All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pablo Neira Ayuso <pablo@netfilter.org>
To: Florian Westphal <fw@strlen.de>
Cc: netfilter-devel@vger.kernel.org
Subject: Re: [PATCH nft 07/10] tests: add ip reject with tcp and check for mark too
Date: Tue, 16 May 2017 12:29:35 +0200	[thread overview]
Message-ID: <20170516102935.GC19858@salvia> (raw)
In-Reply-To: <20170509155122.26356-8-fw@strlen.de>

On Tue, May 09, 2017 at 05:51:19PM +0200, Florian Westphal wrote:
> ... to avoid resetting e.g. the ssh session to the vm that runs
> nft-test.py.

Oh, this is breaking your testbed, right? OK, that's fine.

> Signed-off-by: Florian Westphal <fw@strlen.de>
> ---
>  tests/py/bridge/reject.t            | 2 +-
>  tests/py/bridge/reject.t.payload    | 4 +++-
>  tests/py/inet/reject.t              | 2 +-
>  tests/py/inet/reject.t.payload.inet | 4 +++-
>  tests/py/ip/reject.t                | 1 +
>  tests/py/ip/reject.t.payload        | 8 ++++++++
>  tests/py/ip6/reject.t               | 2 +-
>  tests/py/ip6/reject.t.payload.ip6   | 4 +++-
>  8 files changed, 21 insertions(+), 6 deletions(-)
> 
> diff --git a/tests/py/bridge/reject.t b/tests/py/bridge/reject.t
> index 4fa6ac0b3278..67deac8d3b5e 100644
> --- a/tests/py/bridge/reject.t
> +++ b/tests/py/bridge/reject.t
> @@ -16,7 +16,7 @@ reject with icmpv6 type admin-prohibited;ok;ether type ip6 reject with icmpv6 ty
>  reject with icmpv6 type addr-unreachable;ok;ether type ip6 reject with icmpv6 type addr-unreachable
>  reject with icmpv6 type port-unreachable;ok;ether type ip6 reject
>  
> -ip protocol tcp reject with tcp reset;ok;ip protocol 6 reject with tcp reset
> +mark 12345 ip protocol tcp reject with tcp reset;ok;mark 0x00003039 ip protocol 6 reject with tcp reset
>  
>  reject;ok
>  ether type ip reject;ok
> diff --git a/tests/py/bridge/reject.t.payload b/tests/py/bridge/reject.t.payload
> index f5a0e6a82963..b984f6f8de4d 100644
> --- a/tests/py/bridge/reject.t.payload
> +++ b/tests/py/bridge/reject.t.payload
> @@ -64,8 +64,10 @@ bridge test-bridge input
>    [ cmp eq reg 1 0x0000dd86 ]
>    [ reject type 0 code 4 ]
>  
> -# ip protocol tcp reject with tcp reset
> +# mark 12345 ip protocol tcp reject with tcp reset
>  bridge test-bridge input
> +  [ meta load mark => reg 1 ]
> +  [ cmp eq reg 1 0x00003039 ]
>    [ payload load 2b @ link header + 12 => reg 1 ]
>    [ cmp eq reg 1 0x00000008 ]
>    [ payload load 1b @ network header + 9 => reg 1 ]
> diff --git a/tests/py/inet/reject.t b/tests/py/inet/reject.t
> index 638f329cf4d5..7679407e6f8d 100644
> --- a/tests/py/inet/reject.t
> +++ b/tests/py/inet/reject.t
> @@ -16,7 +16,7 @@ reject with icmpv6 type admin-prohibited;ok;meta nfproto ipv6 reject with icmpv6
>  reject with icmpv6 type addr-unreachable;ok;meta nfproto ipv6 reject with icmpv6 type addr-unreachable
>  reject with icmpv6 type port-unreachable;ok;meta nfproto ipv6 reject
>  
> -reject with tcp reset;ok;meta l4proto 6 reject with tcp reset
> +mark 12345 reject with tcp reset;ok;meta l4proto 6 mark 0x00003039 reject with tcp reset
>  
>  reject;ok
>  meta nfproto ipv4 reject;ok
> diff --git a/tests/py/inet/reject.t.payload.inet b/tests/py/inet/reject.t.payload.inet
> index 5770330d9072..7a6468e81f9e 100644
> --- a/tests/py/inet/reject.t.payload.inet
> +++ b/tests/py/inet/reject.t.payload.inet
> @@ -64,10 +64,12 @@ inet test-inet input
>    [ cmp eq reg 1 0x0000000a ]
>    [ reject type 0 code 4 ]
>  
> -# reject with tcp reset
> +# mark 12345 reject with tcp reset
>  inet test-inet input
>    [ meta load l4proto => reg 1 ]
>    [ cmp eq reg 1 0x00000006 ]
> +  [ meta load mark => reg 1 ]
> +  [ cmp eq reg 1 0x00003039 ]
>    [ reject type 1 code 0 ]
>  
>  # reject
> diff --git a/tests/py/ip/reject.t b/tests/py/ip/reject.t
> index 6006f0541cb8..7befe697fa23 100644
> --- a/tests/py/ip/reject.t
> +++ b/tests/py/ip/reject.t
> @@ -10,6 +10,7 @@ reject with icmp type port-unreachable;ok;reject
