>  			DRM_ERROR("MIPIO port is powergated\n");
>  	}
>  
> +	/* Check if cold boot scenario */
> +	for_each_dsi_port(port, intel_dsi->ports) {
> +		cold_boot |= !(I915_READ(MIPI_DEVICE_READY(port)) &
> +							DEVICE_READY);
> +	}
> +
> +	if (cold_boot)
> +		intel_dsi_prepare(encoder, pipe_config);
> +
>  	/* Wait for MIPI PHY status bit to set */
>  	for_each_dsi_port(port, intel_dsi->ports) {
>  		if (intel_wait_for_register(dev_priv,
> @@ -402,34 +419,34 @@ static void glk_dsi_device_ready(struct intel_encoder *encoder)
>  			val |= DEVICE_READY;
>  			I915_WRITE(MIPI_DEVICE_READY(port), val);
>  			usleep_range(10, 15);
> -		}
> -
> -		/* Enter ULPS */
> -		val = I915_READ(MIPI_DEVICE_READY(port));
> -		val &= ~ULPS_STATE_MASK;
> -		val |= (ULPS_STATE_ENTER | DEVICE_READY);
> -		I915_WRITE(MIPI_DEVICE_READY(port), val);
> +		} else {
> +			/* Enter ULPS */
> +			val = I915_READ(MIPI_DEVICE_READY(port));
> +			val &= ~ULPS_STATE_MASK;
> +			val |= (ULPS_STATE_ENTER | DEVICE_READY);
> +			I915_WRITE(MIPI_DEVICE_READY(port), val);
>  
> -		/* Wait for ULPS active */
> -		if (intel_wait_for_register(dev_priv,
> +			/* Wait for ULPS active */
> +			if (intel_wait_for_register(dev_priv,
>  				MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE, 0, 20))
> -			DRM_ERROR("ULPS not active\n");
> +				DRM_ERROR("ULPS not active\n");
>  
> -		/* Exit ULPS */
> -		val = I915_READ(MIPI_DEVICE_READY(port));
> -		val &= ~ULPS_STATE_MASK;
> -		val |= (ULPS_STATE_EXIT | DEVICE_READY);
> -		I915_WRITE(MIPI_DEVICE_READY(port), val);
> +			/* Exit ULPS */
> +			val = I915_READ(MIPI_DEVICE_READY(port));
> +			val &= ~ULPS_STATE_MASK;
> +			val |= (ULPS_STATE_EXIT | DEVICE_READY);
> +			I915_WRITE(MIPI_DEVICE_READY(port), val);
>  
> -		/* Enter Normal Mode */
> -		val = I915_READ(MIPI_DEVICE_READY(port));
> -		val &= ~ULPS_STATE_MASK;
> -		val |= (ULPS_STATE_NORMAL_OPERATION | DEVICE_READY);
> -		I915_WRITE(MIPI_DEVICE_READY(port), val);
> +			/* Enter Normal Mode */
> +			val = I915_READ(MIPI_DEVICE_READY(port));
> +			val &= ~ULPS_STATE_MASK;
> +			val |= (ULPS_STATE_NORMAL_OPERATION | DEVICE_READY);
> +			I915_WRITE(MIPI_DEVICE_READY(port), val);
>  
> -		tmp = I915_READ(MIPI_CTRL(port));
> -		tmp &= ~GLK_LP_WAKE;
> -		I915_WRITE(MIPI_CTRL(port), tmp);
> +			tmp = I915_READ(MIPI_CTRL(port));
> +			tmp &= ~GLK_LP_WAKE;
> +			I915_WRITE(MIPI_CTRL(port), tmp);
> +		}
>  	}
>  
>  	/* Wait for Stop state */
> @@ -515,7 +532,8 @@ static void vlv_dsi_device_ready(struct intel_encoder *encoder)
>  	}
>  }
>  
> -static void intel_dsi_device_ready(struct intel_encoder *encoder)
> +static void intel_dsi_device_ready(struct intel_encoder *encoder,
> +				   struct intel_crtc_state *pipe_config)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>  
> @@ -524,7 +542,7 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder)
>  	else if (IS_BROXTON(dev_priv))
>  		bxt_dsi_device_ready(encoder);
>  	else if (IS_GEMINILAKE(dev_priv))
> -		glk_dsi_device_ready(encoder);
> +		glk_dsi_device_ready(encoder, pipe_config);
>  }
>  
>  static void glk_dsi_enter_low_power_mode(struct intel_encoder *encoder)
> @@ -710,8 +728,6 @@ static void intel_dsi_port_disable(struct intel_encoder *encoder)
>  	}
>  }
>  
> -static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
> -			      struct intel_crtc_state *pipe_config);
>  static void intel_dsi_unprepare(struct intel_encoder *encoder);
>  
>  static void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec)
> @@ -800,7 +816,8 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,
>  		I915_WRITE(DSPCLK_GATE_D, val);
>  	}
>  
> -	intel_dsi_prepare(encoder, pipe_config);
> +	if (!IS_GEMINILAKE(dev_priv))
> +		intel_dsi_prepare(encoder, pipe_config);
>  
>  	/* Power on, try both CRC pmic gpio and VBT */
>  	if (intel_dsi->gpio_panel)
> @@ -812,7 +829,7 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,
>  	intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DEASSERT_RESET);
>  
>  	/* Put device in ready state (LP-11) */
> -	intel_dsi_device_ready(encoder);
> +	intel_dsi_device_ready(encoder, pipe_config);
>  
>  	/* Send initialization commands in LP mode */
>  	intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_INIT_OTP);
> -- 
> 1.9.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2017-05-09 13:58 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-09 13:29 [PATCH 1/2] drm/i915/glk: Calculate high/low switch count for GLK Madhav Chauhan
2017-05-09 13:29 ` [PATCH 2/2] drm/i915/glk: Enable cold boot for GLK DSI Madhav Chauhan
2017-05-09 13:58   ` Ville Syrjälä [this message]
2017-05-15 15:49     ` Jani Nikula
2017-05-15 17:42       ` Chauhan, Madhav
2017-05-24 13:51         ` Jani Nikula
2017-05-24 18:00           ` Chauhan, Madhav
2017-05-30  7:03             ` Jani Nikula
2017-05-30  9:10               ` Chauhan, Madhav
2017-05-09 14:09 ` ✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915/glk: Calculate high/low switch count for GLK Patchwork
2017-05-15 15:48 ` [PATCH 1/2] " Jani Nikula
  -- strict thread matches above, loose matches on Subject: below --
2017-05-08 15:29 [PATCH 2/2] drm/i915/glk: Enable cold boot for GLK DSI Madhav Chauhan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170509135816.GY12629@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=ander.conselvan.de.oliveira@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=madhav.chauhan@intel.com \
    --cc=shashidhar.hiremath@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.