[PATCHv2 0/3] Make ohci-platform usable for omap3/4/5

[PATCHv2 0/3] Make ohci-platform usable for omap3/4/5

[Tony Lindgren]

Hi,

Here's v2 of this series.

Regards,

Tony

Changes since v1:

- Update runtime PM support for ohci based on Alan's comments and
  more testing

- Just remove ohci-omap3 as it needs LS/FS USB PHY not available
  on most hardware

Tony Lindgren (3):
  usb: host: ohci-platform: Add basic runtime PM support
  usb: host: ohci-platform: Add support for omap3 and later
  usb: host: ohci-omap3: Remove driver in favor of ohci-platform

 Documentation/devicetree/bindings/usb/usb-ohci.txt |   1 +
 drivers/usb/host/Kconfig                           |   6 +-
 drivers/usb/host/Makefile                          |   1 -
 drivers/usb/host/ohci-omap3.c                      | 211 ---------------------
 drivers/usb/host/ohci-platform.c                   |  22 ++-
 5 files changed, 27 insertions(+), 214 deletions(-)
 delete mode 100644 drivers/usb/host/ohci-omap3.c

-- 
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/3] usb: host: ohci-platform: Add basic runtime PM support

[Tony Lindgren]

This is needed in preparation of adding support for omap3 and
later OHCI. The runtime PM will only do something on platforms
that implement it.

Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
Cc: Sebastian Reichel <sebastian.reichel-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---

Alan, do you have some better ideas for the ohci_platform_remove()
path below?

---
 drivers/usb/host/ohci-platform.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -24,6 +24,7 @@
 #include <linux/err.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/usb/ohci_pdriver.h>
 #include <linux/usb.h>
@@ -242,6 +243,8 @@ static int ohci_platform_probe(struct platform_device *dev)
 	}
 #endif
 
+	pm_runtime_set_active(&dev->dev);
+	pm_runtime_enable(&dev->dev);
 	if (pdata->power_on) {
 		err = pdata->power_on(dev);
 		if (err < 0)
@@ -271,6 +274,7 @@ static int ohci_platform_probe(struct platform_device *dev)
 	if (pdata->power_off)
 		pdata->power_off(dev);
 err_reset:
+	pm_runtime_disable(&dev->dev);
 	while (--rst >= 0)
 		reset_control_assert(priv->resets[rst]);
 err_put_clks:
@@ -290,7 +294,14 @@ static int ohci_platform_remove(struct platform_device *dev)
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
-	int clk, rst;
+	int clk, rst, enabled;
+
+	enabled = pm_runtime_get_sync(&dev->dev);
+	if (enabled < 0) {
+		dev_warn(&dev->dev, "pm_runtime_get failed: %i\n",
+			 enabled);
+		pm_runtime_put_noidle(&dev->dev);
+	}
 
 	usb_remove_hcd(hcd);
 
@@ -305,6 +316,10 @@ static int ohci_platform_remove(struct platform_device *dev)
 
 	usb_put_hcd(hcd);
 
+	if (enabled >= 0)
+		pm_runtime_put_sync(&dev->dev);
+	pm_runtime_disable(&dev->dev);
+
 	if (pdata == &ohci_platform_defaults)
 		dev->dev.platform_data = NULL;
 
-- 
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/3] usb: host: ohci-platform: Add basic runtime PM support

[Roger Quadros]

Hi,

On 22/05/17 19:00, Tony Lindgren wrote:
> This is needed in preparation of adding support for omap3 and
> later OHCI. The runtime PM will only do something on platforms
> that implement it.
> 
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> Cc: Sebastian Reichel <sebastian.reichel-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> ---
> 
> Alan, do you have some better ideas for the ohci_platform_remove()
> path below?
> 
> ---
>  drivers/usb/host/ohci-platform.c | 17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
> --- a/drivers/usb/host/ohci-platform.c
> +++ b/drivers/usb/host/ohci-platform.c
> @@ -24,6 +24,7 @@
>  #include <linux/err.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/reset.h>
>  #include <linux/usb/ohci_pdriver.h>
>  #include <linux/usb.h>
> @@ -242,6 +243,8 @@ static int ohci_platform_probe(struct platform_device *dev)
>  	}
>  #endif
>  
> +	pm_runtime_set_active(&dev->dev);
> +	pm_runtime_enable(&dev->dev);
>  	if (pdata->power_on) {
>  		err = pdata->power_on(dev);
>  		if (err < 0)
> @@ -271,6 +274,7 @@ static int ohci_platform_probe(struct platform_device *dev)
>  	if (pdata->power_off)
>  		pdata->power_off(dev);
>  err_reset:
> +	pm_runtime_disable(&dev->dev);
>  	while (--rst >= 0)
>  		reset_control_assert(priv->resets[rst]);
>  err_put_clks:
> @@ -290,7 +294,14 @@ static int ohci_platform_remove(struct platform_device *dev)
>  	struct usb_hcd *hcd = platform_get_drvdata(dev);
>  	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
>  	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
> -	int clk, rst;
> +	int clk, rst, enabled;
> +
> +	enabled = pm_runtime_get_sync(&dev->dev);

Why do we need to pm_runtime_get_sync() here?

