All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: Don Zickus <dzickus@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>,
	linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org
Subject: [PATCH 3/4] watchdog: split out config options
Date: Thu, 25 May 2017 18:28:55 +1000	[thread overview]
Message-ID: <20170525082856.21685-4-npiggin@gmail.com> (raw)
In-Reply-To: <20170525082856.21685-1-npiggin@gmail.com>

Split SOFTLOCKUP_DETECTOR from LOCKUP_DETECTOR, and split
HARDLOCKUP_DETECTOR_PERF from HARDLOCKUP_DETECTOR.

LOCKUP_DETECTOR provides the boot, sysctl, and programming interfaces
for lockup detectors. An architecture that defines HAVE_NMI_WATCHDOG
need not use this this if it has a very basic watchdog or uses its own
options and interfaces (e.g., sparc). touch_nmi_watchdog() will
continue to call their arch_touch_nmi_watchdog().

HARDLOCKUP_DETECTOR_PERF is the perf-based lockup detector.

HARDLOCKUP_DETECTOR is the framework for arch NMI_WATCHDOG hard lockup
detectors that conform to the LOCKUP_DETECTOR interfaces.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/kernel/setup_64.c |   2 +-
 arch/x86/kernel/apic/hw_nmi.c  |   2 +-
 include/linux/nmi.h            |  35 ++++--
 kernel/Makefile                |   2 +-
 kernel/sysctl.c                |  18 ++--
 kernel/watchdog.c              | 238 ++++++++++++++++++++++++++---------------
 kernel/watchdog_hld.c          |  32 ------
 lib/Kconfig.debug              |  27 +++--
 8 files changed, 212 insertions(+), 144 deletions(-)

diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index f35ff9dea4fb..ab650905f75a 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -727,7 +727,7 @@ struct ppc_pci_io ppc_pci_io;
 EXPORT_SYMBOL(ppc_pci_io);
 #endif
 
-#ifdef CONFIG_HARDLOCKUP_DETECTOR
+#ifdef CONFIG_HARDLOCKUP_DETECTOR_PERF
 u64 hw_nmi_get_sample_period(int watchdog_thresh)
 {
 	return ppc_proc_freq * watchdog_thresh;
diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c
index c73c9fb281e1..d6f387780849 100644
--- a/arch/x86/kernel/apic/hw_nmi.c
+++ b/arch/x86/kernel/apic/hw_nmi.c
@@ -19,7 +19,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 
-#ifdef CONFIG_HARDLOCKUP_DETECTOR
+#ifdef CONFIG_HARDLOCKUP_DETECTOR_PERF
 u64 hw_nmi_get_sample_period(int watchdog_thresh)
 {
 	return (u64)(cpu_khz) * 1000 * watchdog_thresh;
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index 6ea465a842a1..c11dc695fb0b 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -11,13 +11,21 @@
 #endif
 
 #ifdef CONFIG_LOCKUP_DETECTOR
+void lockup_detector_init(void);
+#else
+static inline void lockup_detector_init(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOFTLOCKUP_DETECTOR
 extern void touch_softlockup_watchdog_sched(void);
 extern void touch_softlockup_watchdog(void);
 extern void touch_softlockup_watchdog_sync(void);
 extern void touch_all_softlockup_watchdogs(void);
 extern unsigned int  softlockup_panic;
-extern unsigned int  hardlockup_panic;
-void lockup_detector_init(void);
+extern int soft_watchdog_enabled;
+extern atomic_t watchdog_park_in_progress;
 #else
 static inline void touch_softlockup_watchdog_sched(void)
 {
@@ -31,9 +39,6 @@ static inline void touch_softlockup_watchdog_sync(void)
 static inline void touch_all_softlockup_watchdogs(void)
 {
 }
-static inline void lockup_detector_init(void)
-{
-}
 #endif
 
 #ifdef CONFIG_DETECT_HUNG_TASK
@@ -61,14 +66,19 @@ static inline void reset_hung_task_detector(void)
 #define NMI_WATCHDOG_ENABLED      (1 << NMI_WATCHDOG_ENABLED_BIT)
 #define SOFT_WATCHDOG_ENABLED     (1 << SOFT_WATCHDOG_ENABLED_BIT)
 
