* [PATCH 4/5] tools/power x86_energy_perf_policy: support HWP.EPP
2017-05-12 2:00 ` [PATCH 1/5] x86: msr-index.h: define EPB mid-points Len Brown
2017-05-12 2:00 ` [PATCH 2/5] x86: msr-index.h: define HWP.EPP values Len Brown
2017-05-12 2:00 ` [PATCH 3/5] x86: msr-index.h: fix shifts to ULL results in HWP macros Len Brown
@ 2017-05-12 2:00 ` Len Brown
2017-05-12 2:00 ` [PATCH 5/5] intel_pstate: use updated msr-index.h HWP.EPP values Len Brown
3 siblings, 0 replies; 6+ messages in thread
From: Len Brown @ 2017-05-12 2:00 UTC (permalink / raw)
To: rjw, linux-pm; +Cc: linux-kernel, Len Brown
From: Len Brown <len.brown@intel.com>
x86_energy_perf_policy(8) was created as an example
of how the user, or upper-level OS, can manage
MSR_IA32_ENERGY_PERF_BIAS (EPB).
Hardware consults EPB when it makes internal decisions
balancing energy-saving vs performance.
For example, should HW quickly or slowly
transition into and out of power-saving idles states?
Should HW quickly or slowly ramp frequency up or down
in response to demand in the turbo-frequency range?
Depending on the processor, EPB may have package, core,
or CPU thread scope. As such, the only general policy
is to write the same value to EPB on every CPU in the system.
Recent platforms add support for Hardware Performance States (HWP).
HWP effectively extends hardware frequency control from
the opportunistic turbo-frequency range to control the entire
range of available processor frequencies.
Just as turbo-mode used EPB, HWP can use EPB to help decicde
how quickly to ramp frequency and voltage up and down
in response to changing demand. Indeed, BDX and BDX-DE,
the first processors to support HWP, use EPB for this purpose.
Starting in SKL, HWP no longer looks to EPB for influence.
Instead, it looks in a new MSR specifically for this purpose:
IA32_HWP_REQUEST.Energy_Performance_Preference (HWP.EPP).
HWP.EPP is like EPB, except that it is specific to HWP-mode
frequency selection. Also, HWP.EPP is defined to have
per CPU-thread scope.
Starting in SKX, IA32_HWP_REQUEST is augmented by
IA32_HWP_REQUEST_PKG -- which has the same function, but is
defined to have package-wide scope. A new bit in IA32_HWP_REQUEST
determines if it over-rides the IA32_HWP_REQUEST_PKG or not.
Note that HWP-mode can be enabled in several ways.
The "in-band" method is for HWP to be exposed in CPUID,
and for the Linux intel_pstate driver to recognized that,
and thus enable HWP. In this case, starting in Linux 4.10, intel_pstate
exports cpufreq sysfs attribute "energy_performance_preference"
which can be used to manage HWP.EPP. This interface can be
used to set HWP.EPP to these values:
0 performance
128 balance_performance (default)
192 balance_power
255 power
Here, x86_energy_performance_policy is updated to use
idential strings and values as intel_pstate.
But HWP-mode may also be enabled by firmware before the OS boots,
and the OS may not be aware of HWP. In this case, intel_pstate
is not available to provide sysfs attributes, and x86_energy_perf_policy
or a similar utility is invaluable for managing HWP.EPP, for
this utility works the same, no matter if cpufreq is enabled or not.
Signed-off-by: Len Brown <len.brown@intel.com>
---
tools/power/x86/x86_energy_perf_policy/Makefile | 37 +-
.../x86_energy_perf_policy.8 | 317 ++--
.../x86_energy_perf_policy.c | 1750 ++++++++++++++++----
3 files changed, 1666 insertions(+), 438 deletions(-)
rewrite tools/power/x86/x86_energy_perf_policy/Makefile (72%)
rewrite tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8 (80%)
rewrite tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c (78%)
diff --git a/tools/power/x86/x86_energy_perf_policy/Makefile b/tools/power/x86/x86_energy_perf_policy/Makefile
dissimilarity index 72%
index 971c9ffdcb50..a711eec0c895 100644
--- a/tools/power/x86/x86_energy_perf_policy/Makefile
+++ b/tools/power/x86/x86_energy_perf_policy/Makefile
@@ -1,10 +1,27 @@
-DESTDIR ?=
-
-x86_energy_perf_policy : x86_energy_perf_policy.c
-
-clean :
- rm -f x86_energy_perf_policy
-
-install :
- install x86_energy_perf_policy ${DESTDIR}/usr/bin/
- install x86_energy_perf_policy.8 ${DESTDIR}/usr/share/man/man8/
+CC = $(CROSS_COMPILE)gcc
+BUILD_OUTPUT := $(CURDIR)
+PREFIX := /usr
+DESTDIR :=
+
+ifeq ("$(origin O)", "command line")
+ BUILD_OUTPUT := $(O)
+endif
+
+x86_energy_perf_policy : x86_energy_perf_policy.c
+CFLAGS += -Wall
+CFLAGS += -DMSRHEADER='"../../../../arch/x86/include/asm/msr-index.h"'
+
+%: %.c
+ @mkdir -p $(BUILD_OUTPUT)
+ $(CC) $(CFLAGS) $< -o $(BUILD_OUTPUT)/$@
+
+.PHONY : clean
+clean :
+ @rm -f $(BUILD_OUTPUT)/x86_energy_perf_policy
+
+install : x86_energy_perf_policy
+ install -d $(DESTDIR)$(PREFIX)/bin
+ install $(BUILD_OUTPUT)/x86_energy_perf_policy $(DESTDIR)$(PREFIX)/bin/x86_energy_perf_policy
+ install -d $(DESTDIR)$(PREFIX)/share/man/man8
+ install x86_energy_perf_policy.8 $(DESTDIR)$(PREFIX)/share/man/man8
+
diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8 b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8
dissimilarity index 80%
index 8eaaad648cdb..17db1c3af4d0 100644
--- a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8
+++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8
@@ -1,104 +1,213 @@
-.\" This page Copyright (C) 2010 Len Brown <len.brown@intel.com>
-.\" Distributed under the GPL, Copyleft 1994.
-.TH X86_ENERGY_PERF_POLICY 8
-.SH NAME
-x86_energy_perf_policy \- read or write MSR_IA32_ENERGY_PERF_BIAS
-.SH SYNOPSIS
-.ft B
-.B x86_energy_perf_policy
-.RB [ "\-c cpu" ]
-.RB [ "\-v" ]
-.RB "\-r"
-.br
-.B x86_energy_perf_policy
-.RB [ "\-c cpu" ]
-.RB [ "\-v" ]
-.RB 'performance'
-.br
-.B x86_energy_perf_policy
-.RB [ "\-c cpu" ]
-.RB [ "\-v" ]
-.RB 'normal'
-.br
-.B x86_energy_perf_policy
-.RB [ "\-c cpu" ]
-.RB [ "\-v" ]
-.RB 'powersave'
-.br
-.B x86_energy_perf_policy
-.RB [ "\-c cpu" ]
-.RB [ "\-v" ]
-.RB n
-.br
-.SH DESCRIPTION
-\fBx86_energy_perf_policy\fP
-allows software to convey
-its policy for the relative importance of performance
-versus energy savings to the processor.
-
-The processor uses this information in model-specific ways
-when it must select trade-offs between performance and
-energy efficiency.
-
-This policy hint does not supersede Processor Performance states
-(P-states) or CPU Idle power states (C-states), but allows
-software to have influence where it would otherwise be unable
-to express a preference.
-
-For example, this setting may tell the hardware how
-aggressively or conservatively to control frequency
-in the "turbo range" above the explicitly OS-controlled
-P-state frequency range. It may also tell the hardware
-how aggressively is should enter the OS requested C-states.
-
-Support for this feature is indicated by CPUID.06H.ECX.bit3
-per the Intel Architectures Software Developer's Manual.
-
-.SS Options
-\fB-c\fP limits operation to a single CPU.
-The default is to operate on all CPUs.
-Note that MSR_IA32_ENERGY_PERF_BIAS is defined per
-logical processor, but that the initial implementations
-of the MSR were shared among all processors in each package.
-.PP
-\fB-v\fP increases verbosity. By default
-x86_energy_perf_policy is silent.
-.PP
-\fB-r\fP is for "read-only" mode - the unchanged state
-is read and displayed.
-.PP
-.I performance
-Set a policy where performance is paramount.
-The processor will be unwilling to sacrifice any performance
-for the sake of energy saving. This is the hardware default.
-.PP
-.I normal
-Set a policy with a normal balance between performance and energy efficiency.
-The processor will tolerate minor performance compromise
-for potentially significant energy savings.
-This reasonable default for most desktops and servers.
-.PP
-.I powersave
-Set a policy where the processor can accept
-a measurable performance hit to maximize energy efficiency.
-.PP
-.I n
-Set MSR_IA32_ENERGY_PERF_BIAS to the specified number.
-The range of valid numbers is 0-15, where 0 is maximum
-performance and 15 is maximum energy efficiency.
-
-.SH NOTES
-.B "x86_energy_perf_policy "
-runs only as root.
-.SH FILES
-.ta
-.nf
-/dev/cpu/*/msr
-.fi
-
-.SH "SEE ALSO"
-msr(4)
-.PP
-.SH AUTHORS
-.nf
-Written by Len Brown <len.brown@intel.com>
+.\" This page Copyright (C) 2010 - 2015 Len Brown <len.brown@intel.com>
+.\" Distributed under the GPL, Copyleft 1994.