> +	if (enabled < 0) {
> +		dev_warn(&dev->dev, "pm_runtime_get failed: %i\n",
> +			 enabled);
> +		pm_runtime_put_noidle(&dev->dev);
> +	}
>  
>  	usb_remove_hcd(hcd);
>  
> @@ -305,6 +316,10 @@ static int ohci_platform_remove(struct platform_device *dev)
>  
>  	usb_put_hcd(hcd);
>  
> +	if (enabled >= 0)
> +		pm_runtime_put_sync(&dev->dev);
> +	pm_runtime_disable(&dev->dev);
> +
>  	if (pdata == &ohci_platform_defaults)
>  		dev->dev.platform_data = NULL;
>  
> 

-- 
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/3] usb: host: ohci-platform: Add basic runtime PM support

[Tony Lindgren]

* Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org> [170523 00:14]:
> On 22/05/17 19:00, Tony Lindgren wrote:
> > --- a/drivers/usb/host/ohci-platform.c
> > +++ b/drivers/usb/host/ohci-platform.c
> > @@ -290,7 +294,14 @@ static int ohci_platform_remove(struct platform_device *dev)
> >  	struct usb_hcd *hcd = platform_get_drvdata(dev);
> >  	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
> >  	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
> > -	int clk, rst;
> > +	int clk, rst, enabled;
> > +
> > +	enabled = pm_runtime_get_sync(&dev->dev);
> 
> Why do we need to pm_runtime_get_sync() here?

ohci_platform_remove()
	usb_remove_hcd()
		ohci_stop()

Will cause "external abort on non-linefetch" otherwise.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/3] usb: host: ohci-platform: Add basic runtime PM support

[Roger Quadros]

On 23/05/17 17:08, Tony Lindgren wrote:
> * Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org> [170523 00:14]:
>> On 22/05/17 19:00, Tony Lindgren wrote:
>>> --- a/drivers/usb/host/ohci-platform.c
>>> +++ b/drivers/usb/host/ohci-platform.c
>>> @@ -290,7 +294,14 @@ static int ohci_platform_remove(struct platform_device *dev)
>>>  	struct usb_hcd *hcd = platform_get_drvdata(dev);
>>>  	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
>>>  	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
>>> -	int clk, rst;
>>> +	int clk, rst, enabled;
>>> +
>>> +	enabled = pm_runtime_get_sync(&dev->dev);
>>
>> Why do we need to pm_runtime_get_sync() here?
> 
> ohci_platform_remove()
> 	usb_remove_hcd()
> 		ohci_stop()
> 
> Will cause "external abort on non-linefetch" otherwise.

Got it, thanks.

> 
> Regards,
> 
> Tony
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/3] usb: host: ohci-platform: Add basic runtime PM support

[Alan Stern]

On Mon, 22 May 2017, Tony Lindgren wrote:

> This is needed in preparation of adding support for omap3 and
> later OHCI. The runtime PM will only do something on platforms
> that implement it.
> 
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> Cc: Sebastian Reichel <sebastian.reichel-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> ---
> 
> Alan, do you have some better ideas for the ohci_platform_remove()
> path below?
> 
> ---
>  drivers/usb/host/ohci-platform.c | 17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
> --- a/drivers/usb/host/ohci-platform.c
> +++ b/drivers/usb/host/ohci-platform.c
> @@ -24,6 +24,7 @@
>  #include <linux/err.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/reset.h>
>  #include <linux/usb/ohci_pdriver.h>
>  #include <linux/usb.h>
> @@ -242,6 +243,8 @@ static int ohci_platform_probe(struct platform_device *dev)
>  	}
>  #endif
>  
> +	pm_runtime_set_active(&dev->dev);
> +	pm_runtime_enable(&dev->dev);
>  	if (pdata->power_on) {
>  		err = pdata->power_on(dev);
>  		if (err < 0)
> @@ -271,6 +274,7 @@ static int ohci_platform_probe(struct platform_device *dev)
>  	if (pdata->power_off)
>  		pdata->power_off(dev);
>  err_reset:
> +	pm_runtime_disable(&dev->dev);
>  	while (--rst >= 0)
>  		reset_control_assert(priv->resets[rst]);
>  err_put_clks:
> @@ -290,7 +294,14 @@ static int ohci_platform_remove(struct platform_device *dev)
>  	struct usb_hcd *hcd = platform_get_drvdata(dev);
>  	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
>  	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
> -	int clk, rst;
> +	int clk, rst, enabled;
> +
> +	enabled = pm_runtime_get_sync(&dev->dev);
> +	if (enabled < 0) {
> +		dev_warn(&dev->dev, "pm_runtime_get failed: %i\n",
> +			 enabled);
> +		pm_runtime_put_noidle(&dev->dev);
> +	}

I wouldn't worry about checking the return value.  There's no 
particular reason for this call to fail, is there?

>  
>  	usb_remove_hcd(hcd);
>  
> @@ -305,6 +316,10 @@ static int ohci_platform_remove(struct platform_device *dev)
>  
>  	usb_put_hcd(hcd);
>  
> +	if (enabled >= 0)
> +		pm_runtime_put_sync(&dev->dev);
> +	pm_runtime_disable(&dev->dev);

And here you could just do the put_sync, with no test.  If the get_sync
failed then this will probably fail too, but you won't be any worse off
for the attempt.

Alan Stern

> +
>  	if (pdata == &ohci_platform_defaults)
>  		dev->dev.platform_data = NULL;

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/3] usb: host: ohci-platform: Add basic runtime PM support

[Tony Lindgren]

* Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org> [170523 09:57]:
> On Mon, 22 May 2017, Tony Lindgren wrote:
> > Alan, do you have some better ideas for the ohci_platform_remove()
> > path below?
...
> > --- a/drivers/usb/host/ohci-platform.c
> > +++ b/drivers/usb/host/ohci-platform.c
> > @@ -290,7 +294,14 @@ static int ohci_platform_remove(struct platform_device *dev)
> >  	struct usb_hcd *hcd = platform_get_drvdata(dev);
> >  	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
> >  	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
> > -	int clk, rst;
> > +	int clk, rst, enabled;
> > +
> > +	enabled = pm_runtime_get_sync(&dev->dev);
> > +	if (enabled < 0) {
> > +		dev_warn(&dev->dev, "pm_runtime_get failed: %i\n",
> > +			 enabled);
> > +		pm_runtime_put_noidle(&dev->dev);
> > +	}
> 
> I wouldn't worry about checking the return value.  There's no 
> particular reason for this call to fail, is there?