-#if defined(CONFIG_HARDLOCKUP_DETECTOR)
-extern void hld_touch_nmi_watchdog(void);
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
 extern void hardlockup_detector_disable(void);
+extern unsigned int hardlockup_panic;
 #else
-static inline void hld_touch_nmi_watchdog(void) {}
 static inline void hardlockup_detector_disable(void) {}
 #endif
 
+#ifdef CONFIG_HARDLOCKUP_DETECTOR_PERF
+extern void hld_touch_nmi_watchdog(void);
+#else
+static inline void hld_touch_nmi_watchdog(void) {}
+#endif
+
 /**
  * touch_nmi_watchdog - restart NMI watchdog timeout.
  * 
@@ -140,15 +150,18 @@ static inline bool trigger_single_cpu_backtrace(int cpu)
 }
 #endif
 
-#ifdef CONFIG_LOCKUP_DETECTOR
+#ifdef CONFIG_HARDLOCKUP_DETECTOR_PERF
 u64 hw_nmi_get_sample_period(int watchdog_thresh);
+#endif
+
+#ifdef CONFIG_LOCKUP_DETECTOR
 extern int nmi_watchdog_enabled;
-extern int soft_watchdog_enabled;
 extern int watchdog_user_enabled;
 extern int watchdog_thresh;
 extern unsigned long watchdog_enabled;
+extern struct cpumask watchdog_cpumask;
 extern unsigned long *watchdog_cpumask_bits;
-extern atomic_t watchdog_park_in_progress;
+extern int __read_mostly watchdog_suspended;
 #ifdef CONFIG_SMP
 extern int sysctl_softlockup_all_cpu_backtrace;
 extern int sysctl_hardlockup_all_cpu_backtrace;
diff --git a/kernel/Makefile b/kernel/Makefile
index 72aa080f91f0..4cb8e8b23c6e 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -82,7 +82,7 @@ obj-$(CONFIG_KPROBES) += kprobes.o
 obj-$(CONFIG_KGDB) += debug/
 obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o
 obj-$(CONFIG_LOCKUP_DETECTOR) += watchdog.o
-obj-$(CONFIG_HARDLOCKUP_DETECTOR) += watchdog_hld.o
+obj-$(CONFIG_HARDLOCKUP_DETECTOR_PERF) += watchdog_hld.o
 obj-$(CONFIG_SECCOMP) += seccomp.o
 obj-$(CONFIG_RELAY) += relay.o
 obj-$(CONFIG_SYSCTL) += utsname_sysctl.o
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 4dfba1a76cc3..fa37faa89143 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -873,13 +873,21 @@ static struct ctl_table kern_table[] = {
 		.mode           = 0644,
 		.proc_handler   = proc_nmi_watchdog,
 		.extra1		= &zero,
-#if defined(CONFIG_HAVE_NMI_WATCHDOG) || defined(CONFIG_HARDLOCKUP_DETECTOR)
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
 		.extra2		= &one,
 #else
 		.extra2		= &zero,
 #endif
 	},
 	{
+		.procname	= "watchdog_cpumask",
+		.data		= &watchdog_cpumask_bits,
+		.maxlen		= NR_CPUS,
+		.mode		= 0644,
+		.proc_handler	= proc_watchdog_cpumask,
+	},
+#ifdef CONFIG_SOFTLOCKUP_DETECTOR
+	{
 		.procname       = "soft_watchdog",
 		.data           = &soft_watchdog_enabled,
 		.maxlen         = sizeof (int),
@@ -889,13 +897,6 @@ static struct ctl_table kern_table[] = {
 		.extra2		= &one,
 	},
 	{
-		.procname	= "watchdog_cpumask",
-		.data		= &watchdog_cpumask_bits,
-		.maxlen		= NR_CPUS,
-		.mode		= 0644,
-		.proc_handler	= proc_watchdog_cpumask,
-	},
-	{
 		.procname	= "softlockup_panic",
 		.data		= &softlockup_panic,
 		.maxlen		= sizeof(int),
@@ -904,6 +905,7 @@ static struct ctl_table kern_table[] = {
 		.extra1		= &zero,
 		.extra2		= &one,
 	},
+#endif
 #ifdef CONFIG_HARDLOCKUP_DETECTOR
 	{
 		.procname	= "hardlockup_panic",
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 03e0b69bb5bf..deb010505646 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -29,15 +29,55 @@
 #include <linux/kvm_para.h>
 #include <linux/kthread.h>
 