+.TH X86_ENERGY_PERF_POLICY 8
+.SH NAME
+x86_energy_perf_policy \- Manage Energy vs. Performance Policy via x86 Model Specific Registers
+.SH SYNOPSIS
+.B x86_energy_perf_policy
+.RB "[ options ] [ scope ] [field \ value]"
+.br
+.RB "scope: \-\-cpu\ cpu-list | \-\-pkg\ pkg-list"
+.br
+.RB "cpu-list, pkg-list: # | #,# | #-# | all"
+.br
+.RB "field: \-\-all | \-\-epb | \-\-hwp-epp | \-\-hwp-min | \-\-hwp-max | \-\-hwp-desired"
+.br
+.RB "other: (\-\-force | \-\-hwp-enable | \-\-turbo-enable) value)"
+.br
+.RB "value: # | default | performance | balance-performance | balance-power | power"
+.SH DESCRIPTION
+\fBx86_energy_perf_policy\fP
+displays and updates energy-performance policy settings specific to
+Intel Architecture Processors. Settings are accessed via Model Specific Register (MSR)
+updates, no matter if the Linux cpufreq sub-system is enabled or not.
+
+Policy in MSR_IA32_ENERGY_PERF_BIAS (EPB)
+may affect a wide range of hardware decisions,
+such as how aggressively the hardware enters and exits CPU idle states (C-states)
+and Processor Performance States (P-states).
+This policy hint does not replace explicit OS C-state and P-state selection.
+Rather, it tells the hardware how aggressively to implement those selections.
+Further, it allows the OS to influence energy/performance trade-offs where there
+is no software interface, such as in the opportunistic "turbo-mode" P-state range.
+Note that MSR_IA32_ENERGY_PERF_BIAS is defined per CPU,
+but some implementations
+share a single MSR among all CPUs in each processor package.
+On those systems, a write to EPB on one processor will
+be visible, and will have an effect, on all CPUs
+in the same processor package.
+
+Hardware P-States (HWP) are effectively an expansion of hardware
+P-state control from the opportunistic turbo-mode P-state range
+to include the entire range of available P-states.
+On Broadwell Xeon, the initial HWP implementation, EBP influenced HWP.
+That influence was removed in subsequent generations,
+where it was moved to the
+Energy_Performance_Preference (EPP) field in
+a pair of dedicated MSRs -- MSR_IA32_HWP_REQUEST and MSR_IA32_HWP_REQUEST_PKG.
+
+EPP is the most commonly managed knob in HWP mode,
+but MSR_IA32_HWP_REQUEST also allows the user to specify
+minimum-frequency for Quality-of-Service,
+and maximum-frequency for power-capping.
+MSR_IA32_HWP_REQUEST is defined per-CPU.
+
+MSR_IA32_HWP_REQUEST_PKG has the same capability as MSR_IA32_HWP_REQUEST,
+but it can simultaneously set the default policy for all CPUs within a package.
+A bit in per-CPU MSR_IA32_HWP_REQUEST indicates whether it is
+over-ruled-by or exempt-from MSR_IA32_HWP_REQUEST_PKG.
+
+MSR_HWP_CAPABILITIES shows the default values for the fields
+in MSR_IA32_HWP_REQUEST. It is displayed when no values
+are being written.
+
+.SS SCOPE OPTIONS
+.PP
+\fB-c, --cpu\fP Operate on the MSR_IA32_HWP_REQUEST for each CPU in a CPU-list.
+The CPU-list may be comma-separated CPU numbers, with dash for range
+or the string "all". Eg. '--cpu 1,4,6-8' or '--cpu all'.
+When --cpu is used, \fB--hwp-use-pkg\fP is available, which specifies whether the per-cpu
+MSR_IA32_HWP_REQUEST should be over-ruled by MSR_IA32_HWP_REQUEST_PKG (1),
+or exempt from MSR_IA32_HWP_REQUEST_PKG (0).
+
+\fB-p, --pkg\fP Operate on the MSR_IA32_HWP_REQUEST_PKG for each package in the package-list.
+The list is a string of individual package numbers separated
+by commas, and or ranges of package numbers separated by a dash,
+or the string "all".
+For example '--pkg 1,3' or '--pkg all'
+
+.SS VALUE OPTIONS
+.PP
+.I normal | default
+Set a policy with a normal balance between performance and energy efficiency.
+The processor will tolerate minor performance compromise
+for potentially significant energy savings.
+This is a reasonable default for most desktops and servers.
+"default" is a synonym for "normal".
+.PP
+.I performance
+Set a policy for maximum performance,
+accepting no performance sacrifice for the benefit of energy efficiency.
+.PP
+.I balance-performance
+Set a policy with a high priority on performance,
+but allowing some performance loss to benefit energy efficiency.
+.PP
+.I balance-power
+Set a policy where the performance and power are balanced.
+This is the default.
+.PP
+.I power
+Set a policy where the processor can accept
+a measurable performance impact to maximize energy efficiency.
+
+.PP
+The following table shows the mapping from the value strings above to actual MSR values.
+This mapping is defined in the Linux-kernel header, msr-index.h.
+
+.nf
+VALUE STRING EPB EPP
+performance 0 0
+balance-performance 4 128
+normal, default 6 128
+balance-power 8 192
+power 15 255
+.fi
+.PP
+For MSR_IA32_HWP_REQUEST performance fields
+(--hwp-min, --hwp-max, --hwp-desired), the value option
+is in units of 100 MHz, Eg. 12 signifies 1200 MHz.
+
+.SS FIELD OPTIONS
+\fB-a, --all value-string\fP Sets all EPB and EPP and HWP limit fields to the value associated with
+the value-string. In addition, enables turbo-mode and HWP-mode, if they were previous disabled.
+Thus "--all normal" will set a system without cpufreq into a well known configuration.
+.PP
+\fB-B, --epb\fP set EPB per-core or per-package.
+See value strings in the table above.
+.PP
+\fB-d, --debug\fP debug increases verbosity. By default
+x86_energy_perf_policy is silent for updates,
+and verbose for read-only mode.
+.PP
+\fB-P, --hwp-epp\fP set HWP.EPP per-core or per-package.
+See value strings in the table above.
+.PP
+\fB-m, --hwp-min\fP request HWP to not go below the specified core/bus ratio.
+The "default" is the value found in IA32_HWP_CAPABILITIES.min.
+.PP
+\fB-M, --hwp-max\fP request HWP not exceed a the specified core/bus ratio.
+The "default" is the value found in IA32_HWP_CAPABILITIES.max.
+.PP
+\fB-D, --hwp-desired\fP request HWP 'desired' frequency.
+The "normal" setting is 0, which
+corresponds to 'full autonomous' HWP control.
+Non-zero performance values request a specific performance
+level on this processor, specified in multiples of 100 MHz.
+.PP
+\fB-w, --hwp-window\fP specify integer number of microsec
+in the sliding window that HWP uses to maintain average frequency.
+This parameter is meaningful only when the "desired" field above is non-zero.
+Default is 0, allowing the HW to choose.
+.SH OTHER OPTIONS
+.PP
+\fB-f, --force\fP writes the specified values without bounds checking.
+.PP
+\fB-U, --hwp-use-pkg\fP (0 | 1), when used in conjunction with --cpu,
+indicates whether the per-CPU MSR_IA32_HWP_REQUEST should be overruled (1)
+or exempt (0) from per-Package MSR_IA32_HWP_REQUEST_PKG settings.
+The default is exempt.
+.PP
+\fB-H, --hwp-enable\fP enable HardWare-P-state (HWP) mode. Once enabled, system RESET is required to disable HWP mode.
+.PP
+\fB-t, --turbo-enable\fP enable (1) or disable (0) turbo mode.
+.PP
+\fB-v, --version\fP print version and exit.
+.PP
+If no request to change policy is made,
+the default behavior is to read
+and display the current system state,
+including the default capabilities.
+.SH WARNING
+.PP
+This utility writes directly to Model Specific Registers.
+There is no locking or coordination should this utility
+be used to modify HWP limit fields at the same time that
+intel_pstate's sysfs attributes access the same MSRs.
+.PP
+Note that --hwp-desired and --hwp-window are considered experimental.
+Future versions of Linux reserve the right to access these
+fields internally -- potentially conflicting with user-space access.
+.SH EXAMPLE
+.nf
+# sudo x86_energy_perf_policy
+cpu0: EPB 6
+cpu0: HWP_REQ: min 6 max 35 des 0 epp 128 window 0x0 (0*10^0us) use_pkg 0
+cpu0: HWP_CAP: low 1 eff 8 guar 27 high 35
+cpu1: EPB 6
+cpu1: HWP_REQ: min 6 max 35 des 0 epp 128 window 0x0 (0*10^0us) use_pkg 0
+cpu1: HWP_CAP: low 1 eff 8 guar 27 high 35
+cpu2: EPB 6
+cpu2: HWP_REQ: min 6 max 35 des 0 epp 128 window 0x0 (0*10^0us) use_pkg 0
+cpu2: HWP_CAP: low 1 eff 8 guar 27 high 35
+cpu3: EPB 6
+cpu3: HWP_REQ: min 6 max 35 des 0 epp 128 window 0x0 (0*10^0us) use_pkg 0
+cpu3: HWP_CAP: low 1 eff 8 guar 27 high 35
+.fi
+.SH NOTES
+.B "x86_energy_perf_policy"
+runs only as root.
+.SH FILES
+.ta
+.nf
+/dev/cpu/*/msr
+.fi
+.SH "SEE ALSO"
+.nf
+msr(4)
+Intel(R) 64 and IA-32 Architectures Software Developer's Manual
+.fi
+.PP
+.SH AUTHORS
+.nf
+Len Brown
diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
dissimilarity index 78%
index 40b3e5482f8a..65bbe627a425 100644
--- a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
+++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
@@ -1,324 +1,1426 @@
-/*
- * x86_energy_perf_policy -- set the energy versus performance
- * policy preference bias on recent X86 processors.
- */
-/*
- * Copyright (c) 2010, Intel Corporation.