OK yeah if it was to fail it would already fail on probe
already :)

> >  	usb_remove_hcd(hcd);
> >  
> > @@ -305,6 +316,10 @@ static int ohci_platform_remove(struct platform_device *dev)
> >  
> >  	usb_put_hcd(hcd);
> >  
> > +	if (enabled >= 0)
> > +		pm_runtime_put_sync(&dev->dev);
> > +	pm_runtime_disable(&dev->dev);
> 
> And here you could just do the put_sync, with no test.  If the get_sync
> failed then this will probably fail too, but you won't be any worse off
> for the attempt.

OK fine with me.

Thanks,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/3] usb: host: ohci-platform: Add support for omap3 and later

[Tony Lindgren]

With the runtime PM implemented for ohci-platform driver, we can
now support omap3 and later OHCI by adding one device tree
property.

Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Cc: Sebastian Reichel <sebastian.reichel-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
Acked-by: Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>
Acked-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 Documentation/devicetree/bindings/usb/usb-ohci.txt | 1 +
 drivers/usb/host/ohci-platform.c                   | 5 +++++
 2 files changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
--- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -10,6 +10,7 @@ Optional properties:
 - big-endian-desc : boolean, set this for hcds with big-endian descriptors
 - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
 - no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
+- remote-wakeup-connected: remote wakeup is wired on the platform
 - num-ports : u32, to override the detected port count
 - clocks : a list of phandle + clock specifier pairs
 - phys : phandle + phy specifier pair
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -164,6 +164,10 @@ static int ohci_platform_probe(struct platform_device *dev)
 		if (of_property_read_bool(dev->dev.of_node, "no-big-frame-no"))
 			ohci->flags |= OHCI_QUIRK_FRAME_NO;
 
+		if (of_property_read_bool(dev->dev.of_node,
+					  "remote-wakeup-connected"))
+			ohci->hc_control = OHCI_CTRL_RWC;
+
 		of_property_read_u32(dev->dev.of_node, "num-ports",
 				     &ohci->num_ports);
 
@@ -365,6 +369,7 @@ static int ohci_platform_resume(struct device *dev)
 static const struct of_device_id ohci_platform_ids[] = {
 	{ .compatible = "generic-ohci", },
 	{ .compatible = "cavium,octeon-6335-ohci", },
+	{ .compatible = "ti,ohci-omap3", },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ohci_platform_ids);
-- 
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/3] usb: host: ohci-platform: Add support for omap3 and later

[Tony Lindgren]

* Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> [170522 09:03]:
> With the runtime PM implemented for ohci-platform driver, we can
> now support omap3 and later OHCI by adding one device tree
> property.

And the related dts patch from v1 series I can queue separately when
people are happy with the driver changes.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 3/3] usb: host: ohci-omap3: Remove driver in favor of ohci-platform

[Tony Lindgren]

This driver is no longer needed and can be removed. The reason why
it's safe to remove this driver is that most omap devices don't have a
USB low-speed or full-speed compatible PHY installed and configured
with drivers/mfd/omap-usb-host.c. This means that devices like
beagleboard and pandaboard need to use a high-speed USB hub in order
to use devices like keyboard and mice.

Currently the only known configured for a full-speed PHY is the
mdm6600 modem on droid 4 and I've verified it works just fine with
ohci-platform.

Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
Cc: Sebastian Reichel <sebastian.reichel-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 drivers/usb/host/Kconfig      |   6 +-
 drivers/usb/host/Makefile     |   1 -
 drivers/usb/host/ohci-omap3.c | 211 ------------------------------------------
 3 files changed, 5 insertions(+), 213 deletions(-)
 delete mode 100644 drivers/usb/host/ohci-omap3.c

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -473,8 +473,12 @@ config USB_OHCI_HCD_AT91
 config USB_OHCI_HCD_OMAP3
 	tristate "OHCI support for OMAP3 and later chips"
 	depends on (ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5)
+	select USB_OHCI_HCD_PLATFORM
 	default y
-	---help---
+	help
+	  This option is deprecated now and the driver was removed, use
+	  USB_OHCI_HCD_PLATFORM instead.
+
 	  Enables support for the on-chip OHCI controller on
 	  OMAP3 and later chips.
 
