From: Leon Romanovsky <leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Parav Pandit <parav-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Subject: [PATCH rdma-next] IB/mlx5: Expose extended error counters
Date: Mon, 19 Jun 2017 07:19:37 +0300 [thread overview]
Message-ID: <20170619041937.10120-1-leon@kernel.org> (raw)
From: Parav Pandit <parav-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
This patch adds below requester and responder side error counters,
which will be exposed by hardware counters interface and are supported
as part of query Q counters command extension.
+---------------------------+-------------------------------------+
| Name | Description |
|---------------------------+-------------------------------------|
|resp_local_length_error | Number of times responder detected |
| | local length errors |
|---------------------------+-------------------------------------|
|resp_cqe_error | Number of CQEs completed with error |
| | at responder |
|---------------------------+-------------------------------------|
|req_cqe_error | Number of CQEs completed with error |
| | at requester |
|---------------------------+-------------------------------------|
|req_remote_invalid_request | Number of times requester detected |
| | remote invalid request error |
|---------------------------+-------------------------------------|
|req_remote_access_error | Number of times requester detected |
| | remote access error |
|---------------------------+-------------------------------------|
|resp_remote_access_error | Number of times responder detected |
| | remote access error |
|---------------------------+-------------------------------------|
|resp_cqe_flush_error | Number of CQEs completed with |
| | flushed with error at responder |
|---------------------------+-------------------------------------|
|req_cqe_flush_error | Number of CQEs completed with |
| | flushed with error at requester |
+---------------------------+-------------------------------------+
Signed-off-by: Parav Pandit <parav-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Reviewed-by: Daniel Jurgens <danielj-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Reviewed-by: Eli Cohen <eli-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Signed-off-by: Leon Romanovsky <leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
drivers/infiniband/hw/mlx5/main.c | 22 ++++++++++++++++++++
include/linux/mlx5/mlx5_ifc.h | 44 +++++++++++++++++++++++++++++++++++++--
2 files changed, 64 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index 9f3ba320ce70..2f3775d99a7c 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -3315,6 +3315,17 @@ static const struct mlx5_ib_counter cong_cnts[] = {
INIT_CONG_COUNTER(np_cnp_sent),
};
+static const struct mlx5_ib_counter extended_err_cnts[] = {
+ INIT_Q_COUNTER(resp_local_length_error),
+ INIT_Q_COUNTER(resp_cqe_error),
+ INIT_Q_COUNTER(req_cqe_error),
+ INIT_Q_COUNTER(req_remote_invalid_request),
+ INIT_Q_COUNTER(req_remote_access_errors),
+ INIT_Q_COUNTER(resp_remote_access_errors),
+ INIT_Q_COUNTER(resp_cqe_flush_error),
+ INIT_Q_COUNTER(req_cqe_flush_error),
+};
+
static void mlx5_ib_dealloc_counters(struct mlx5_ib_dev *dev)
{
unsigned int i;
@@ -3339,6 +3350,10 @@ static int __mlx5_ib_alloc_counters(struct mlx5_ib_dev *dev,
if (MLX5_CAP_GEN(dev->mdev, retransmission_q_counters))
num_counters += ARRAY_SIZE(retrans_q_cnts);
+
+ if (MLX5_CAP_GEN(dev->mdev, enhanced_error_q_counters))
+ num_counters += ARRAY_SIZE(extended_err_cnts);
+
cnts->num_q_counters = num_counters;
if (MLX5_CAP_GEN(dev->mdev, cc_query_allowed)) {
@@ -3388,6 +3403,13 @@ static void mlx5_ib_fill_counters(struct mlx5_ib_dev *dev,
}
}
+ if (MLX5_CAP_GEN(dev->mdev, enhanced_error_q_counters)) {
+ for (i = 0; i < ARRAY_SIZE(extended_err_cnts); i++, j++) {
+ names[j] = extended_err_cnts[i].name;
+ offsets[j] = extended_err_cnts[i].offset;
+ }
+ }
+
if (MLX5_CAP_GEN(dev->mdev, cc_query_allowed)) {
for (i = 0; i < ARRAY_SIZE(cong_cnts); i++, j++) {
names[j] = cong_cnts[i].name;
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 32de0724b400..adcb3c3c9f79 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -838,7 +838,7 @@ struct mlx5_ifc_cmd_hca_cap_bits {
u8 pcam_reg[0x1];
u8 local_ca_ack_delay[0x5];
u8 port_module_event[0x1];
- u8 reserved_at_1b1[0x1];
+ u8 enhanced_error_q_counters[0x1];
u8 ports_check[0x1];
u8 reserved_at_1b3[0x1];
u8 disable_link_up[0x1];
@@ -3916,7 +3916,47 @@ struct mlx5_ifc_query_q_counter_out_bits {
u8 local_ack_timeout_err[0x20];
- u8 reserved_at_320[0x4e0];
+ u8 reserved_at_320[0xa0];
+
+ u8 resp_local_length_error[0x20];
+
+ u8 req_local_length_error[0x20];
+
+ u8 resp_local_qp_error[0x20];
+
+ u8 local_operation_error[0x20];
+
+ u8 resp_local_protection[0x20];
+
+ u8 req_local_protection[0x20];
+
+ u8 resp_cqe_error[0x20];
+
+ u8 req_cqe_error[0x20];
+
+ u8 req_mw_binding[0x20];
+
+ u8 req_bad_response[0x20];
+
+ u8 req_remote_invalid_request[0x20];
+
+ u8 resp_remote_invalid_request[0x20];
+
+ u8 req_remote_access_errors[0x20];
+
+ u8 resp_remote_access_errors[0x20];
+
+ u8 req_remote_operation_errors[0x20];
+
+ u8 req_transport_retries_exceeded[0x20];
+
+ u8 cq_overflow[0x20];
+
+ u8 resp_cqe_flush_error[0x20];
+
+ u8 req_cqe_flush_error[0x20];
+
+ u8 reserved_at_620[0x1e0];
};
struct mlx5_ifc_query_q_counter_in_bits {
--
2.12.2
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-06-19 4:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-19 4:19 Leon Romanovsky [this message]
[not found] ` <20170619041937.10120-1-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-07-28 18:26 ` [PATCH rdma-next] IB/mlx5: Expose extended error counters Doug Ledford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170619041937.10120-1-leon@kernel.org \
--to=leon-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=parav-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.