- * Len Brown <len.brown@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <stdio.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/resource.h>
-#include <fcntl.h>
-#include <signal.h>
-#include <sys/time.h>
-#include <stdlib.h>
-#include <string.h>
-
-unsigned int verbose; /* set with -v */
-unsigned int read_only; /* set with -r */
-char *progname;
-unsigned long long new_bias;
-int cpu = -1;
-
-/*
- * Usage:
- *
- * -c cpu: limit action to a single CPU (default is all CPUs)
- * -v: verbose output (can invoke more than once)
- * -r: read-only, don't change any settings
- *
- * performance
- * Performance is paramount.
- * Unwilling to sacrifice any performance
- * for the sake of energy saving. (hardware default)
- *
- * normal
- * Can tolerate minor performance compromise
- * for potentially significant energy savings.
- * (reasonable default for most desktops and servers)
- *
- * powersave
- * Can tolerate significant performance hit
- * to maximize energy savings.
- *
- * n
- * a numerical value to write to the underlying MSR.
- */
-void usage(void)
-{
- printf("%s: [-c cpu] [-v] "
- "(-r | 'performance' | 'normal' | 'powersave' | n)\n",
- progname);
- exit(1);
-}
-
-#define MSR_IA32_ENERGY_PERF_BIAS 0x000001b0
-
-#define BIAS_PERFORMANCE 0
-#define BIAS_BALANCE 6
-#define BIAS_POWERSAVE 15
-
-void cmdline(int argc, char **argv)
-{
- int opt;
-
- progname = argv[0];
-
- while ((opt = getopt(argc, argv, "+rvc:")) != -1) {
- switch (opt) {
- case 'c':
- cpu = atoi(optarg);
- break;
- case 'r':
- read_only = 1;
- break;
- case 'v':
- verbose++;
- break;
- default:
- usage();
- }
- }
- /* if -r, then should be no additional optind */
- if (read_only && (argc > optind))
- usage();
-
- /*
- * if no -r , then must be one additional optind
- */
- if (!read_only) {
-
- if (argc != optind + 1) {
- printf("must supply -r or policy param\n");
- usage();
- }
-
- if (!strcmp("performance", argv[optind])) {
- new_bias = BIAS_PERFORMANCE;
- } else if (!strcmp("normal", argv[optind])) {
- new_bias = BIAS_BALANCE;
- } else if (!strcmp("powersave", argv[optind])) {
- new_bias = BIAS_POWERSAVE;
- } else {
- char *endptr;
-
- new_bias = strtoull(argv[optind], &endptr, 0);
- if (endptr == argv[optind] ||
- new_bias > BIAS_POWERSAVE) {
- fprintf(stderr, "invalid value: %s\n",
- argv[optind]);
- usage();
- }
- }
- }
-}
-
-/*
- * validate_cpuid()
- * returns on success, quietly exits on failure (make verbose with -v)
- */
-void validate_cpuid(void)
-{
- unsigned int eax, ebx, ecx, edx, max_level;
- unsigned int fms, family, model, stepping;
-
- eax = ebx = ecx = edx = 0;
-
- asm("cpuid" : "=a" (max_level), "=b" (ebx), "=c" (ecx),
- "=d" (edx) : "a" (0));
-
- if (ebx != 0x756e6547 || edx != 0x49656e69 || ecx != 0x6c65746e) {
- if (verbose)
- fprintf(stderr, "%.4s%.4s%.4s != GenuineIntel",
- (char *)&ebx, (char *)&edx, (char *)&ecx);
- exit(1);
- }
-
- asm("cpuid" : "=a" (fms), "=c" (ecx), "=d" (edx) : "a" (1) : "ebx");
- family = (fms >> 8) & 0xf;
- model = (fms >> 4) & 0xf;
- stepping = fms & 0xf;
- if (family == 6 || family == 0xf)
- model += ((fms >> 16) & 0xf) << 4;
-
- if (verbose > 1)
- printf("CPUID %d levels family:model:stepping "
- "0x%x:%x:%x (%d:%d:%d)\n", max_level,
- family, model, stepping, family, model, stepping);
-
- if (!(edx & (1 << 5))) {
- if (verbose)
- printf("CPUID: no MSR\n");
- exit(1);
- }
-
- /*
- * Support for MSR_IA32_ENERGY_PERF_BIAS
- * is indicated by CPUID.06H.ECX.bit3
- */
- asm("cpuid" : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (6));
- if (verbose)
- printf("CPUID.06H.ECX: 0x%x\n", ecx);
- if (!(ecx & (1 << 3))) {
- if (verbose)
- printf("CPUID: No MSR_IA32_ENERGY_PERF_BIAS\n");
- exit(1);
- }
- return; /* success */
-}
-
-unsigned long long get_msr(int cpu, int offset)
-{
- unsigned long long msr;
- char msr_path[32];
- int retval;
- int fd;
-
- sprintf(msr_path, "/dev/cpu/%d/msr", cpu);
- fd = open(msr_path, O_RDONLY);
- if (fd < 0) {
- printf("Try \"# modprobe msr\"\n");
- perror(msr_path);
- exit(1);
- }
-
- retval = pread(fd, &msr, sizeof msr, offset);
-
- if (retval != sizeof msr) {
- printf("pread cpu%d 0x%x = %d\n", cpu, offset, retval);
- exit(-2);
- }
- close(fd);
- return msr;
-}
-
-unsigned long long put_msr(int cpu, unsigned long long new_msr, int offset)
-{
- unsigned long long old_msr;
- char msr_path[32];
- int retval;
- int fd;
-
- sprintf(msr_path, "/dev/cpu/%d/msr", cpu);
- fd = open(msr_path, O_RDWR);
- if (fd < 0) {
- perror(msr_path);
- exit(1);
- }
-
- retval = pread(fd, &old_msr, sizeof old_msr, offset);
- if (retval != sizeof old_msr) {
- perror("pwrite");
- printf("pread cpu%d 0x%x = %d\n", cpu, offset, retval);
- exit(-2);
- }
-
- retval = pwrite(fd, &new_msr, sizeof new_msr, offset);
- if (retval != sizeof new_msr) {
- perror("pwrite");
- printf("pwrite cpu%d 0x%x = %d\n", cpu, offset, retval);
- exit(-2);
- }
-
- close(fd);
-
- return old_msr;
-}
-
-void print_msr(int cpu)
-{
- printf("cpu%d: 0x%016llx\n",
- cpu, get_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS));
-}
-
-void update_msr(int cpu)
-{
- unsigned long long previous_msr;
-
- previous_msr = put_msr(cpu, new_bias, MSR_IA32_ENERGY_PERF_BIAS);
-
- if (verbose)
- printf("cpu%d msr0x%x 0x%016llx -> 0x%016llx\n",
- cpu, MSR_IA32_ENERGY_PERF_BIAS, previous_msr, new_bias);
-
- return;
-}
-
-char *proc_stat = "/proc/stat";
-/*
- * run func() on every cpu in /dev/cpu
- */
-void for_every_cpu(void (func)(int))
-{
- FILE *fp;
- int retval;
-
- fp = fopen(proc_stat, "r");
- if (fp == NULL) {
- perror(proc_stat);
- exit(1);
- }
-
- retval = fscanf(fp, "cpu %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n");
- if (retval != 0) {
- perror("/proc/stat format");
- exit(1);
- }
-
- while (1) {
- int cpu;
-
- retval = fscanf(fp,
- "cpu%u %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n",
- &cpu);
- if (retval != 1)
- break;
-
- func(cpu);
- }
- fclose(fp);
-}
-
-int main(int argc, char **argv)
-{
- cmdline(argc, argv);
-
- if (verbose > 1)
- printf("x86_energy_perf_policy Nov 24, 2010"
- " - Len Brown <lenb@kernel.org>\n");
- if (verbose > 1 && !read_only)
- printf("new_bias %lld\n", new_bias);
-
- validate_cpuid();
-
- if (cpu != -1) {
- if (read_only)
- print_msr(cpu);
- else
- update_msr(cpu);
- } else {
- if (read_only)
- for_every_cpu(print_msr);
- else
- for_every_cpu(update_msr);
- }
-
- return 0;
-}
+/*
+ * x86_energy_perf_policy -- set the energy versus performance
+ * policy preference bias on recent X86 processors.
+ */
+/*
+ * Copyright (c) 2010 - 2017 Intel Corporation.