+/* Watchdog configuration */
 static DEFINE_MUTEX(watchdog_proc_mutex);
 
-#if defined(CONFIG_HAVE_NMI_WATCHDOG) || defined(CONFIG_HARDLOCKUP_DETECTOR)
+int __read_mostly nmi_watchdog_enabled;
+
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
 unsigned long __read_mostly watchdog_enabled = SOFT_WATCHDOG_ENABLED|NMI_WATCHDOG_ENABLED;
+
+/* boot commands */
+/*
+ * Should we panic when a soft-lockup or hard-lockup occurs:
+ */
+unsigned int __read_mostly hardlockup_panic =
+			CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE;
+/*
+ * We may not want to enable hard lockup detection by default in all cases,
+ * for example when running the kernel as a guest on a hypervisor. In these
+ * cases this function can be called to disable hard lockup detection. This
+ * function should only be executed once by the boot processor before the
+ * kernel command line parameters are parsed, because otherwise it is not
+ * possible to override this in hardlockup_panic_setup().
+ */
+void hardlockup_detector_disable(void)
+{
+	watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
+}
+
+static int __init hardlockup_panic_setup(char *str)
+{
+	if (!strncmp(str, "panic", 5))
+		hardlockup_panic = 1;
+	else if (!strncmp(str, "nopanic", 7))
+		hardlockup_panic = 0;
+	else if (!strncmp(str, "0", 1))
+		watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
+	else if (!strncmp(str, "1", 1))
+		watchdog_enabled |= NMI_WATCHDOG_ENABLED;
+	return 1;
+}
+__setup("nmi_watchdog=", hardlockup_panic_setup);
+
 #else
 unsigned long __read_mostly watchdog_enabled = SOFT_WATCHDOG_ENABLED;
 #endif
-int __read_mostly nmi_watchdog_enabled;
+
+#ifdef CONFIG_SOFTLOCKUP_DETECTOR
 int __read_mostly soft_watchdog_enabled;
+#endif
+
 int __read_mostly watchdog_user_enabled;
 int __read_mostly watchdog_thresh = 10;
 
@@ -45,15 +85,9 @@ int __read_mostly watchdog_thresh = 10;
 int __read_mostly sysctl_softlockup_all_cpu_backtrace;
 int __read_mostly sysctl_hardlockup_all_cpu_backtrace;
 #endif
-static struct cpumask watchdog_cpumask __read_mostly;
+struct cpumask watchdog_cpumask __read_mostly;
 unsigned long *watchdog_cpumask_bits = cpumask_bits(&watchdog_cpumask);
 
-/* Helper for online, unparked cpus. */
-#define for_each_watchdog_cpu(cpu) \
-	for_each_cpu_and((cpu), cpu_online_mask, &watchdog_cpumask)
-
-atomic_t watchdog_park_in_progress = ATOMIC_INIT(0);
-
 /*
  * The 'watchdog_running' variable is set to 1 when the watchdog threads
  * are registered/started and is set to 0 when the watchdog threads are
@@ -72,7 +106,27 @@ static int __read_mostly watchdog_running;
  * of 'watchdog_running' cannot change while the watchdog is deactivated
  * temporarily (see related code in 'proc' handlers).
  */
-static int __read_mostly watchdog_suspended;
+int __read_mostly watchdog_suspended;
+
+/*
+ * These functions can be overridden if an architecture implements its
+ * own hardlockup detector.
+ */
+int __weak watchdog_nmi_enable(unsigned int cpu)
+{
+	return 0;
+}
+void __weak watchdog_nmi_disable(unsigned int cpu)
+{
+}
+
+#ifdef CONFIG_SOFTLOCKUP_DETECTOR
+
+/* Helper for online, unparked cpus. */
+#define for_each_watchdog_cpu(cpu) \
+	for_each_cpu_and((cpu), cpu_online_mask, &watchdog_cpumask)
+
+atomic_t watchdog_park_in_progress = ATOMIC_INIT(0);
 
 static u64 __read_mostly sample_period;
 