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -52,7 +52,6 @@ obj-$(CONFIG_USB_OHCI_HCD_PCI)	+= ohci-pci.o
 obj-$(CONFIG_USB_OHCI_HCD_PLATFORM)	+= ohci-platform.o
 obj-$(CONFIG_USB_OHCI_EXYNOS)	+= ohci-exynos.o
 obj-$(CONFIG_USB_OHCI_HCD_OMAP1)	+= ohci-omap.o
-obj-$(CONFIG_USB_OHCI_HCD_OMAP3)	+= ohci-omap3.o
 obj-$(CONFIG_USB_OHCI_HCD_SPEAR)	+= ohci-spear.o
 obj-$(CONFIG_USB_OHCI_HCD_STI)	+= ohci-st.o
 obj-$(CONFIG_USB_OHCI_HCD_AT91)	+= ohci-at91.o
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
deleted file mode 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * ohci-omap3.c - driver for OHCI on OMAP3 and later processors
- *
- * Bus Glue for OMAP3 USBHOST 3 port OHCI controller
- * This controller is also used in later OMAPs and AM35x chips
- *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
- * Author: Vikram Pandita <vikram.pandita-l0cyMroinI0@public.gmane.org>
- * Author: Anand Gadiyar <gadiyar-l0cyMroinI0@public.gmane.org>
- * Author: Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org>
- *
- * Based on ehci-omap.c and some other ohci glue layers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- * TODO (last updated Feb 27, 2011):
- *	- add kernel-doc
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/usb/otg.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/usb.h>
-#include <linux/usb/hcd.h>
-
-#include "ohci.h"
-
-#define DRIVER_DESC "OHCI OMAP3 driver"
-
-static const char hcd_name[] = "ohci-omap3";
-static struct hc_driver __read_mostly ohci_omap3_hc_driver;
-
-/*
- * configure so an HC device and id are always provided
- * always called with process context; sleeping is OK
- */
-
-/**
- * ohci_hcd_omap3_probe - initialize OMAP-based HCDs
- *
- * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- */
-static int ohci_hcd_omap3_probe(struct platform_device *pdev)
-{
-	struct device		*dev = &pdev->dev;
-	struct ohci_hcd		*ohci;
-	struct usb_hcd		*hcd = NULL;
-	void __iomem		*regs = NULL;
-	struct resource		*res;
-	int			ret;
-	int			irq;
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	if (!dev->parent) {
-		dev_err(dev, "Missing parent device\n");
-		return -ENODEV;
-	}
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(dev, "OHCI irq failed\n");
-		return -ENODEV;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "UHH OHCI get resource failed\n");
-		return -ENOMEM;
-	}
-
-	regs = ioremap(res->start, resource_size(res));
-	if (!regs) {
-		dev_err(dev, "UHH OHCI ioremap failed\n");
-		return -ENOMEM;
-	}
-
-	/*
-	 * Right now device-tree probed devices don't get dma_mask set.
-	 * Since shared usb code relies on it, set it here for now.
-	 * Once we have dma capability bindings this can go away.
-	 */
-	ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
-	if (ret)
-		goto err_io;
-
-	ret = -ENODEV;
-	hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev,
-			dev_name(dev));
-	if (!hcd) {
-		dev_err(dev, "usb_create_hcd failed\n");
-		goto err_io;
-	}
-
-	hcd->rsrc_start = res->start;
-	hcd->rsrc_len = resource_size(res);
-	hcd->regs =  regs;
-
-	pm_runtime_enable(dev);
-	pm_runtime_get_sync(dev);
-
-	ohci = hcd_to_ohci(hcd);
-	/*
-	 * RemoteWakeupConnected has to be set explicitly before
-	 * calling ohci_run. The reset value of RWC is 0.
-	 */
-	ohci->hc_control = OHCI_CTRL_RWC;
-
-	ret = usb_add_hcd(hcd, irq, 0);
-	if (ret) {
-		dev_dbg(dev, "failed to add hcd with err %d\n", ret);
-		goto err_add_hcd;
-	}
-	device_wakeup_enable(hcd->self.controller);
-
-	return 0;
-
-err_add_hcd:
-	pm_runtime_put_sync(dev);
-	usb_put_hcd(hcd);
-
-err_io:
-	iounmap(regs);
-
-	return ret;
-}
-
-/*
- * may be called without controller electrically present
- * may be called with controller, bus, and devices active
- */
-
-/**
- * ohci_hcd_omap3_remove - shutdown processing for OHCI HCDs
- * @pdev: USB Host Controller being removed
- *
- * Reverses the effect of ohci_hcd_omap3_probe(), first invoking
- * the HCD's stop() method.  It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
- */
-static int ohci_hcd_omap3_remove(struct platform_device *pdev)
-{
-	struct device *dev	= &pdev->dev;
-	struct usb_hcd *hcd	= dev_get_drvdata(dev);
-
-	iounmap(hcd->regs);
-	usb_remove_hcd(hcd);
-	pm_runtime_put_sync(dev);
-	pm_runtime_disable(dev);
-	usb_put_hcd(hcd);
-	return 0;
-}
-
-static const struct of_device_id omap_ohci_dt_ids[] = {
-	{ .compatible = "ti,ohci-omap3" },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(of, omap_ohci_dt_ids);
-
-static struct platform_driver ohci_hcd_omap3_driver = {
-	.probe		= ohci_hcd_omap3_probe,
-	.remove		= ohci_hcd_omap3_remove,
-	.shutdown	= usb_hcd_platform_shutdown,
-	.driver		= {
-		.name	= "ohci-omap3",
-		.of_match_table = omap_ohci_dt_ids,
-	},
-};
-
-static int __init ohci_omap3_init(void)
-{
-	if (usb_disabled())
-		return -ENODEV;
-
-	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
-	ohci_init_driver(&ohci_omap3_hc_driver, NULL);
-	return platform_driver_register(&ohci_hcd_omap3_driver);
-}
-module_init(ohci_omap3_init);
-
-static void __exit ohci_omap3_cleanup(void)
-{
-	platform_driver_unregister(&ohci_hcd_omap3_driver);
-}
-module_exit(ohci_omap3_cleanup);

Re: [PATCH 3/3] usb: host: ohci-omap3: Remove driver in favor of ohci-platform

[Roger Quadros]

On 22/05/17 19:00, Tony Lindgren wrote:
> This driver is no longer needed and can be removed. The reason why
> it's safe to remove this driver is that most omap devices don't have a
> USB low-speed or full-speed compatible PHY installed and configured
> with drivers/mfd/omap-usb-host.c. This means that devices like
> beagleboard and pandaboard need to use a high-speed USB hub in order
> to use devices like keyboard and mice.
> 
> Currently the only known configured for a full-speed PHY is the
> mdm6600 modem on droid 4 and I've verified it works just fine with
> ohci-platform.
> 
> Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> Cc: Sebastian Reichel <sebastian.reichel-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>