+ * Len Brown <len.brown@intel.com>
+ *
+ * This program is released under GPL v2
+ */
+
+#define _GNU_SOURCE
+#include MSRHEADER
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sched.h>
+#include <sys/stat.h>
+#include <sys/resource.h>
+#include <getopt.h>
+#include <err.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <sys/time.h>
+#include <limits.h>
+#include <stdlib.h>
+#include <string.h>
+#include <cpuid.h>
+#include <errno.h>
+
+#define OPTARG_NORMAL (INT_MAX - 1)
+#define OPTARG_POWER (INT_MAX - 2)
+#define OPTARG_BALANCE_POWER (INT_MAX - 3)
+#define OPTARG_BALANCE_PERFORMANCE (INT_MAX - 4)
+#define OPTARG_PERFORMANCE (INT_MAX - 5)
+
+struct msr_hwp_cap {
+ unsigned char highest;
+ unsigned char guaranteed;
+ unsigned char efficient;
+ unsigned char lowest;
+};
+
+struct msr_hwp_request {
+ unsigned char hwp_min;
+ unsigned char hwp_max;
+ unsigned char hwp_desired;
+ unsigned char hwp_epp;
+ unsigned int hwp_window;
+ unsigned char hwp_use_pkg;
+} req_update;
+
+unsigned int debug;
+unsigned int verbose;
+unsigned int force;
+char *progname;
+int base_cpu;
+unsigned char update_epb;
+unsigned long long new_epb;
+unsigned char turbo_is_enabled;
+unsigned char update_turbo;
+unsigned char turbo_update_value;
+unsigned char update_hwp_epp;
+unsigned char update_hwp_min;
+unsigned char update_hwp_max;
+unsigned char update_hwp_desired;
+unsigned char update_hwp_window;
+unsigned char update_hwp_use_pkg;
+unsigned char update_hwp_enable;
+#define hwp_update_enabled() (update_hwp_enable | update_hwp_epp | update_hwp_max | update_hwp_min | update_hwp_desired | update_hwp_window | update_hwp_use_pkg)
+int max_cpu_num;
+int max_pkg_num;
+#define MAX_PACKAGES 64
+unsigned int first_cpu_in_pkg[MAX_PACKAGES];
+unsigned long long pkg_present_set;
+unsigned long long pkg_selected_set;
+cpu_set_t *cpu_present_set;
+cpu_set_t *cpu_selected_set;
+int genuine_intel;
+
+size_t cpu_setsize;
+
+char *proc_stat = "/proc/stat";
+
+unsigned int has_epb; /* MSR_IA32_ENERGY_PERF_BIAS */
+unsigned int has_hwp; /* IA32_PM_ENABLE, IA32_HWP_CAPABILITIES */
+ /* IA32_HWP_REQUEST, IA32_HWP_STATUS */
+unsigned int has_hwp_notify; /* IA32_HWP_INTERRUPT */
+unsigned int has_hwp_activity_window; /* IA32_HWP_REQUEST[bits 41:32] */
+unsigned int has_hwp_epp; /* IA32_HWP_REQUEST[bits 31:24] */
+unsigned int has_hwp_request_pkg; /* IA32_HWP_REQUEST_PKG */
+
+unsigned int bdx_highest_ratio;
+
+/*
+ * maintain compatibility with original implementation, but don't document it:
+ */
+void usage(void)
+{
+ fprintf(stderr, "%s [options] [scope][field value]\n", progname);
+ fprintf(stderr, "scope: --cpu cpu-list [--hwp-use-pkg #] | --pkg pkg-list\n");
+ fprintf(stderr, "field: --all | --epb | --hwp-epp | --hwp-min | --hwp-max | --hwp-desired\n");
+ fprintf(stderr, "other: --hwp-enable | --turbo-enable (0 | 1) | --help | --force\n");
+ fprintf(stderr,
+ "value: ( # | \"normal\" | \"performance\" | \"balance-performance\" | \"balance-power\"| \"power\")\n");
+ fprintf(stderr, "--hwp-window usec\n");
+
+ fprintf(stderr, "Specify only Energy Performance BIAS (legacy usage):\n");
+ fprintf(stderr, "%s: [-c cpu] [-v] (-r | policy-value )\n", progname);
+
+ exit(1);
+}
+
+/*
+ * If bdx_highest_ratio is set,
+ * then we must translate between MSR format and simple ratio
+ * used on the cmdline.
+ */
+int ratio_2_msr_perf(int ratio)
+{
+ int msr_perf;
+
+ if (!bdx_highest_ratio)
+ return ratio;
+
+ msr_perf = ratio * 255 / bdx_highest_ratio;
+
+ if (debug)
+ fprintf(stderr, "%d = ratio_to_msr_perf(%d)\n", msr_perf, ratio);
+
+ return msr_perf;
+}
+int msr_perf_2_ratio(int msr_perf)
+{
+ int ratio;
+ double d;
+
+ if (!bdx_highest_ratio)
+ return msr_perf;
+
+ d = (double)msr_perf * (double) bdx_highest_ratio / 255.0;
+ d = d + 0.5; /* round */
+ ratio = (int)d;
+
+ if (debug)
+ fprintf(stderr, "%d = msr_perf_ratio(%d) {%f}\n", ratio, msr_perf, d);
+
+ return ratio;
+}
+int parse_cmdline_epb(int i)
+{
+ if (!has_epb)
+ errx(1, "EPB not enabled on this platform");
+
+ update_epb = 1;
+
+ switch (i) {
+ case OPTARG_POWER:
+ return ENERGY_PERF_BIAS_POWERSAVE;
+ case OPTARG_BALANCE_POWER:
+ return ENERGY_PERF_BIAS_BALANCE_POWERSAVE;
+ case OPTARG_NORMAL:
+ return ENERGY_PERF_BIAS_NORMAL;
+ case OPTARG_BALANCE_PERFORMANCE:
+ return ENERGY_PERF_BIAS_BALANCE_PERFORMANCE;
+ case OPTARG_PERFORMANCE:
+ return ENERGY_PERF_BIAS_PERFORMANCE;
+ }
+ if (i < 0 || i > ENERGY_PERF_BIAS_POWERSAVE)
+ errx(1, "--epb must be from 0 to 15");
+ return i;
+}
+
+#define HWP_CAP_LOWEST 0
+#define HWP_CAP_HIGHEST 255
+
+/*
+ * "performance" changes hwp_min to cap.highest
+ * All others leave it at cap.lowest
+ */
+int parse_cmdline_hwp_min(int i)
+{
+ update_hwp_min = 1;
+
+ switch (i) {
+ case OPTARG_POWER:
+ case OPTARG_BALANCE_POWER:
+ case OPTARG_NORMAL:
+ case OPTARG_BALANCE_PERFORMANCE:
+ return HWP_CAP_LOWEST;
+ case OPTARG_PERFORMANCE:
+ return HWP_CAP_HIGHEST;
+ }
+ return i;
+}
+/*
+ * "power" changes hwp_max to cap.lowest
+ * All others leave it at cap.highest
+ */
+int parse_cmdline_hwp_max(int i)
+{
+ update_hwp_max = 1;
+
+ switch (i) {
+ case OPTARG_POWER:
+ return HWP_CAP_LOWEST;
+ case OPTARG_NORMAL:
+ case OPTARG_BALANCE_POWER:
+ case OPTARG_BALANCE_PERFORMANCE:
+ case OPTARG_PERFORMANCE:
+ return HWP_CAP_HIGHEST;
+ }
+ return i;
+}
+/*
+ * for --hwp-des, all strings leave it in autonomous mode
+ * If you want to change it, you need to explicitly pick a value
+ */
+int parse_cmdline_hwp_desired(int i)
+{
+ update_hwp_desired = 1;
+
+ switch (i) {
+ case OPTARG_POWER:
+ case OPTARG_BALANCE_POWER:
+ case OPTARG_BALANCE_PERFORMANCE:
+ case OPTARG_NORMAL:
+ case OPTARG_PERFORMANCE:
+ return 0; /* autonomous */
+ }
+ return i;
+}
+
+int parse_cmdline_hwp_window(int i)
+{
+ unsigned int exponent;
+
+ update_hwp_window = 1;
+
+ switch (i) {
+ case OPTARG_POWER:
+ case OPTARG_BALANCE_POWER:
+ case OPTARG_NORMAL:
+ case OPTARG_BALANCE_PERFORMANCE:
+ case OPTARG_PERFORMANCE:
+ return 0;
+ }
+ if (i < 0 || i > 1270000000) {
+ fprintf(stderr, "--hwp-window: 0 for auto; 1 - 1270000000 usec for window duration\n");
+ usage();
+ }
+ for (exponent = 0; ; ++exponent) {
+ if (debug)
+ printf("%d 10^%d\n", i, exponent);
+
+ if (i <= 127)
+ break;
+
+ i = i / 10;
+ }
+ if (debug)
+ fprintf(stderr, "%d*10^%d: 0x%x\n", i, exponent, (exponent << 7) | i);
+
+ return (exponent << 7) | i;
+}
+int parse_cmdline_hwp_epp(int i)
+{
+ update_hwp_epp = 1;
+
+ switch (i) {
+ case OPTARG_POWER:
+ return HWP_EPP_POWERSAVE;
+ case OPTARG_BALANCE_POWER:
+ return HWP_EPP_BALANCE_POWERSAVE;
+ case OPTARG_NORMAL:
+ case OPTARG_BALANCE_PERFORMANCE:
+ return HWP_EPP_BALANCE_PERFORMANCE;
+ case OPTARG_PERFORMANCE:
+ return HWP_EPP_PERFORMANCE;
+ }
+ if (i < 0 || i > 0xff) {
+ fprintf(stderr, "--hwp-epp must be from 0 to 0xff\n");
+ usage();
+ }
+ return i;
+}
+int parse_cmdline_turbo(int i)
+{
+ update_turbo = 1;
+
+ switch (i) {
+ case OPTARG_POWER:
+ return 0;
+ case OPTARG_NORMAL:
+ case OPTARG_BALANCE_POWER:
+ case OPTARG_BALANCE_PERFORMANCE:
+ case OPTARG_PERFORMANCE:
+ return 1;
+ }
+ if (i < 0 || i > 1) {
+ fprintf(stderr, "--turbo-enable: 1 to enable, 0 to disable\n");
+ usage();
+ }
+ return i;
+}
+
