All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Clark <robdclark@gmail.com>
To: iommu@lists.linux-foundation.org
Cc: linux-arm-msm@vger.kernel.org, Rob Herring <robh@kernel.org>,
	Robin Murphy <robin.murphy@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Sricharan <sricharan@codeaurora.org>,
	Archit Taneja <architt@codeaurora.org>,
	Stanimir Varbanov <stanimir.varbanov@linaro.org>,
	Rob Clark <robdclark@gmail.com>
Subject: [PATCH 4/4] iommu: qcom: initialize secure page table
Date: Thu,  1 Jun 2017 09:58:49 -0400	[thread overview]
Message-ID: <20170601135849.14978-5-robdclark@gmail.com> (raw)
In-Reply-To: <20170601135849.14978-1-robdclark@gmail.com>

From: Stanimir Varbanov <stanimir.varbanov@linaro.org>

This basically gets the secure page table size, allocates memory for
secure pagetables and passes the physical address to the trusted zone.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
 drivers/iommu/qcom_iommu.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/drivers/iommu/qcom_iommu.c b/drivers/iommu/qcom_iommu.c
index 3b578e6..753ee0e 100644
--- a/drivers/iommu/qcom_iommu.c
+++ b/drivers/iommu/qcom_iommu.c
@@ -636,6 +636,51 @@ static void qcom_iommu_disable_clocks(struct qcom_iommu_dev *qcom_iommu)
 	clk_disable_unprepare(qcom_iommu->iface_clk);
 }
 
+static int qcom_iommu_sec_ptbl_init(struct device *dev)
+{
+	size_t psize = 0;
+	unsigned int spare = 0;
+	void *cpu_addr;
+	dma_addr_t paddr;
+	unsigned long attrs;
+	static bool allocated = false;
+	int ret;
+
+	if (allocated)
+		return 0;
+
+	ret = qcom_scm_iommu_secure_ptbl_size(spare, &psize);
+	if (ret) {
+		dev_err(dev, "failed to get iommu secure pgtable size (%d)\n",
+			ret);
+		return ret;
+	}
+
+	dev_info(dev, "iommu sec: pgtable size: %zu\n", psize);
+
+	attrs = DMA_ATTR_NO_KERNEL_MAPPING;
+
+	cpu_addr = dma_alloc_attrs(dev, psize, &paddr, GFP_KERNEL, attrs);
+	if (!cpu_addr) {
+		dev_err(dev, "failed to allocate %zu bytes for pgtable\n",
+			psize);
+		return -ENOMEM;
+	}
+
+	ret = qcom_scm_iommu_secure_ptbl_init(paddr, psize, spare);
+	if (ret) {
+		dev_err(dev, "failed to init iommu pgtable (%d)\n", ret);
+		goto free_mem;
+	}
+
+	allocated = true;
+	return 0;
+
+free_mem:
+	dma_free_attrs(dev, psize, cpu_addr, paddr, attrs);
+	return ret;
+}
+
 static int get_asid(const struct device_node *np)
 {
 	u32 reg;
@@ -733,6 +778,17 @@ static struct platform_driver qcom_iommu_ctx_driver = {
 	.remove = qcom_iommu_ctx_remove,
 };
 
+static bool qcom_iommu_has_secure_context(struct qcom_iommu_dev *qcom_iommu)
+{
+	struct device_node *child;
+
+	for_each_child_of_node(qcom_iommu->dev->of_node, child)
+		if (of_device_is_compatible(child, "qcom,msm-iommu-v1-sec"))
+			return true;
+
+	return false;
+}
+
 static int qcom_iommu_device_probe(struct platform_device *pdev)
 {
 	struct device_node *child;
@@ -777,6 +833,14 @@ static int qcom_iommu_device_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	if (qcom_iommu_has_secure_context(qcom_iommu)) {
+		ret = qcom_iommu_sec_ptbl_init(dev);
+		if (ret) {
+			dev_err(dev, "cannot init secure pg table(%d)\n", ret);
+			return ret;
+		}
+	}
+
 	platform_set_drvdata(pdev, qcom_iommu);
 
 	pm_runtime_enable(dev);
-- 
2.9.4

  parent reply	other threads:[~2017-06-01 13:59 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-01 13:58 [PATCH 0/4] iommu: add qcom_iommu for early "B" family devices Rob Clark
2017-06-01 13:58 ` [PATCH 1/4] Docs: dt: document qcom iommu bindings Rob Clark
2017-06-01 13:58 ` [PATCH 2/4] iommu: arm-smmu: split out register defines Rob Clark
2017-06-01 13:58 ` [PATCH 3/4] iommu: add qcom_iommu Rob Clark
2017-06-01 13:58 ` Rob Clark [this message]
  -- strict thread matches above, loose matches on Subject: below --
2017-08-03 10:47 [PATCH 0/4] iommu: add qcom_iommu for early "B" family devices Rob Clark
     [not found] ` <20170803104800.18624-1-robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-08-03 10:47   ` [PATCH 4/4] iommu: qcom: initialize secure page table Rob Clark
2017-08-03 10:47     ` Rob Clark
2017-06-26 12:43 [PATCH 0/4] iommu: add qcom_iommu for early "B" family devices Rob Clark
2017-06-26 12:43 ` [PATCH 4/4] iommu: qcom: initialize secure page table Rob Clark
2017-05-25 17:33 [PATCH 0/4] iommu: add qcom_iommu for early "B" family devices Rob Clark
2017-05-25 17:33 ` [PATCH 4/4] iommu: qcom: initialize secure page table Rob Clark
2017-05-04 13:34 [PATCH 0/4] iommu: add qcom_iommu for early "B" family devices (v3) Rob Clark
2017-05-04 13:34 ` [PATCH 4/4] iommu: qcom: initialize secure page table Rob Clark

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170601135849.14978-5-robdclark@gmail.com \
    --to=robdclark@gmail.com \
    --cc=architt@codeaurora.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=sricharan@codeaurora.org \
    --cc=stanimir.varbanov@linaro.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.