From: David Ahern <dsahern@gmail.com>
To: netdev@vger.kernel.org
Cc: roopa@cumulusnetworks.com, David Ahern <dsahern@gmail.com>
Subject: [PATCH net-next 2/6] net: lwtunnel: Add extack to encap attr validation
Date: Wed, 24 May 2017 21:54:38 -0600 [thread overview]
Message-ID: <20170525035442.51407-3-dsahern@gmail.com> (raw)
In-Reply-To: <20170525035442.51407-1-dsahern@gmail.com>
Pass extack down to lwtunnel_valid_encap_type and
lwtunnel_valid_encap_type_attr. Add messages for unknown
or unsupported encap types.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
include/net/lwtunnel.h | 13 +++++++++----
net/core/lwtunnel.c | 18 +++++++++++++-----
net/ipv4/fib_frontend.c | 6 ++++--
net/ipv6/route.c | 4 ++--
4 files changed, 28 insertions(+), 13 deletions(-)
diff --git a/include/net/lwtunnel.h b/include/net/lwtunnel.h
index ebfe237aad7e..ca6f002774ef 100644
--- a/include/net/lwtunnel.h
+++ b/include/net/lwtunnel.h
@@ -107,8 +107,10 @@ int lwtunnel_encap_add_ops(const struct lwtunnel_encap_ops *op,
unsigned int num);
int lwtunnel_encap_del_ops(const struct lwtunnel_encap_ops *op,
unsigned int num);
-int lwtunnel_valid_encap_type(u16 encap_type);
-int lwtunnel_valid_encap_type_attr(struct nlattr *attr, int len);
+int lwtunnel_valid_encap_type(u16 encap_type,
+ struct netlink_ext_ack *extack);
+int lwtunnel_valid_encap_type_attr(struct nlattr *attr, int len,
+ struct netlink_ext_ack *extack);
int lwtunnel_build_state(u16 encap_type,
struct nlattr *encap,
unsigned int family, const void *cfg,
@@ -172,11 +174,14 @@ static inline int lwtunnel_encap_del_ops(const struct lwtunnel_encap_ops *op,
return -EOPNOTSUPP;
}
-static inline int lwtunnel_valid_encap_type(u16 encap_type)
+static inline int lwtunnel_valid_encap_type(u16 encap_type,
+ struct netlink_ext_ack *extack)
{
+ NL_SET_ERR_MSG(extack, "CONFIG_LWTUNNEL is not enabled in this kernel");
return -EOPNOTSUPP;
}
-static inline int lwtunnel_valid_encap_type_attr(struct nlattr *attr, int len)
+static inline int lwtunnel_valid_encap_type_attr(struct nlattr *attr, int len,
+ struct netlink_ext_ack *extack)
{
/* return 0 since we are not walking attr looking for
* RTA_ENCAP_TYPE attribute on nexthops.