@@ -120,6 +174,7 @@ static int __init softlockup_all_cpu_backtrace_setup(char *str)
 	return 1;
 }
 __setup("softlockup_all_cpu_backtrace=", softlockup_all_cpu_backtrace_setup);
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
 static int __init hardlockup_all_cpu_backtrace_setup(char *str)
 {
 	sysctl_hardlockup_all_cpu_backtrace =
@@ -128,6 +183,7 @@ static int __init hardlockup_all_cpu_backtrace_setup(char *str)
 }
 __setup("hardlockup_all_cpu_backtrace=", hardlockup_all_cpu_backtrace_setup);
 #endif
+#endif
 
 /*
  * Hard-lockup warnings should be triggered after just a few seconds. Soft-
@@ -213,18 +269,6 @@ void touch_softlockup_watchdog_sync(void)
 	__this_cpu_write(watchdog_touch_ts, 0);
 }
 
-/* watchdog detector functions */
-bool is_hardlockup(void)
-{
-	unsigned long hrint = __this_cpu_read(hrtimer_interrupts);
-
-	if (__this_cpu_read(hrtimer_interrupts_saved) == hrint)
-		return true;
-
-	__this_cpu_write(hrtimer_interrupts_saved, hrint);
-	return false;
-}
-
 static int is_softlockup(unsigned long touch_ts)
 {
 	unsigned long now = get_timestamp();
@@ -237,21 +281,21 @@ static int is_softlockup(unsigned long touch_ts)
 	return 0;
 }
 
-static void watchdog_interrupt_count(void)
+/* watchdog detector functions */
+bool is_hardlockup(void)
 {
-	__this_cpu_inc(hrtimer_interrupts);
-}
+	unsigned long hrint = __this_cpu_read(hrtimer_interrupts);
 
-/*
- * These two functions are mostly architecture specific
- * defining them as weak here.
- */
-int __weak watchdog_nmi_enable(unsigned int cpu)
-{
-	return 0;
+	if (__this_cpu_read(hrtimer_interrupts_saved) == hrint)
+		return true;
+
+	__this_cpu_write(hrtimer_interrupts_saved, hrint);
+	return false;
 }
-void __weak watchdog_nmi_disable(unsigned int cpu)
+
+static void watchdog_interrupt_count(void)
 {
+	__this_cpu_inc(hrtimer_interrupts);
 }
 
 static int watchdog_enable_all_cpus(void);
@@ -502,57 +546,6 @@ static void watchdog_unpark_threads(void)
 		kthread_unpark(per_cpu(softlockup_watchdog, cpu));
 }
 
-/*
- * Suspend the hard and soft lockup detector by parking the watchdog threads.
- */
-int lockup_detector_suspend(void)
-{
-	int ret = 0;
-
-	get_online_cpus();
-	mutex_lock(&watchdog_proc_mutex);
-	/*
-	 * Multiple suspend requests can be active in parallel (counted by
-	 * the 'watchdog_suspended' variable). If the watchdog threads are
-	 * running, the first caller takes care that they will be parked.
-	 * The state of 'watchdog_running' cannot change while a suspend
-	 * request is active (see related code in 'proc' handlers).
-	 */
-	if (watchdog_running && !watchdog_suspended)
-		ret = watchdog_park_threads();
-
-	if (ret == 0)
-		watchdog_suspended++;
-	else {
-		watchdog_disable_all_cpus();
-		pr_err("Failed to suspend lockup detectors, disabled\n");
-		watchdog_enabled = 0;
-	}
-
-	mutex_unlock(&watchdog_proc_mutex);
-
-	return ret;
-}
-
-/*
- * Resume the hard and soft lockup detector by unparking the watchdog threads.
- */
-void lockup_detector_resume(void)
-{
-	mutex_lock(&watchdog_proc_mutex);
-
-	watchdog_suspended--;
-	/*
-	 * The watchdog threads are unparked if they were previously running
-	 * and if there is no more active suspend request.
-	 */
-	if (watchdog_running && !watchdog_suspended)
-		watchdog_unpark_threads();
-
-	mutex_unlock(&watchdog_proc_mutex);
-	put_online_cpus();
-}
-
 static int update_watchdog_all_cpus(void)
 {
 	int ret;
@@ -604,6 +597,81 @@ static void watchdog_disable_all_cpus(void)
 	}
 }
 
