diff for duplicates of <20170511141237.503663606@linuxfoundation.org> diff --git a/a/1.txt b/N1/1.txt index b3e9265..6f74a4d 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -13,7 +13,7 @@ Fix by doing two reads in irq_handle_thread() and using the cached value elsewhere. If a safety timer fault later clears itself, we apparently don't get an interrupt (INT), however other interrupts would refresh the register cache. ->From the data sheet: "When a fault occurs, the charger device sends out INT +>>From the data sheet: "When a fault occurs, the charger device sends out INT and keeps the fault state in REG09 until the host reads the fault register. Before the host reads REG09 and all the faults are cleared, the charger device would not send any INT upon new faults. In order to read the diff --git a/a/content_digest b/N1/content_digest index 0985b2f..51e4d7d 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -26,7 +26,7 @@ "elsewhere. If a safety timer fault later clears itself, we apparently don't get\n" "an interrupt (INT), however other interrupts would refresh the register cache.\n" "\n" - ">From the data sheet: \"When a fault occurs, the charger device sends out INT\n" + ">>From the data sheet: \"When a fault occurs, the charger device sends out INT\n" " and keeps the fault state in REG09 until the host reads the fault register.\n" " Before the host reads REG09 and all the faults are cleared, the charger\n" " device would not send any INT upon new faults. In order to read the\n" @@ -223,4 +223,4 @@ " \tpm_runtime_get_sync(bdi->dev);\n" " \tbq24190_register_reset(bdi);" -2ccca04b79d33152556dc2c7e4ff11cedd206c06fcbfefc641dc375907e11f53 +89cdcd7fe1c8fc23243da316959049d4316757d16660cf54b8a40a1fbe403e48
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.