+int parse_optarg_string(char *s)
+{
+ int i;
+ char *endptr;
+
+ if (!strncmp(s, "default", 7))
+ return OPTARG_NORMAL;
+
+ if (!strncmp(s, "normal", 6))
+ return OPTARG_NORMAL;
+
+ if (!strncmp(s, "power", 9))
+ return OPTARG_POWER;
+
+ if (!strncmp(s, "balance-power", 17))
+ return OPTARG_BALANCE_POWER;
+
+ if (!strncmp(s, "balance-performance", 19))
+ return OPTARG_BALANCE_PERFORMANCE;
+
+ if (!strncmp(s, "performance", 11))
+ return OPTARG_PERFORMANCE;
+
+ i = strtol(s, &endptr, 0);
+ if (s == endptr) {
+ fprintf(stderr, "no digits in \"%s\"\n", s);
+ usage();
+ }
+ if (i == LONG_MIN || i == LONG_MAX)
+ errx(-1, "%s", s);
+
+ if (i > 0xFF)
+ errx(-1, "%d (0x%x) must be < 256", i, i);
+
+ if (i < 0)
+ errx(-1, "%d (0x%x) must be >= 0", i, i);
+ return i;
+}
+
+void parse_cmdline_all(char *s)
+{
+ force++;
+ update_hwp_enable = 1;
+ req_update.hwp_min = parse_cmdline_hwp_min(parse_optarg_string(s));
+ req_update.hwp_max = parse_cmdline_hwp_max(parse_optarg_string(s));
+ req_update.hwp_epp = parse_cmdline_hwp_epp(parse_optarg_string(s));
+ if (has_epb)
+ new_epb = parse_cmdline_epb(parse_optarg_string(s));
+ turbo_update_value = parse_cmdline_turbo(parse_optarg_string(s));
+ req_update.hwp_desired = parse_cmdline_hwp_desired(parse_optarg_string(s));
+ req_update.hwp_window = parse_cmdline_hwp_window(parse_optarg_string(s));
+}
+
+void validate_cpu_selected_set(void)
+{
+ int cpu;
+
+ if (CPU_COUNT_S(cpu_setsize, cpu_selected_set) == 0)
+ errx(0, "no CPUs requested");
+
+ for (cpu = 0; cpu <= max_cpu_num; ++cpu) {
+ if (CPU_ISSET_S(cpu, cpu_setsize, cpu_selected_set))
+ if (!CPU_ISSET_S(cpu, cpu_setsize, cpu_present_set))
+ errx(1, "Requested cpu% is not present", cpu);
+ }
+}
+
+void parse_cmdline_cpu(char *s)
+{
+ char *startp, *endp;
+ int cpu = 0;
+
+ if (pkg_selected_set) {
+ usage();
+ errx(1, "--cpu | --pkg");
+ }
+ cpu_selected_set = CPU_ALLOC((max_cpu_num + 1));
+ if (cpu_selected_set == NULL)
+ err(1, "cpu_selected_set");
+ CPU_ZERO_S(cpu_setsize, cpu_selected_set);
+
+ for (startp = s; startp && *startp;) {
+
+ if (*startp == ',') {
+ startp++;
+ continue;
+ }
+
+ if (*startp == '-') {
+ int end_cpu;
+
+ startp++;
+ end_cpu = strtol(startp, &endp, 10);
+ if (startp == endp)
+ continue;
+
+ while (cpu <= end_cpu) {
+ if (cpu > max_cpu_num)
+ errx(1, "Requested cpu%d exceeds max cpu%d", cpu, max_cpu_num);
+ CPU_SET_S(cpu, cpu_setsize, cpu_selected_set);
+ cpu++;
+ }
+ startp = endp;
+ continue;
+ }
+
+ if (strncmp(startp, "all", 3) == 0) {
+ for (cpu = 0; cpu <= max_cpu_num; cpu += 1) {
+ if (CPU_ISSET_S(cpu, cpu_setsize, cpu_present_set))
+ CPU_SET_S(cpu, cpu_setsize, cpu_selected_set);
+ }
+ startp += 3;
+ if (*startp == 0)
+ break;
+ }
+ /* "--cpu even" is not documented */
+ if (strncmp(startp, "even", 4) == 0) {
+ for (cpu = 0; cpu <= max_cpu_num; cpu += 2) {
+ if (CPU_ISSET_S(cpu, cpu_setsize, cpu_present_set))
+ CPU_SET_S(cpu, cpu_setsize, cpu_selected_set);
+ }
+ startp += 4;
+ if (*startp == 0)
+ break;
+ }
+
+ /* "--cpu odd" is not documented */
+ if (strncmp(startp, "odd", 3) == 0) {
+ for (cpu = 1; cpu <= max_cpu_num; cpu += 2) {
+ if (CPU_ISSET_S(cpu, cpu_setsize, cpu_present_set))
+ CPU_SET_S(cpu, cpu_setsize, cpu_selected_set);
+ }
+ startp += 3;
+ if (*startp == 0)
+ break;
+ }
+
+ cpu = strtol(startp, &endp, 10);
+ if (startp == endp)
+ errx(1, "--cpu cpu-set: confused by '%s'", startp);
+ if (cpu > max_cpu_num)
+ errx(1, "Requested cpu%d exceeds max cpu%d", cpu, max_cpu_num);
+ CPU_SET_S(cpu, cpu_setsize, cpu_selected_set);
+ startp = endp;
+ }
+
+ validate_cpu_selected_set();
+
+}
+
+void parse_cmdline_pkg(char *s)
+{
+ char *startp, *endp;
+ int pkg = 0;
+
+ if (cpu_selected_set) {
+ usage();
+ errx(1, "--pkg | --cpu");
+ }
+ pkg_selected_set = 0;
+
+ for (startp = s; startp && *startp;) {
+
+ if (*startp == ',') {
+ startp++;
+ continue;
+ }
+
+ if (*startp == '-') {
+ int end_pkg;
+
+ startp++;
+ end_pkg = strtol(startp, &endp, 10);
+ if (startp == endp)
+ continue;
+
+ while (pkg <= end_pkg) {
+ if (pkg > max_pkg_num)
+ errx(1, "Requested pkg%d exceeds max pkg%d", pkg, max_pkg_num);
+ pkg_selected_set |= 1 << pkg;
+ pkg++;
+ }
+ startp = endp;
+ continue;
+ }
+
+ if (strncmp(startp, "all", 3) == 0) {
+ pkg_selected_set = pkg_present_set;
+ return;
+ }
+
+ pkg = strtol(startp, &endp, 10);
+ if (pkg > max_pkg_num)
+ errx(1, "Requested pkg%d Exceeds max pkg%d", pkg, max_pkg_num);
+ pkg_selected_set |= 1 << pkg;
+ startp = endp;
+ }
+}
+
+void for_packages(unsigned long long pkg_set, int (func)(int))
+{
+ int pkg_num;
+
+ for (pkg_num = 0; pkg_num <= max_pkg_num; ++pkg_num) {
+ if (pkg_set & (1UL << pkg_num))
+ func(pkg_num);
+ }
+}
+
+void print_version(void)
+{
+ printf("x86_energy_perf_policy 17.05.11 (C) Len Brown <len.brown@intel.com>\n");
+}
+
+void cmdline(int argc, char **argv)
+{
+ int opt;
+ int option_index = 0;
+
+ static struct option long_options[] = {
+ {"all", required_argument, 0, 'a'},
+ {"cpu", required_argument, 0, 'c'},
+ {"pkg", required_argument, 0, 'p'},
+ {"debug", no_argument, 0, 'd'},
+ {"hwp-desired", required_argument, 0, 'D'},
+ {"epb", required_argument, 0, 'B'},
+ {"force", no_argument, 0, 'f'},
+ {"hwp-enable", no_argument, 0, 'e'},
+ {"help", no_argument, 0, 'h'},
+ {"hwp-epp", required_argument, 0, 'P'},
+ {"hwp-min", required_argument, 0, 'm'},
+ {"hwp-max", required_argument, 0, 'M'},
+ {"read", no_argument, 0, 'r'},
+ {"turbo-enable", required_argument, 0, 't'},
+ {"hwp-use-pkg", required_argument, 0, 'u'},
+ {"version", no_argument, 0, 'v'},
+ {"hwp-window", required_argument, 0, 'w'},
+ {0, 0, 0, 0 }
+ };
+
+ progname = argv[0];
+
+ while ((opt = getopt_long_only(argc, argv, "+a:c:dD:E:e:f:m:M:rt:u:vw",
+ long_options, &option_index)) != -1) {
+ switch (opt) {
+ case 'a':
+ parse_cmdline_all(optarg);
+ break;
+ case 'B':
+ new_epb = parse_cmdline_epb(parse_optarg_string(optarg));
+ break;
+ case 'c':
+ parse_cmdline_cpu(optarg);
+ break;
+ case 'e':
+ update_hwp_enable = 1;
+ break;
+ case 'h':
+ usage();
+ break;
+ case 'd':
+ debug++;
+ verbose++;
+ break;
+ case 'f':
+ force++;
+ break;
+ case 'D':
+ req_update.hwp_desired = parse_cmdline_hwp_desired(parse_optarg_string(optarg));
+ break;
+ case 'm':
+ req_update.hwp_min = parse_cmdline_hwp_min(parse_optarg_string(optarg));
+ break;
+ case 'M':
+ req_update.hwp_max = parse_cmdline_hwp_max(parse_optarg_string(optarg));
+ break;
+ case 'p':
+ parse_cmdline_pkg(optarg);
+ break;
+ case 'P':
+ req_update.hwp_epp = parse_cmdline_hwp_epp(parse_optarg_string(optarg));
+ break;
+ case 'r':
+ /* v1 used -r to specify read-only mode, now the default */
+ break;
+ case 't':
+ turbo_update_value = parse_cmdline_turbo(parse_optarg_string(optarg));
+ break;
+ case 'u':
+ update_hwp_use_pkg++;
+ if (atoi(optarg) == 0)
+ req_update.hwp_use_pkg = 0;
+ else
+ req_update.hwp_use_pkg = 1;
+ break;
+ case 'v':
+ print_version();
+ exit(0);
+ break;
+ case 'w':
+ req_update.hwp_window = parse_cmdline_hwp_window(parse_optarg_string(optarg));
+ break;
+ default:
+ usage();
+ }
+ }
+ /*
+ * v1 allowed "performance"|"normal"|"power" with no policy specifier
+ * to update BIAS. Continue to support that, even though no longer documented.