+#else /* SOFTLOCKUP */
+static int watchdog_park_threads(void)
+{
+	return 0;
+}
+
+static void watchdog_unpark_threads(void)
+{
+}
+
+static int watchdog_enable_all_cpus(void)
+{
+	return 0;
+}
+
+static void watchdog_disable_all_cpus(void)
+{
+}
+
+static void set_sample_period(void)
+{
+}
+#endif /* SOFTLOCKUP */
+
+/*
+ * Suspend the hard and soft lockup detector by parking the watchdog threads.
+ */
+int lockup_detector_suspend(void)
+{
+	int ret = 0;
+
+	get_online_cpus();
+	mutex_lock(&watchdog_proc_mutex);
+	/*
+	 * Multiple suspend requests can be active in parallel (counted by
+	 * the 'watchdog_suspended' variable). If the watchdog threads are
+	 * running, the first caller takes care that they will be parked.
+	 * The state of 'watchdog_running' cannot change while a suspend
+	 * request is active (see related code in 'proc' handlers).
+	 */
+	if (watchdog_running && !watchdog_suspended)
+		ret = watchdog_park_threads();
+
+	if (ret == 0)
+		watchdog_suspended++;
+	else {
+		watchdog_disable_all_cpus();
+		pr_err("Failed to suspend lockup detectors, disabled\n");
+		watchdog_enabled = 0;
+	}
+
+	mutex_unlock(&watchdog_proc_mutex);
+
+	return ret;
+}
+
+/*
+ * Resume the hard and soft lockup detector by unparking the watchdog threads.
+ */
+void lockup_detector_resume(void)
+{
+	mutex_lock(&watchdog_proc_mutex);
+
+	watchdog_suspended--;
+	/*
+	 * The watchdog threads are unparked if they were previously running
+	 * and if there is no more active suspend request.
+	 */
+	if (watchdog_running && !watchdog_suspended)
+		watchdog_unpark_threads();
+
+	mutex_unlock(&watchdog_proc_mutex);
+	put_online_cpus();
+}
+
 #ifdef CONFIG_SYSCTL
 
 /*
@@ -810,9 +878,11 @@ int proc_watchdog_cpumask(struct ctl_table *table, int write,
 			 * a temporary cpumask, so we are likely not in a
 			 * position to do much else to make things better.
 			 */
+#ifdef CONFIG_SOFTLOCKUP_DETECTOR
 			if (smpboot_update_cpumask_percpu_thread(
 				    &watchdog_threads, &watchdog_cpumask) != 0)
 				pr_err("cpumask update failed\n");
+#endif
 		}
 	}
 out:
diff --git a/kernel/watchdog_hld.c b/kernel/watchdog_hld.c
index e0d7a7c43fb5..ffd4fa59fbde 100644
--- a/kernel/watchdog_hld.c
+++ b/kernel/watchdog_hld.c
@@ -22,39 +22,7 @@ static DEFINE_PER_CPU(bool, hard_watchdog_warn);
 static DEFINE_PER_CPU(bool, watchdog_nmi_touch);
 static DEFINE_PER_CPU(struct perf_event *, watchdog_ev);
 
-/* boot commands */
-/*
- * Should we panic when a soft-lockup or hard-lockup occurs:
- */
-unsigned int __read_mostly hardlockup_panic =
-			CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE;
 static unsigned long hardlockup_allcpu_dumped;
-/*
- * We may not want to enable hard lockup detection by default in all cases,
- * for example when running the kernel as a guest on a hypervisor. In these
- * cases this function can be called to disable hard lockup detection. This
- * function should only be executed once by the boot processor before the
- * kernel command line parameters are parsed, because otherwise it is not
- * possible to override this in hardlockup_panic_setup().
- */
-void hardlockup_detector_disable(void)
-{
-	watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
-}
-
-static int __init hardlockup_panic_setup(char *str)
-{
-	if (!strncmp(str, "panic", 5))
-		hardlockup_panic = 1;
-	else if (!strncmp(str, "nopanic", 7))
-		hardlockup_panic = 0;
-	else if (!strncmp(str, "0", 1))
-		watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
-	else if (!strncmp(str, "1", 1))
-		watchdog_enabled |= NMI_WATCHDOG_ENABLED;
-	return 1;
-}
-__setup("nmi_watchdog=", hardlockup_panic_setup);
 
 void hld_touch_nmi_watchdog(void)
 {
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index e4587ebe52c7..74d5ad667426 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -801,10 +801,25 @@ config LOCKUP_DETECTOR
 	  The frequency of hrtimer and NMI events and the soft and hard lockup
 	  thresholds can be controlled through the sysctl watchdog_thresh.
 