Acked-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>

> ---
>  drivers/usb/host/Kconfig      |   6 +-
>  drivers/usb/host/Makefile     |   1 -
>  drivers/usb/host/ohci-omap3.c | 211 ------------------------------------------
>  3 files changed, 5 insertions(+), 213 deletions(-)
>  delete mode 100644 drivers/usb/host/ohci-omap3.c
> 
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -473,8 +473,12 @@ config USB_OHCI_HCD_AT91
>  config USB_OHCI_HCD_OMAP3
>  	tristate "OHCI support for OMAP3 and later chips"
>  	depends on (ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5)
> +	select USB_OHCI_HCD_PLATFORM
>  	default y
> -	---help---
> +	help
> +	  This option is deprecated now and the driver was removed, use
> +	  USB_OHCI_HCD_PLATFORM instead.
> +
>  	  Enables support for the on-chip OHCI controller on
>  	  OMAP3 and later chips.
>  
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -52,7 +52,6 @@ obj-$(CONFIG_USB_OHCI_HCD_PCI)	+= ohci-pci.o
>  obj-$(CONFIG_USB_OHCI_HCD_PLATFORM)	+= ohci-platform.o
>  obj-$(CONFIG_USB_OHCI_EXYNOS)	+= ohci-exynos.o
>  obj-$(CONFIG_USB_OHCI_HCD_OMAP1)	+= ohci-omap.o
> -obj-$(CONFIG_USB_OHCI_HCD_OMAP3)	+= ohci-omap3.o
>  obj-$(CONFIG_USB_OHCI_HCD_SPEAR)	+= ohci-spear.o
>  obj-$(CONFIG_USB_OHCI_HCD_STI)	+= ohci-st.o
>  obj-$(CONFIG_USB_OHCI_HCD_AT91)	+= ohci-at91.o
> diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
> deleted file mode 100644
> --- a/drivers/usb/host/ohci-omap3.c
> +++ /dev/null
> @@ -1,211 +0,0 @@
> -/*
> - * ohci-omap3.c - driver for OHCI on OMAP3 and later processors
> - *
> - * Bus Glue for OMAP3 USBHOST 3 port OHCI controller
> - * This controller is also used in later OMAPs and AM35x chips
> - *
> - * Copyright (C) 2007-2010 Texas Instruments, Inc.
> - * Author: Vikram Pandita <vikram.pandita-l0cyMroinI0@public.gmane.org>
> - * Author: Anand Gadiyar <gadiyar-l0cyMroinI0@public.gmane.org>
> - * Author: Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org>
> - *
> - * Based on ehci-omap.c and some other ohci glue layers
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
> - *
> - * TODO (last updated Feb 27, 2011):
> - *	- add kernel-doc
> - */
> -
> -#include <linux/dma-mapping.h>
> -#include <linux/kernel.h>
> -#include <linux/module.h>
> -#include <linux/of.h>
> -#include <linux/usb/otg.h>
> -#include <linux/platform_device.h>
> -#include <linux/pm_runtime.h>
> -#include <linux/usb.h>
> -#include <linux/usb/hcd.h>
> -
> -#include "ohci.h"
> -
> -#define DRIVER_DESC "OHCI OMAP3 driver"
> -
> -static const char hcd_name[] = "ohci-omap3";
> -static struct hc_driver __read_mostly ohci_omap3_hc_driver;
> -
> -/*
> - * configure so an HC device and id are always provided
> - * always called with process context; sleeping is OK
> - */
> -
> -/**
> - * ohci_hcd_omap3_probe - initialize OMAP-based HCDs
> - *
> - * Allocates basic resources for this USB host controller, and
> - * then invokes the start() method for the HCD associated with it
> - * through the hotplug entry's driver_data.
> - */
> -static int ohci_hcd_omap3_probe(struct platform_device *pdev)
> -{
> -	struct device		*dev = &pdev->dev;
> -	struct ohci_hcd		*ohci;
> -	struct usb_hcd		*hcd = NULL;
> -	void __iomem		*regs = NULL;
> -	struct resource		*res;
> -	int			ret;
> -	int			irq;
> -
> -	if (usb_disabled())
> -		return -ENODEV;
> -
> -	if (!dev->parent) {
> -		dev_err(dev, "Missing parent device\n");
> -		return -ENODEV;
> -	}
> -
> -	irq = platform_get_irq(pdev, 0);
> -	if (irq < 0) {
> -		dev_err(dev, "OHCI irq failed\n");
> -		return -ENODEV;
> -	}
> -
> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	if (!res) {
> -		dev_err(dev, "UHH OHCI get resource failed\n");
> -		return -ENOMEM;
> -	}
> -
> -	regs = ioremap(res->start, resource_size(res));
> -	if (!regs) {
> -		dev_err(dev, "UHH OHCI ioremap failed\n");
> -		return -ENOMEM;
> -	}
> -
> -	/*
> -	 * Right now device-tree probed devices don't get dma_mask set.
> -	 * Since shared usb code relies on it, set it here for now.
> -	 * Once we have dma capability bindings this can go away.
> -	 */
> -	ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
> -	if (ret)
> -		goto err_io;
> -
> -	ret = -ENODEV;
> -	hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev,
> -			dev_name(dev));
> -	if (!hcd) {
> -		dev_err(dev, "usb_create_hcd failed\n");
> -		goto err_io;
> -	}
> -
> -	hcd->rsrc_start = res->start;
> -	hcd->rsrc_len = resource_size(res);
> -	hcd->regs =  regs;
> -
> -	pm_runtime_enable(dev);
> -	pm_runtime_get_sync(dev);
> -
> -	ohci = hcd_to_ohci(hcd);
> -	/*
> -	 * RemoteWakeupConnected has to be set explicitly before
> -	 * calling ohci_run. The reset value of RWC is 0.
> -	 */
> -	ohci->hc_control = OHCI_CTRL_RWC;
> -
> -	ret = usb_add_hcd(hcd, irq, 0);
> -	if (ret) {
> -		dev_dbg(dev, "failed to add hcd with err %d\n", ret);
> -		goto err_add_hcd;
> -	}
> -	device_wakeup_enable(hcd->self.controller);
> -
> -	return 0;
> -
> -err_add_hcd:
> -	pm_runtime_put_sync(dev);
> -	usb_put_hcd(hcd);
> -
> -err_io:
> -	iounmap(regs);
> -
> -	return ret;
> -}
> -
> -/*
> - * may be called without controller electrically present
> - * may be called with controller, bus, and devices active
> - */
> -
> -/**
> - * ohci_hcd_omap3_remove - shutdown processing for OHCI HCDs
> - * @pdev: USB Host Controller being removed
> - *
> - * Reverses the effect of ohci_hcd_omap3_probe(), first invoking
> - * the HCD's stop() method.  It is always called from a thread
> - * context, normally "rmmod", "apmd", or something similar.
> - */
> -static int ohci_hcd_omap3_remove(struct platform_device *pdev)
> -{
> -	struct device *dev	= &pdev->dev;
> -	struct usb_hcd *hcd	= dev_get_drvdata(dev);
> -
> -	iounmap(hcd->regs);
> -	usb_remove_hcd(hcd);
> -	pm_runtime_put_sync(dev);
> -	pm_runtime_disable(dev);
> -	usb_put_hcd(hcd);
> -	return 0;
> -}
> -
> -static const struct of_device_id omap_ohci_dt_ids[] = {
> -	{ .compatible = "ti,ohci-omap3" },
> -	{ }
> -};
> -
> -MODULE_DEVICE_TABLE(of, omap_ohci_dt_ids);
> -
> -static struct platform_driver ohci_hcd_omap3_driver = {
> -	.probe		= ohci_hcd_omap3_probe,
> -	.remove		= ohci_hcd_omap3_remove,
> -	.shutdown	= usb_hcd_platform_shutdown,
> -	.driver		= {
> -		.name	= "ohci-omap3",
> -		.of_match_table = omap_ohci_dt_ids,
> -	},
> -};
> -
> -static int __init ohci_omap3_init(void)
> -{
> -	if (usb_disabled())
> -		return -ENODEV;
> -
> -	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
> -
> -	ohci_init_driver(&ohci_omap3_hc_driver, NULL);
> -	return platform_driver_register(&ohci_hcd_omap3_driver);
> -}
> -module_init(ohci_omap3_init);
> -
> -static void __exit ohci_omap3_cleanup(void)
> -{
> -	platform_driver_unregister(&ohci_hcd_omap3_driver);
> -}
> -module_exit(ohci_omap3_cleanup);
> -
> -MODULE_DESCRIPTION(DRIVER_DESC);
> -MODULE_ALIAS("platform:ohci-omap3");
> -MODULE_AUTHOR("Anand Gadiyar <gadiyar-l0cyMroinI0@public.gmane.org>");
> -MODULE_LICENSE("GPL");
> 