+ */
+ if (argc == optind + 1)
+ new_epb = parse_cmdline_epb(parse_optarg_string(argv[optind]));
+
+ if (argc > optind + 1) {
+ fprintf(stderr, "stray parameter '%s'\n", argv[optind + 1]);
+ usage();
+ }
+}
+
+
+int get_msr(int cpu, int offset, unsigned long long *msr)
+{
+ int retval;
+ char pathname[32];
+ int fd;
+
+ sprintf(pathname, "/dev/cpu/%d/msr", cpu);
+ fd = open(pathname, O_RDONLY);
+ if (fd < 0)
+ err(-1, "%s open failed, try chown or chmod +r /dev/cpu/*/msr, or run as root", pathname);
+
+ retval = pread(fd, msr, sizeof(*msr), offset);
+ if (retval != sizeof(*msr))
+ err(-1, "%s offset 0x%llx read failed", pathname, (unsigned long long)offset);
+
+ if (debug > 1)
+ fprintf(stderr, "get_msr(cpu%d, 0x%X, 0x%llX)\n", cpu, offset, *msr);
+
+ close(fd);
+ return 0;
+}
+
+int put_msr(int cpu, int offset, unsigned long long new_msr)
+{
+ char pathname[32];
+ int retval;
+ int fd;
+
+ sprintf(pathname, "/dev/cpu/%d/msr", cpu);
+ fd = open(pathname, O_RDWR);
+ if (fd < 0)
+ err(-1, "%s open failed, try chown or chmod +r /dev/cpu/*/msr, or run as root", pathname);
+
+ retval = pwrite(fd, &new_msr, sizeof(new_msr), offset);
+ if (retval != sizeof(new_msr))
+ err(-2, "pwrite(cpu%d, offset 0x%x, 0x%llx) = %d", cpu, offset, new_msr, retval);
+
+ close(fd);
+
+ if (debug > 1)
+ fprintf(stderr, "put_msr(cpu%d, 0x%X, 0x%llX)\n", cpu, offset, new_msr);
+
+ return 0;
+}
+
+void print_hwp_cap(int cpu, struct msr_hwp_cap *cap, char *str)
+{
+ if (cpu != -1)
+ printf("cpu%d: ", cpu);
+
+ printf("HWP_CAP: low %d eff %d guar %d high %d\n",
+ cap->lowest, cap->efficient, cap->guaranteed, cap->highest);
+}
+void read_hwp_cap(int cpu, struct msr_hwp_cap *cap, unsigned int msr_offset)
+{
+ unsigned long long msr;
+
+ get_msr(cpu, msr_offset, &msr);
+
+ cap->highest = msr_perf_2_ratio(HWP_HIGHEST_PERF(msr));
+ cap->guaranteed = msr_perf_2_ratio(HWP_GUARANTEED_PERF(msr));
+ cap->efficient = msr_perf_2_ratio(HWP_MOSTEFFICIENT_PERF(msr));
+ cap->lowest = msr_perf_2_ratio(HWP_LOWEST_PERF(msr));
+}
+
+void print_hwp_request(int cpu, struct msr_hwp_request *h, char *str)
+{
+ if (cpu != -1)
+ printf("cpu%d: ", cpu);
+
+ if (str)
+ printf("%s", str);
+
+ printf("HWP_REQ: min %d max %d des %d epp %d window 0x%x (%d*10^%dus) use_pkg %d\n",
+ h->hwp_min, h->hwp_max, h->hwp_desired, h->hwp_epp,
+ h->hwp_window, h->hwp_window & 0x7F, (h->hwp_window >> 7) & 0x7, h->hwp_use_pkg);
+}
+void print_hwp_request_pkg(int pkg, struct msr_hwp_request *h, char *str)
+{
+ printf("pkg%d: ", pkg);
+
+ if (str)
+ printf("%s", str);
+
+ printf("HWP_REQ_PKG: min %d max %d des %d epp %d window 0x%x (%d*10^%dus)\n",
+ h->hwp_min, h->hwp_max, h->hwp_desired, h->hwp_epp,
+ h->hwp_window, h->hwp_window & 0x7F, (h->hwp_window >> 7) & 0x7);
+}
+void read_hwp_request(int cpu, struct msr_hwp_request *hwp_req, unsigned int msr_offset)
+{
+ unsigned long long msr;
+
+ get_msr(cpu, msr_offset, &msr);
+
+ hwp_req->hwp_min = msr_perf_2_ratio((((msr) >> 0) & 0xff));
+ hwp_req->hwp_max = msr_perf_2_ratio((((msr) >> 8) & 0xff));
+ hwp_req->hwp_desired = msr_perf_2_ratio((((msr) >> 16) & 0xff));
+ hwp_req->hwp_epp = (((msr) >> 24) & 0xff);
+ hwp_req->hwp_window = (((msr) >> 32) & 0x3ff);
+ hwp_req->hwp_use_pkg = (((msr) >> 42) & 0x1);
+}
+
+void write_hwp_request(int cpu, struct msr_hwp_request *hwp_req, unsigned int msr_offset)
+{
+ unsigned long long msr = 0;
+
+ if (debug > 1)
+ printf("cpu%d: requesting min %d max %d des %d epp %d window 0x%0x use_pkg %d\n",
+ cpu, hwp_req->hwp_min, hwp_req->hwp_max,
+ hwp_req->hwp_desired, hwp_req->hwp_epp,
+ hwp_req->hwp_window, hwp_req->hwp_use_pkg);
+
+ msr |= HWP_MIN_PERF(ratio_2_msr_perf(hwp_req->hwp_min));
+ msr |= HWP_MAX_PERF(ratio_2_msr_perf(hwp_req->hwp_max));
+ msr |= HWP_DESIRED_PERF(ratio_2_msr_perf(hwp_req->hwp_desired));
+ msr |= HWP_ENERGY_PERF_PREFERENCE(hwp_req->hwp_epp);
+ msr |= HWP_ACTIVITY_WINDOW(hwp_req->hwp_window);
+ msr |= HWP_PACKAGE_CONTROL(hwp_req->hwp_use_pkg);
+
+ put_msr(cpu, msr_offset, msr);
+}
+
+int print_cpu_msrs(int cpu)
+{
+ unsigned long long msr;
+ struct msr_hwp_request req;
+ struct msr_hwp_cap cap;
+
+ if (has_epb) {
+ get_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS, &msr);
+
+ printf("cpu%d: EPB %u\n", cpu, (unsigned int) msr);
+ }
+
+ if (!has_hwp)
+ return 0;
+
+ read_hwp_request(cpu, &req, MSR_HWP_REQUEST);
+ print_hwp_request(cpu, &req, "");
+
+ read_hwp_cap(cpu, &cap, MSR_HWP_CAPABILITIES);
+ print_hwp_cap(cpu, &cap, "");
+
+ return 0;
+}
+
+int print_pkg_msrs(int pkg)
+{
+ struct msr_hwp_request req;
+ unsigned long long msr;
+
+ if (!has_hwp)
+ return 0;
+
+ read_hwp_request(first_cpu_in_pkg[pkg], &req, MSR_HWP_REQUEST_PKG);
+ print_hwp_request_pkg(pkg, &req, "");
+
+ if (has_hwp_notify) {
+ get_msr(first_cpu_in_pkg[pkg], MSR_HWP_INTERRUPT, &msr);
+ fprintf(stderr,
+ "pkg%d: MSR_HWP_INTERRUPT: 0x%08llx (Excursion_Min-%sabled, Guaranteed_Perf_Change-%sabled)\n",
+ pkg, msr,
+ ((msr) & 0x2) ? "EN" : "Dis",
+ ((msr) & 0x1) ? "EN" : "Dis");
+ }
+ get_msr(first_cpu_in_pkg[pkg], MSR_HWP_STATUS, &msr);
+ fprintf(stderr,
+ "pkg%d: MSR_HWP_STATUS: 0x%08llx (%sExcursion_Min, %sGuaranteed_Perf_Change)\n",
+ pkg, msr,
+ ((msr) & 0x4) ? "" : "No-",
+ ((msr) & 0x1) ? "" : "No-");
+
+ return 0;
+}
+
+/*
+ * Assumption: All HWP systems have 100 MHz bus clock
+ */
+int ratio_2_sysfs_khz(int ratio)
+{
+ int bclk_khz = 100 * 1000; /* 100,000 KHz = 100 MHz */
+
+ return ratio * bclk_khz;
+}
+/*
+ * If HWP is enabled and cpufreq sysfs attribtes are present,
+ * then update sysfs, so that it will not become
+ * stale when we write to MSRs.
+ * (intel_pstate's max_perf_pct and min_perf_pct will follow cpufreq,
+ * so we don't have to touch that.)
+ */
+void update_cpufreq_scaling_freq(int is_max, int cpu, unsigned int ratio)
+{
+ char pathname[64];
+ FILE *fp;
+ int retval;
+ int khz;
+
+ sprintf(pathname, "/sys/devices/system/cpu/cpu%d/cpufreq/scaling_%s_freq",
+ cpu, is_max ? "max" : "min");
+
+ fp = fopen(pathname, "w");
+ if (!fp) {
+ if (debug)
+ perror(pathname);
+ return;
+ }
+
+ khz = ratio_2_sysfs_khz(ratio);
+ retval = fprintf(fp, "%d", khz);
+ if (retval < 0)
+ if (debug)
+ perror("fprintf");
+ if (debug)
+ printf("echo %d > %s\n", khz, pathname);
+
+ fclose(fp);
+}
+
+/*
+ * We update all sysfs before updating any MSRs because of
+ * bugs in cpufreq/intel_pstate where the sysfs writes
+ * for a CPU may change the min/max values on other CPUS.