+config SOFTLOCKUP_DETECTOR
+	bool "Detect Soft Lockups"
+	depends on LOCKUP_DETECTOR
+
+config HARDLOCKUP_DETECTOR_PERF
+	bool
+	select SOFTLOCKUP_DETECTOR
+
+#
+# arch/ can define HAVE_NMI_WATCHDOG to provide their own NMI watchdog
+# rather than the perf based detector.
+#
+# The arch may do its own thing, or select HARDLOCKUP_DETECTOR, which
+#
 config HARDLOCKUP_DETECTOR
-	def_bool y
-	depends on LOCKUP_DETECTOR && !HAVE_NMI_WATCHDOG
-	depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI
+	bool "Detect Hard Lockups"
+	depends on LOCKUP_DETECTOR
+	depends on !HAVE_NMI_WATCHDOG || (PERF_EVENTS && HAVE_PERF_EVENTS_NMI)
+	select HARDLOCKUP_DETECTOR_PERF if !HAVE_NMI_WATCHDOG
 
 config BOOTPARAM_HARDLOCKUP_PANIC
 	bool "Panic (Reboot) On Hard Lockups"
@@ -826,7 +841,7 @@ config BOOTPARAM_HARDLOCKUP_PANIC_VALUE
 
 config BOOTPARAM_SOFTLOCKUP_PANIC
 	bool "Panic (Reboot) On Soft Lockups"
-	depends on LOCKUP_DETECTOR
+	depends on SOFTLOCKUP_DETECTOR
 	help
 	  Say Y here to enable the kernel to panic on "soft lockups",
 	  which are bugs that cause the kernel to loop in kernel
@@ -843,7 +858,7 @@ config BOOTPARAM_SOFTLOCKUP_PANIC
 
 config BOOTPARAM_SOFTLOCKUP_PANIC_VALUE
 	int
-	depends on LOCKUP_DETECTOR
+	depends on SOFTLOCKUP_DETECTOR
 	range 0 1
 	default 0 if !BOOTPARAM_SOFTLOCKUP_PANIC
 	default 1 if BOOTPARAM_SOFTLOCKUP_PANIC
@@ -851,7 +866,7 @@ config BOOTPARAM_SOFTLOCKUP_PANIC_VALUE
 config DETECT_HUNG_TASK
 	bool "Detect Hung Tasks"
 	depends on DEBUG_KERNEL
-	default LOCKUP_DETECTOR
+	default SOFTLOCKUP_DETECTOR
 	help
 	  Say Y here to enable the kernel to detect "hung tasks",
 	  which are bugs that cause the task to be stuck in
-- 
2.11.0

  parent reply	other threads:[~2017-05-25  8:29 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-25  8:28 [PATCH 0/4][V2] Improve watchdog config for arch watchdogs Nicholas Piggin
2017-05-25  8:28 ` [PATCH 1/4] watchdog: remove unused declaration Nicholas Piggin
2017-05-25  8:28 ` [PATCH 2/4] watchdog: introduce arch_touch_nmi_watchdog() Nicholas Piggin
2017-05-25 13:55   ` Don Zickus
2017-05-26  0:31     ` Nicholas Piggin
2017-05-26 14:05       ` Don Zickus
2017-05-25  8:28 ` Nicholas Piggin [this message]
2017-05-25 11:30   ` [PATCH 3/4] watchdog: split out config options kbuild test robot
2017-05-25 11:30     ` kbuild test robot
2017-05-25 11:30     ` kbuild test robot
2017-05-25 12:09   ` kbuild test robot
2017-05-25 12:09     ` kbuild test robot
2017-05-25 12:09     ` kbuild test robot
2017-05-25  8:28 ` [PATCH 4/4] watchdog: provide watchdog_reconfigure() for arch watchdogs Nicholas Piggin
2017-05-25 14:08   ` Don Zickus
2017-05-26  0:39     ` Nicholas Piggin
2017-05-26 14:21       ` Don Zickus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170525082856.21685-4-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=dzickus@redhat.com \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.