>  reject with icmp type net-prohibited;ok
>  reject with icmp type host-prohibited;ok
>  reject with icmp type admin-prohibited;ok
> +mark 0x80000000 reject with tcp reset;ok
>  
>  reject with icmp type no-route;fail
>  reject with icmpv6 type no-route;fail
> diff --git a/tests/py/ip/reject.t.payload b/tests/py/ip/reject.t.payload
> index d5e87665ebc5..ec94b4c1a1c5 100644
> --- a/tests/py/ip/reject.t.payload
> +++ b/tests/py/ip/reject.t.payload
> @@ -30,3 +30,11 @@ ip test-ip4 output
>  ip test-ip4 output
>    [ reject type 0 code 13 ]
>  
> +# mark 0x80000000 reject with tcp reset
> +ip test-ip4 output
> +  [ payload load 1b @ network header + 9 => reg 1 ]
> +  [ cmp eq reg 1 0x00000006 ]
> +  [ meta load mark => reg 1 ]
> +  [ cmp eq reg 1 0x80000000 ]
> +  [ reject type 1 code 0 ]
> +
> diff --git a/tests/py/ip6/reject.t b/tests/py/ip6/reject.t
> index de09fd978418..a95f2e3fe14a 100644
> --- a/tests/py/ip6/reject.t
> +++ b/tests/py/ip6/reject.t
> @@ -9,7 +9,7 @@ reject with icmpv6 type addr-unreachable;ok
>  reject with icmpv6 type port-unreachable;ok;reject
>  reject with icmpv6 type policy-fail;ok
>  reject with icmpv6 type reject-route;ok
> -reject with tcp reset;ok
> +mark 0x80000000 reject with tcp reset;ok
>  
>  reject with icmpv6 type host-unreachable;fail
>  reject with icmp type host-unreachable;fail
> diff --git a/tests/py/ip6/reject.t.payload.ip6 b/tests/py/ip6/reject.t.payload.ip6
> index 0ba5f7ee5bfd..dd4491ae47a8 100644
> --- a/tests/py/ip6/reject.t.payload.ip6
> +++ b/tests/py/ip6/reject.t.payload.ip6
> @@ -26,9 +26,11 @@ ip6 test-ip6 output
>  ip6 test-ip6 output
>    [ reject type 0 code 6 ]
>  
> -# reject with tcp reset
> +# mark 0x80000000 reject with tcp reset
>  ip6 test-ip6 output
>    [ meta load l4proto => reg 1 ]
>    [ cmp eq reg 1 0x00000006 ]
> +  [ meta load mark => reg 1 ]
> +  [ cmp eq reg 1 0x80000000 ]
>    [ reject type 1 code 0 ]
>  
> -- 
> 2.10.2
> 
> --
> To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2017-05-16 10:29 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-09 15:51 [PATCH nft 00/10] switch l4 dependency to meta l4proto Florian Westphal
2017-05-09 15:51 ` [PATCH nft 01/10] src: allow update of net base w. meta l4proto icmpv6 Florian Westphal
2017-05-16 10:04   ` Pablo Neira Ayuso
2017-05-09 15:51 ` [PATCH nft 02/10] src: ipv6: switch implicit dependencies to meta l4proto Florian Westphal
2017-05-16 10:05   ` Pablo Neira Ayuso
2017-05-09 15:51 ` [PATCH nft 03/10] src: treat ip6 nexthdr as a protocol Florian Westphal
2017-05-16 10:28   ` Pablo Neira Ayuso
2017-05-09 15:51 ` [PATCH nft 04/10] tests: fix up meta l4proto change for ip6 family Florian Westphal
2017-05-16 10:22   ` Pablo Neira Ayuso
2017-05-16 10:52     ` Florian Westphal
2017-05-17 18:13       ` Pablo Neira Ayuso
2017-05-17 18:36         ` Florian Westphal
2017-05-17 18:49           ` Pablo Neira Ayuso
2017-05-17 20:55             ` Florian Westphal
2017-05-09 15:51 ` [PATCH nft 05/10] tests: meta: add icmpv6 test case Florian Westphal
2017-05-09 15:51 ` [PATCH nft 06/10] netlink_delinearize: reject: remove dependency for tcp-resets Florian Westphal
2017-05-09 15:51 ` [PATCH nft 07/10] tests: add ip reject with tcp and check for mark too Florian Westphal
2017-05-16 10:29   ` Pablo Neira Ayuso [this message]
2017-05-16 10:40     ` Florian Westphal
2017-05-09 15:51 ` [PATCH nft 08/10] src: add a comment wrt. reject dependency insertion Florian Westphal
2017-05-09 15:51 ` [PATCH nft 09/10] src: ip: switch implicit dependencies to meta l4proto too Florian Westphal
2017-05-16 10:35   ` Pablo Neira Ayuso
2017-05-09 15:51 ` [PATCH nft 10/10] tests: fix up meta l4proto change for ip family Florian Westphal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170516102935.GC19858@salvia \
    --to=pablo@netfilter.org \
    --cc=fw@strlen.de \
    --cc=netfilter-devel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.