-- 
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 3/3] usb: host: ohci-omap3: Remove driver in favor of ohci-platform

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 8975 bytes --]

Hi,

On Mon, May 22, 2017 at 09:00:07AM -0700, Tony Lindgren wrote:
> This driver is no longer needed and can be removed. The reason why
> it's safe to remove this driver is that most omap devices don't have a
> USB low-speed or full-speed compatible PHY installed and configured
> with drivers/mfd/omap-usb-host.c. This means that devices like
> beagleboard and pandaboard need to use a high-speed USB hub in order
> to use devices like keyboard and mice.
> 
> Currently the only known configured for a full-speed PHY is the
> mdm6600 modem on droid 4 and I've verified it works just fine with
> ohci-platform.
> 
> Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> Cc: Sebastian Reichel <sebastian.reichel-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>

Reviewed-by: Sebastian Reichel <sebastian.reichel-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>

-- Sebastian

> ---
>  drivers/usb/host/Kconfig      |   6 +-
>  drivers/usb/host/Makefile     |   1 -
>  drivers/usb/host/ohci-omap3.c | 211 ------------------------------------------
>  3 files changed, 5 insertions(+), 213 deletions(-)
>  delete mode 100644 drivers/usb/host/ohci-omap3.c
> 
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -473,8 +473,12 @@ config USB_OHCI_HCD_AT91
>  config USB_OHCI_HCD_OMAP3
>  	tristate "OHCI support for OMAP3 and later chips"
>  	depends on (ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5)
> +	select USB_OHCI_HCD_PLATFORM
>  	default y
> -	---help---
> +	help
> +	  This option is deprecated now and the driver was removed, use
> +	  USB_OHCI_HCD_PLATFORM instead.
> +
>  	  Enables support for the on-chip OHCI controller on
>  	  OMAP3 and later chips.
>  
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -52,7 +52,6 @@ obj-$(CONFIG_USB_OHCI_HCD_PCI)	+= ohci-pci.o
>  obj-$(CONFIG_USB_OHCI_HCD_PLATFORM)	+= ohci-platform.o
>  obj-$(CONFIG_USB_OHCI_EXYNOS)	+= ohci-exynos.o
>  obj-$(CONFIG_USB_OHCI_HCD_OMAP1)	+= ohci-omap.o
> -obj-$(CONFIG_USB_OHCI_HCD_OMAP3)	+= ohci-omap3.o
>  obj-$(CONFIG_USB_OHCI_HCD_SPEAR)	+= ohci-spear.o
>  obj-$(CONFIG_USB_OHCI_HCD_STI)	+= ohci-st.o
>  obj-$(CONFIG_USB_OHCI_HCD_AT91)	+= ohci-at91.o
> diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
> deleted file mode 100644
> --- a/drivers/usb/host/ohci-omap3.c
> +++ /dev/null
> @@ -1,211 +0,0 @@
> -/*
> - * ohci-omap3.c - driver for OHCI on OMAP3 and later processors
> - *
> - * Bus Glue for OMAP3 USBHOST 3 port OHCI controller
> - * This controller is also used in later OMAPs and AM35x chips
> - *
> - * Copyright (C) 2007-2010 Texas Instruments, Inc.
> - * Author: Vikram Pandita <vikram.pandita-l0cyMroinI0@public.gmane.org>
> - * Author: Anand Gadiyar <gadiyar-l0cyMroinI0@public.gmane.org>
> - * Author: Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org>
> - *
> - * Based on ehci-omap.c and some other ohci glue layers
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
> - *
> - * TODO (last updated Feb 27, 2011):
> - *	- add kernel-doc
> - */
> -
> -#include <linux/dma-mapping.h>
> -#include <linux/kernel.h>
> -#include <linux/module.h>
> -#include <linux/of.h>
> -#include <linux/usb/otg.h>
> -#include <linux/platform_device.h>
> -#include <linux/pm_runtime.h>
> -#include <linux/usb.h>
> -#include <linux/usb/hcd.h>
> -
> -#include "ohci.h"
> -
> -#define DRIVER_DESC "OHCI OMAP3 driver"
> -
> -static const char hcd_name[] = "ohci-omap3";
> -static struct hc_driver __read_mostly ohci_omap3_hc_driver;
> -
> -/*
> - * configure so an HC device and id are always provided
> - * always called with process context; sleeping is OK
> - */
> -
> -/**
> - * ohci_hcd_omap3_probe - initialize OMAP-based HCDs
> - *
> - * Allocates basic resources for this USB host controller, and
> - * then invokes the start() method for the HCD associated with it