+ */
+
+int update_sysfs(int cpu)
+{
+ if (!has_hwp)
+ return 0;
+
+ if (!hwp_update_enabled())
+ return 0;
+
+ if (access("/sys/devices/system/cpu/cpu0/cpufreq", F_OK))
+ return 0;
+
+ if (update_hwp_min)
+ update_cpufreq_scaling_freq(0, cpu, req_update.hwp_min);
+
+ if (update_hwp_max)
+ update_cpufreq_scaling_freq(1, cpu, req_update.hwp_max);
+
+ return 0;
+}
+
+int verify_hwp_req_self_consistency(int cpu, struct msr_hwp_request *req)
+{
+ /* fail if min > max requested */
+ if (req->hwp_min > req->hwp_max) {
+ errx(1, "cpu%d: requested hwp-min %d > hwp_max %d",
+ cpu, req->hwp_min, req->hwp_max);
+ }
+
+ /* fail if desired > max requestd */
+ if (req->hwp_desired && (req->hwp_desired > req->hwp_max)) {
+ errx(1, "cpu%d: requested hwp-desired %d > hwp_max %d",
+ cpu, req->hwp_desired, req->hwp_max);
+ }
+ /* fail if desired < min requestd */
+ if (req->hwp_desired && (req->hwp_desired < req->hwp_min)) {
+ errx(1, "cpu%d: requested hwp-desired %d < requested hwp_min %d",
+ cpu, req->hwp_desired, req->hwp_min);
+ }
+
+ return 0;
+}
+
+int check_hwp_request_v_hwp_capabilities(int cpu, struct msr_hwp_request *req, struct msr_hwp_cap *cap)
+{
+ if (update_hwp_max) {
+ if (req->hwp_max > cap->highest)
+ errx(1, "cpu%d: requested max %d > capabilities highest %d, use --force?",
+ cpu, req->hwp_max, cap->highest);
+ if (req->hwp_max < cap->lowest)
+ errx(1, "cpu%d: requested max %d < capabilities lowest %d, use --force?",
+ cpu, req->hwp_max, cap->lowest);
+ }
+
+ if (update_hwp_min) {
+ if (req->hwp_min > cap->highest)
+ errx(1, "cpu%d: requested min %d > capabilities highest %d, use --force?",
+ cpu, req->hwp_min, cap->highest);
+ if (req->hwp_min < cap->lowest)
+ errx(1, "cpu%d: requested min %d < capabilities lowest %d, use --force?",
+ cpu, req->hwp_min, cap->lowest);
+ }
+
+ if (update_hwp_min && update_hwp_max && (req->hwp_min > req->hwp_max))
+ errx(1, "cpu%d: requested min %d > requested max %d",
+ cpu, req->hwp_min, req->hwp_max);
+
+ if (update_hwp_desired && req->hwp_desired) {
+ if (req->hwp_desired > req->hwp_max)
+ errx(1, "cpu%d: requested desired %d > requested max %d, use --force?",
+ cpu, req->hwp_desired, req->hwp_max);
+ if (req->hwp_desired < req->hwp_min)
+ errx(1, "cpu%d: requested desired %d < requested min %d, use --force?",
+ cpu, req->hwp_desired, req->hwp_min);
+ if (req->hwp_desired < cap->lowest)
+ errx(1, "cpu%d: requested desired %d < capabilities lowest %d, use --force?",
+ cpu, req->hwp_desired, cap->lowest);
+ if (req->hwp_desired > cap->highest)
+ errx(1, "cpu%d: requested desired %d > capabilities highest %d, use --force?",
+ cpu, req->hwp_desired, cap->highest);
+ }
+
+ return 0;
+}
+
+int update_hwp_request(int cpu)
+{
+ struct msr_hwp_request req;
+ struct msr_hwp_cap cap;
+
+ int msr_offset = MSR_HWP_REQUEST;
+
+ read_hwp_request(cpu, &req, msr_offset);
+ if (debug)
+ print_hwp_request(cpu, &req, "old: ");
+
+ if (update_hwp_min)
+ req.hwp_min = req_update.hwp_min;
+
+ if (update_hwp_max)
+ req.hwp_max = req_update.hwp_max;
+
+ if (update_hwp_desired)
+ req.hwp_desired = req_update.hwp_desired;
+
+ if (update_hwp_window)
+ req.hwp_window = req_update.hwp_window;
+
+ if (update_hwp_epp)
+ req.hwp_epp = req_update.hwp_epp;
+
+ req.hwp_use_pkg = req_update.hwp_use_pkg;
+
+ read_hwp_cap(cpu, &cap, MSR_HWP_CAPABILITIES);
+ if (debug)
+ print_hwp_cap(cpu, &cap, "");
+
+ if (!force)
+ check_hwp_request_v_hwp_capabilities(cpu, &req, &cap);
+
+ verify_hwp_req_self_consistency(cpu, &req);
+
+ write_hwp_request(cpu, &req, msr_offset);
+
+ if (debug) {
+ read_hwp_request(cpu, &req, msr_offset);
+ print_hwp_request(cpu, &req, "new: ");
+ }
+ return 0;
+}
+int update_hwp_request_pkg(int pkg)
+{
+ struct msr_hwp_request req;
+ struct msr_hwp_cap cap;
+ int cpu = first_cpu_in_pkg[pkg];
+
+ int msr_offset = MSR_HWP_REQUEST_PKG;
+
+ read_hwp_request(cpu, &req, msr_offset);
+ if (debug)
+ print_hwp_request_pkg(pkg, &req, "old: ");
+
+ if (update_hwp_min)
+ req.hwp_min = req_update.hwp_min;
+
+ if (update_hwp_max)
+ req.hwp_max = req_update.hwp_max;
+
+ if (update_hwp_desired)
+ req.hwp_desired = req_update.hwp_desired;
+
+ if (update_hwp_window)
+ req.hwp_window = req_update.hwp_window;
+
+ if (update_hwp_epp)
+ req.hwp_epp = req_update.hwp_epp;
+
+ read_hwp_cap(cpu, &cap, MSR_HWP_CAPABILITIES);
+ if (debug)
+ print_hwp_cap(cpu, &cap, "");
+
+ if (!force)
+ check_hwp_request_v_hwp_capabilities(cpu, &req, &cap);
+
+ verify_hwp_req_self_consistency(cpu, &req);
+
+ write_hwp_request(cpu, &req, msr_offset);
+
+ if (debug) {
+ read_hwp_request(cpu, &req, msr_offset);
+ print_hwp_request_pkg(pkg, &req, "new: ");
+ }
+ return 0;
+}
+
+int enable_hwp_on_cpu(int cpu)
+{
+ unsigned long long msr;
+
+ get_msr(cpu, MSR_PM_ENABLE, &msr);
+ put_msr(cpu, MSR_PM_ENABLE, 1);
+
+ if (verbose)
+ printf("cpu%d: MSR_PM_ENABLE old: %d new: %d\n", cpu, (unsigned int) msr, 1);
+
+ return 0;
+}
+
+int update_cpu_msrs(int cpu)
+{
+ unsigned long long msr;
+
+
+ if (update_epb) {
+ get_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS, &msr);
+ put_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS, new_epb);
+
+ if (verbose)
+ printf("cpu%d: ENERGY_PERF_BIAS old: %d new: %d\n",
+ cpu, (unsigned int) msr, (unsigned int) new_epb);
+ }
+
+ if (update_turbo) {
+ int turbo_is_present_and_disabled;
+
+ get_msr(cpu, MSR_IA32_MISC_ENABLE, &msr);
+
+ turbo_is_present_and_disabled = ((msr & MSR_IA32_MISC_ENABLE_TURBO_DISABLE) != 0);
+
+ if (turbo_update_value == 1) {
+ if (turbo_is_present_and_disabled) {
+ msr &= ~MSR_IA32_MISC_ENABLE_TURBO_DISABLE;
+ put_msr(cpu, MSR_IA32_MISC_ENABLE, msr);
+ if (verbose)
+ printf("cpu%d: turbo ENABLE\n", cpu);
+ }
+ } else {
+ /*
+ * if "turbo_is_enabled" were known to be describe this cpu
+ * then we could use it here to skip redundant disable requests.
+ * but cpu may be in a different package, so we always write.