diff --git a/net/core/lwtunnel.c b/net/core/lwtunnel.c
index cfae3d5fe11f..ab840386a74d 100644
--- a/net/core/lwtunnel.c
+++ b/net/core/lwtunnel.c
@@ -126,14 +126,16 @@ int lwtunnel_build_state(u16 encap_type,
}
EXPORT_SYMBOL(lwtunnel_build_state);
-int lwtunnel_valid_encap_type(u16 encap_type)
+int lwtunnel_valid_encap_type(u16 encap_type, struct netlink_ext_ack *extack)
{
const struct lwtunnel_encap_ops *ops;
int ret = -EINVAL;
if (encap_type == LWTUNNEL_ENCAP_NONE ||
- encap_type > LWTUNNEL_ENCAP_MAX)
+ encap_type > LWTUNNEL_ENCAP_MAX) {
+ NL_SET_ERR_MSG(extack, "Unknown lwt encapsulation type");
return ret;
+ }
rcu_read_lock();
ops = rcu_dereference(lwtun_encaps[encap_type]);
@@ -153,11 +155,16 @@ int lwtunnel_valid_encap_type(u16 encap_type)
}
}
#endif
- return ops ? 0 : -EOPNOTSUPP;
+ ret = ops ? 0 : -EOPNOTSUPP;
+ if (ret < 0)
+ NL_SET_ERR_MSG(extack, "lwt encapsulation type not supported");
+
+ return ret;
}
EXPORT_SYMBOL(lwtunnel_valid_encap_type);
-int lwtunnel_valid_encap_type_attr(struct nlattr *attr, int remaining)
+int lwtunnel_valid_encap_type_attr(struct nlattr *attr, int remaining,
+ struct netlink_ext_ack *extack)
{
struct rtnexthop *rtnh = (struct rtnexthop *)attr;
struct nlattr *nla_entype;
@@ -174,7 +181,8 @@ int lwtunnel_valid_encap_type_attr(struct nlattr *attr, int remaining)
if (nla_entype) {
encap_type = nla_get_u16(nla_entype);
- if (lwtunnel_valid_encap_type(encap_type) != 0)
+ if (lwtunnel_valid_encap_type(encap_type,
+ extack) != 0)
return -EOPNOTSUPP;
}
}
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 2d55882d566e..f03fe8521f6e 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -684,7 +684,8 @@ static int rtm_to_fib_config(struct net *net, struct sk_buff *skb,
break;
case RTA_MULTIPATH:
err = lwtunnel_valid_encap_type_attr(nla_data(attr),
- nla_len(attr));
+ nla_len(attr),
+ extack);
if (err < 0)
goto errout;
cfg->fc_mp = nla_data(attr);
@@ -701,7 +702,8 @@ static int rtm_to_fib_config(struct net *net, struct sk_buff *skb,
break;
case RTA_ENCAP_TYPE:
cfg->fc_encap_type = nla_get_u16(attr);
- err = lwtunnel_valid_encap_type(cfg->fc_encap_type);
+ err = lwtunnel_valid_encap_type(cfg->fc_encap_type,
+ extack);
if (err < 0)
goto errout;
break;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 80bda31ffbbe..afc76b24ee6b 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -3016,7 +3016,7 @@ static int rtm_to_fib6_config(struct sk_buff *skb, struct nlmsghdr *nlh,
cfg->fc_mp_len = nla_len(tb[RTA_MULTIPATH]);
err = lwtunnel_valid_encap_type_attr(cfg->fc_mp,
- cfg->fc_mp_len);
+ cfg->fc_mp_len, extack);
if (err < 0)
goto errout;
}
@@ -3035,7 +3035,7 @@ static int rtm_to_fib6_config(struct sk_buff *skb, struct nlmsghdr *nlh,
if (tb[RTA_ENCAP_TYPE]) {
cfg->fc_encap_type = nla_get_u16(tb[RTA_ENCAP_TYPE]);
- err = lwtunnel_valid_encap_type(cfg->fc_encap_type);
+ err = lwtunnel_valid_encap_type(cfg->fc_encap_type, extack);
if (err < 0)
goto errout;
}
--
2.11.0 (Apple Git-81)
next prev parent reply other threads:[~2017-05-25 3:54 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-25 3:54 [PATCH net-next 0/6] net: another round of extack handling for routing David Ahern
2017-05-25 3:54 ` [PATCH net-next 1/6] net: ipv4: Add extack message for invalid prefix or length David Ahern
2017-05-25 3:54 ` David Ahern [this message]
2017-05-25 3:54 ` [PATCH net-next 3/6] net: plumb extack arg down to lwtunnel build state David Ahern
2017-05-25 3:54 ` [PATCH net-next 4/6] net: Fill in extack for mpls lwt encap David Ahern
2017-05-25 3:54 ` [PATCH net-next 5/6] net: mpls: Add extack messages for route add and delete failures David Ahern
2017-05-25 3:54 ` [PATCH net-next 6/6] net: mpls: minor cleanups David Ahern
2017-05-25 18:56 ` David Miller
2017-05-25 19:46 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170525035442.51407-3-dsahern@gmail.com \
--to=dsahern@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=roopa@cumulusnetworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.