> - * through the hotplug entry's driver_data.
> - */
> -static int ohci_hcd_omap3_probe(struct platform_device *pdev)
> -{
> -	struct device		*dev = &pdev->dev;
> -	struct ohci_hcd		*ohci;
> -	struct usb_hcd		*hcd = NULL;
> -	void __iomem		*regs = NULL;
> -	struct resource		*res;
> -	int			ret;
> -	int			irq;
> -
> -	if (usb_disabled())
> -		return -ENODEV;
> -
> -	if (!dev->parent) {
> -		dev_err(dev, "Missing parent device\n");
> -		return -ENODEV;
> -	}
> -
> -	irq = platform_get_irq(pdev, 0);
> -	if (irq < 0) {
> -		dev_err(dev, "OHCI irq failed\n");
> -		return -ENODEV;
> -	}
> -
> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	if (!res) {
> -		dev_err(dev, "UHH OHCI get resource failed\n");
> -		return -ENOMEM;
> -	}
> -
> -	regs = ioremap(res->start, resource_size(res));
> -	if (!regs) {
> -		dev_err(dev, "UHH OHCI ioremap failed\n");
> -		return -ENOMEM;
> -	}
> -
> -	/*
> -	 * Right now device-tree probed devices don't get dma_mask set.
> -	 * Since shared usb code relies on it, set it here for now.
> -	 * Once we have dma capability bindings this can go away.
> -	 */
> -	ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
> -	if (ret)
> -		goto err_io;
> -
> -	ret = -ENODEV;
> -	hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev,
> -			dev_name(dev));
> -	if (!hcd) {
> -		dev_err(dev, "usb_create_hcd failed\n");
> -		goto err_io;
> -	}
> -
> -	hcd->rsrc_start = res->start;
> -	hcd->rsrc_len = resource_size(res);
> -	hcd->regs =  regs;
> -
> -	pm_runtime_enable(dev);
> -	pm_runtime_get_sync(dev);
> -
> -	ohci = hcd_to_ohci(hcd);
> -	/*
> -	 * RemoteWakeupConnected has to be set explicitly before
> -	 * calling ohci_run. The reset value of RWC is 0.
> -	 */
> -	ohci->hc_control = OHCI_CTRL_RWC;
> -
> -	ret = usb_add_hcd(hcd, irq, 0);
> -	if (ret) {
> -		dev_dbg(dev, "failed to add hcd with err %d\n", ret);
> -		goto err_add_hcd;
> -	}
> -	device_wakeup_enable(hcd->self.controller);
> -
> -	return 0;
> -
> -err_add_hcd:
> -	pm_runtime_put_sync(dev);
> -	usb_put_hcd(hcd);
> -
> -err_io:
> -	iounmap(regs);
> -
> -	return ret;
> -}
> -
> -/*
> - * may be called without controller electrically present
> - * may be called with controller, bus, and devices active
> - */
> -
> -/**
> - * ohci_hcd_omap3_remove - shutdown processing for OHCI HCDs
> - * @pdev: USB Host Controller being removed
> - *
> - * Reverses the effect of ohci_hcd_omap3_probe(), first invoking
> - * the HCD's stop() method.  It is always called from a thread
> - * context, normally "rmmod", "apmd", or something similar.
> - */
> -static int ohci_hcd_omap3_remove(struct platform_device *pdev)
> -{
> -	struct device *dev	= &pdev->dev;
> -	struct usb_hcd *hcd	= dev_get_drvdata(dev);
> -
> -	iounmap(hcd->regs);
> -	usb_remove_hcd(hcd);
> -	pm_runtime_put_sync(dev);
> -	pm_runtime_disable(dev);
> -	usb_put_hcd(hcd);
> -	return 0;
> -}
> -
> -static const struct of_device_id omap_ohci_dt_ids[] = {
> -	{ .compatible = "ti,ohci-omap3" },
> -	{ }
> -};
> -
> -MODULE_DEVICE_TABLE(of, omap_ohci_dt_ids);
> -
> -static struct platform_driver ohci_hcd_omap3_driver = {
> -	.probe		= ohci_hcd_omap3_probe,
> -	.remove		= ohci_hcd_omap3_remove,
> -	.shutdown	= usb_hcd_platform_shutdown,
> -	.driver		= {
> -		.name	= "ohci-omap3",
> -		.of_match_table = omap_ohci_dt_ids,
> -	},
> -};
> -
> -static int __init ohci_omap3_init(void)
> -{
> -	if (usb_disabled())
> -		return -ENODEV;
> -
> -	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
> -
> -	ohci_init_driver(&ohci_omap3_hc_driver, NULL);
> -	return platform_driver_register(&ohci_hcd_omap3_driver);
> -}
> -module_init(ohci_omap3_init);
> -
> -static void __exit ohci_omap3_cleanup(void)
> -{
> -	platform_driver_unregister(&ohci_hcd_omap3_driver);
> -}
> -module_exit(ohci_omap3_cleanup);
> -
> -MODULE_DESCRIPTION(DRIVER_DESC);
> -MODULE_ALIAS("platform:ohci-omap3");
> -MODULE_AUTHOR("Anand Gadiyar <gadiyar-l0cyMroinI0@public.gmane.org>");
> -MODULE_LICENSE("GPL");
> -- 
> 2.13.0