+ */
+ msr |= MSR_IA32_MISC_ENABLE_TURBO_DISABLE;
+ put_msr(cpu, MSR_IA32_MISC_ENABLE, msr);
+ if (verbose)
+ printf("cpu%d: turbo DISABLE\n", cpu);
+ }
+ }
+
+ if (!has_hwp)
+ return 0;
+
+ if (!hwp_update_enabled())
+ return 0;
+
+ update_hwp_request(cpu);
+ return 0;
+}
+
+/*
+ * Open a file, and exit on failure
+ */
+FILE *fopen_or_die(const char *path, const char *mode)
+{
+ FILE *filep = fopen(path, "r");
+
+ if (!filep)
+ err(1, "%s: open failed", path);
+ return filep;
+}
+
+unsigned int get_pkg_num(int cpu)
+{
+ FILE *fp;
+ char pathname[128];
+ unsigned int pkg;
+ int retval;
+
+ sprintf(pathname, "/sys/devices/system/cpu/cpu%d/topology/physical_package_id", cpu);
+
+ fp = fopen_or_die(pathname, "r");
+ retval = fscanf(fp, "%d\n", &pkg);
+ if (retval != 1)
+ errx(1, "%s: failed to parse", pathname);
+ return pkg;
+}
+
+int set_max_cpu_pkg_num(int cpu)
+{
+ unsigned int pkg;
+
+ if (max_cpu_num < cpu)
+ max_cpu_num = cpu;
+
+ pkg = get_pkg_num(cpu);
+
+ if (pkg >= MAX_PACKAGES)
+ errx(1, "cpu%d: %d >= MAX_PACKAGES (%d)", cpu, pkg, MAX_PACKAGES);
+
+ if (pkg > max_pkg_num)
+ max_pkg_num = pkg;
+
+ if ((pkg_present_set & (1ULL << pkg)) == 0) {
+ pkg_present_set |= (1ULL << pkg);
+ first_cpu_in_pkg[pkg] = cpu;
+ }
+
+ return 0;
+}
+int mark_cpu_present(int cpu)
+{
+ CPU_SET_S(cpu, cpu_setsize, cpu_present_set);
+ return 0;
+}
+
+/*
+ * run func(cpu) on every cpu in /proc/stat
+ * return max_cpu number
+ */
+int for_all_proc_cpus(int (func)(int))
+{
+ FILE *fp;
+ int cpu_num;
+ int retval;
+
+ fp = fopen_or_die(proc_stat, "r");
+
+ retval = fscanf(fp, "cpu %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n");
+ if (retval != 0)
+ err(1, "%s: failed to parse format", proc_stat);
+
+ while (1) {
+ retval = fscanf(fp, "cpu%u %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n", &cpu_num);
+ if (retval != 1)
+ break;
+
+ retval = func(cpu_num);
+ if (retval) {
+ fclose(fp);
+ return retval;
+ }
+ }
+ fclose(fp);
+ return 0;
+}
+
+void for_all_cpus_in_set(size_t set_size, cpu_set_t *cpu_set, int (func)(int))
+{
+ int cpu_num;
+
+ for (cpu_num = 0; cpu_num <= max_cpu_num; ++cpu_num)
+ if (CPU_ISSET_S(cpu_num, set_size, cpu_set))
+ func(cpu_num);
+}
+
+void init_data_structures(void)
+{
+ for_all_proc_cpus(set_max_cpu_pkg_num);
+
+ cpu_setsize = CPU_ALLOC_SIZE((max_cpu_num + 1));
+
+ cpu_present_set = CPU_ALLOC((max_cpu_num + 1));
+ if (cpu_present_set == NULL)
+ err(3, "CPU_ALLOC");
+ CPU_ZERO_S(cpu_setsize, cpu_present_set);
+ for_all_proc_cpus(mark_cpu_present);
+}
+
+/* clear has_hwp if it is not enable (or being enabled) */
+
+void verify_hwp_is_enabled(void)
+{
+ unsigned long long msr;
+
+ if (!has_hwp) /* set in early_cpuid() */
+ return;
+
+ /* MSR_PM_ENABLE[1] == 1 if HWP is enabled and MSRs visible */
+ get_msr(base_cpu, MSR_PM_ENABLE, &msr);
+ if ((msr & 1) == 0) {
+ fprintf(stderr, "HWP can be enabled using '--hwp-enable'\n");
+ has_hwp = 0;
+ return;
+ }
+}
+
+int req_update_bounds_check(void)
+{
+ if (!hwp_update_enabled())
+ return 0;
+
+ /* fail if min > max requested */
+ if ((update_hwp_max && update_hwp_min) &&
+ (req_update.hwp_min > req_update.hwp_max)) {
+ printf("hwp-min %d > hwp_max %d\n", req_update.hwp_min, req_update.hwp_max);
+ return -EINVAL;
+ }
+
+ /* fail if desired > max requestd */
+ if (req_update.hwp_desired && update_hwp_max &&
+ (req_update.hwp_desired > req_update.hwp_max)) {
+ printf("hwp-desired cannot be greater than hwp_max\n");
+ return -EINVAL;
+ }
+ /* fail if desired < min requestd */
+ if (req_update.hwp_desired && update_hwp_min &&
+ (req_update.hwp_desired < req_update.hwp_min)) {
+ printf("hwp-desired cannot be less than hwp_min\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void set_base_cpu(void)
+{
+ base_cpu = sched_getcpu();
+ if (base_cpu < 0)
+ err(-ENODEV, "No valid cpus found");
+}
+
+
+void probe_dev_msr(void)
+{
+ struct stat sb;
+ char pathname[32];
+
+ sprintf(pathname, "/dev/cpu/%d/msr", base_cpu);
+ if (stat(pathname, &sb))
+ if (system("/sbin/modprobe msr > /dev/null 2>&1"))
+ err(-5, "no /dev/cpu/0/msr, Try \"# modprobe msr\" ");
+}
+/*
+ * early_cpuid()
+ * initialize turbo_is_enabled, has_hwp, has_epb
+ * before cmdline is parsed
+ */
+void early_cpuid(void)
+{
+ unsigned int eax, ebx, ecx, edx, max_level;
+ unsigned int fms, family, model;
+
+ __get_cpuid(0, &max_level, &ebx, &ecx, &edx);
+
+ if (max_level < 6)
+ errx(1, "Processor not supported\n");
+
+ __get_cpuid(1, &fms, &ebx, &ecx, &edx);
+ family = (fms >> 8) & 0xf;
+ model = (fms >> 4) & 0xf;
+ if (family == 6 || family == 0xf)
+ model += ((fms >> 16) & 0xf) << 4;
+
+ if (model == 0x4F) {
+ unsigned long long msr;
+
+ get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT, &msr);
+
+ bdx_highest_ratio = msr & 0xFF;
+ }
+
+ __get_cpuid(0x6, &eax, &ebx, &ecx, &edx);
+ turbo_is_enabled = (eax >> 1) & 1;
+ has_hwp = (eax >> 7) & 1;
+ has_epb = (ecx >> 3) & 1;
+}
+
+/*
+ * parse_cpuid()
+ * set
+ * has_hwp, has_hwp_notify, has_hwp_activity_window, has_hwp_epp, has_hwp_request_pkg, has_epb
+ */
+void parse_cpuid(void)
+{
+ unsigned int eax, ebx, ecx, edx, max_level;
+ unsigned int fms, family, model, stepping;
+
+ eax = ebx = ecx = edx = 0;
+
+ __get_cpuid(0, &max_level, &ebx, &ecx, &edx);
+
+ if (ebx == 0x756e6547 && edx == 0x49656e69 && ecx == 0x6c65746e)
+ genuine_intel = 1;
+
+ if (debug)
+ fprintf(stderr, "CPUID(0): %.4s%.4s%.4s ",
+ (char *)&ebx, (char *)&edx, (char *)&ecx);
+
+ __get_cpuid(1, &fms, &ebx, &ecx, &edx);
+ family = (fms >> 8) & 0xf;
+ model = (fms >> 4) & 0xf;
+ stepping = fms & 0xf;
+ if (family == 6 || family == 0xf)
+ model += ((fms >> 16) & 0xf) << 4;
+
+ if (debug) {
+ fprintf(stderr, "%d CPUID levels; family:model:stepping 0x%x:%x:%x (%d:%d:%d)\n",
+ max_level, family, model, stepping, family, model, stepping);
+ fprintf(stderr, "CPUID(1): %s %s %s %s %s %s %s %s\n",
+ ecx & (1 << 0) ? "SSE3" : "-",
+ ecx & (1 << 3) ? "MONITOR" : "-",
+ ecx & (1 << 7) ? "EIST" : "-",
+ ecx & (1 << 8) ? "TM2" : "-",
+ edx & (1 << 4) ? "TSC" : "-",
+ edx & (1 << 5) ? "MSR" : "-",
+ edx & (1 << 22) ? "ACPI-TM" : "-",
+ edx & (1 << 29) ? "TM" : "-");
+ }
+
+ if (!(edx & (1 << 5)))
+ errx(1, "CPUID: no MSR");
+
+
+ __get_cpuid(0x6, &eax, &ebx, &ecx, &edx);
+ /* turbo_is_enabled already set */
+ /* has_hwp already set */
+ has_hwp_notify = eax & (1 << 8);
+ has_hwp_activity_window = eax & (1 << 9);
+ has_hwp_epp = eax & (1 << 10);
+ has_hwp_request_pkg = eax & (1 << 11);
+
+ if (!has_hwp_request_pkg && update_hwp_use_pkg)
+ errx(1, "--hwp-use-pkg is not available on this hardware");
+
+ /* has_epb already set */
+
+ if (debug)
+ fprintf(stderr,
+ "CPUID(6): %sTURBO, %sHWP, %sHWPnotify, %sHWPwindow, %sHWPepp, %sHWPpkg, %sEPB\n",
+ turbo_is_enabled ? "" : "No-",
+ has_hwp ? "" : "No-",
+ has_hwp_notify ? "" : "No-",
+ has_hwp_activity_window ? "" : "No-",
+ has_hwp_epp ? "" : "No-",
+ has_hwp_request_pkg ? "" : "No-",
+ has_epb ? "" : "No-");
+
+ return; /* success */
+}
+
+int main(int argc, char **argv)
+{
+ set_base_cpu();
+ probe_dev_msr();
+ init_data_structures();
+
+ early_cpuid(); /* initial cpuid parse before cmdline */
+
+ cmdline(argc, argv);
+
+ if (debug)
+ print_version();
+
+ parse_cpuid();
+
+ /* If CPU-set and PKG-set are not initialized, default to all CPUs */
+ if ((cpu_selected_set == 0) && (pkg_selected_set == 0))
+ cpu_selected_set = cpu_present_set;
+
+ /*
+ * If HWP is being enabled, do it now, so that subsequent operations
+ * that access HWP registers can work.
+ */
+ if (update_hwp_enable)
+ for_all_cpus_in_set(cpu_setsize, cpu_selected_set, enable_hwp_on_cpu);
+
+ /* If HWP present, but disabled, warn and ignore from here forward */
+ verify_hwp_is_enabled();
+
+ if (req_update_bounds_check())
+ return -EINVAL;
+
+ /* display information only, no updates to settings */
+ if (!update_epb && !update_turbo && !hwp_update_enabled()) {
+ if (cpu_selected_set)
+ for_all_cpus_in_set(cpu_setsize, cpu_selected_set, print_cpu_msrs);
+
+ if (has_hwp_request_pkg) {
+ if (pkg_selected_set == 0)
+ pkg_selected_set = pkg_present_set;
+
+ for_packages(pkg_selected_set, print_pkg_msrs);
+ }
+
+ return 0;
+ }
+
+ /* update CPU set */
+ if (cpu_selected_set) {
+ for_all_cpus_in_set(cpu_setsize, cpu_selected_set, update_sysfs);
+ for_all_cpus_in_set(cpu_setsize, cpu_selected_set, update_cpu_msrs);
+ } else if (pkg_selected_set)
+ for_packages(pkg_selected_set, update_hwp_request_pkg);
+
+ return 0;
+}
--
2.11.0.161.g6610af872
^ permalink raw reply related [flat|nested] 6+ messages in thread