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 3/3] usb: host: ohci-omap3: Remove driver in favor of ohci-platform

[Alan Stern]

On Mon, 22 May 2017, Tony Lindgren wrote:

> This driver is no longer needed and can be removed. The reason why
> it's safe to remove this driver is that most omap devices don't have a
> USB low-speed or full-speed compatible PHY installed and configured
> with drivers/mfd/omap-usb-host.c. This means that devices like
> beagleboard and pandaboard need to use a high-speed USB hub in order
> to use devices like keyboard and mice.
> 
> Currently the only known configured for a full-speed PHY is the
> mdm6600 modem on droid 4 and I've verified it works just fine with
> ohci-platform.
> 
> Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> Cc: Sebastian Reichel <sebastian.reichel-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> ---
>  drivers/usb/host/Kconfig      |   6 +-
>  drivers/usb/host/Makefile     |   1 -
>  drivers/usb/host/ohci-omap3.c | 211 ------------------------------------------
>  3 files changed, 5 insertions(+), 213 deletions(-)
>  delete mode 100644 drivers/usb/host/ohci-omap3.c
> 
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -473,8 +473,12 @@ config USB_OHCI_HCD_AT91
>  config USB_OHCI_HCD_OMAP3
>  	tristate "OHCI support for OMAP3 and later chips"
>  	depends on (ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5)
> +	select USB_OHCI_HCD_PLATFORM
>  	default y
> -	---help---
> +	help
> +	  This option is deprecated now and the driver was removed, use
> +	  USB_OHCI_HCD_PLATFORM instead.
> +
>  	  Enables support for the on-chip OHCI controller on
>  	  OMAP3 and later chips.
>  
...

Acked-by: Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv3 0/3] Make ohci-platform usable for omap3/4/5

[Tony Lindgren]

Hi,

Here's v3 of this series.

Regards,

Tony

Changes since v2:

- Ignore pm_runtime_get_sync for remove(), not much we can do there
  as noted by Alan Stern

- Add acks

Changes since v1:                                                                                                                                                                                         - Update runtime PM support for ohci based on Alan's comments and
  more testing                                                                                                                                                                                            - Just remove ohci-omap3 as it needs LS/FS USB PHY not available
  on most hardware

Tony Lindgren (3):
  usb: host: ohci-platform: Add basic runtime PM support
  usb: host: ohci-platform: Add support for omap3 and later
  usb: host: ohci-omap3: Remove driver in favor of ohci-platform

 Documentation/devicetree/bindings/usb/usb-ohci.txt |   1 +
 drivers/usb/host/Kconfig                           |   6 +-
 drivers/usb/host/Makefile                          |   1 -
 drivers/usb/host/ohci-omap3.c                      | 211 ---------------------
 drivers/usb/host/ohci-platform.c                   |  13 ++
 5 files changed, 19 insertions(+), 213 deletions(-)
 delete mode 100644 drivers/usb/host/ohci-omap3.c

-- 
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/3] usb: host: ohci-platform: Add support for omap3 and later

[Tony Lindgren]

With the runtime PM implemented for ohci-platform driver, we can
now support omap3 and later OHCI by adding one device tree
property.

Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Cc: Sebastian Reichel <sebastian.reichel-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
Acked-by: Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>
Acked-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 Documentation/devicetree/bindings/usb/usb-ohci.txt | 1 +
 drivers/usb/host/ohci-platform.c                   | 5 +++++
 2 files changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
--- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -10,6 +10,7 @@ Optional properties:
 - big-endian-desc : boolean, set this for hcds with big-endian descriptors
 - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
 - no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
+- remote-wakeup-connected: remote wakeup is wired on the platform
 - num-ports : u32, to override the detected port count
 - clocks : a list of phandle + clock specifier pairs
 - phys : phandle + phy specifier pair
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -164,6 +164,10 @@ static int ohci_platform_probe(struct platform_device *dev)
 		if (of_property_read_bool(dev->dev.of_node, "no-big-frame-no"))
 			ohci->flags |= OHCI_QUIRK_FRAME_NO;
 
+		if (of_property_read_bool(dev->dev.of_node,
+					  "remote-wakeup-connected"))
+			ohci->hc_control = OHCI_CTRL_RWC;
+
 		of_property_read_u32(dev->dev.of_node, "num-ports",
 				     &ohci->num_ports);
 
@@ -358,6 +362,7 @@ static int ohci_platform_resume(struct device *dev)
 static const struct of_device_id ohci_platform_ids[] = {
 	{ .compatible = "generic-ohci", },
 	{ .compatible = "cavium,octeon-6335-ohci", },
+	{ .compatible = "ti,ohci-omap3", },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ohci_platform_ids);
-- 
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html