From: Daniel Scheller <d.scheller.oss@gmail.com>
To: linux-media@vger.kernel.org, mchehab@kernel.org,
mchehab@s-opensource.com
Cc: rjkm@metzlerbros.de, jasmin@anw.at
Subject: [PATCH 6/9] [media] dvb-frontends: add ST STV6111 DVB-S/S2 tuner frontend driver
Date: Sat, 24 Jun 2017 18:02:58 +0200 [thread overview]
Message-ID: <20170624160301.17710-7-d.scheller.oss@gmail.com> (raw)
In-Reply-To: <20170624160301.17710-1-d.scheller.oss@gmail.com>
From: Daniel Scheller <d.scheller@gmx.net>
This adds a frontend driver for the ST STV6111 DVB-S/S2 tuners. Like the
stv0910 demod frontend driver, this driver originates from the Digital
Devices' dddvb vendor driver package as of version 0.9.29, and was cleaned
up aswell. No functionality had to be removed though. For the same
maintainability reasons, any camel case has been left intact so merges
between upstream and in-kernel can be done easier.
Permission to reuse and mainline the driver code was formally granted by
Ralph Metzler <rjkm@metzlerbros.de>.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
---
drivers/media/dvb-frontends/Kconfig | 9 +
drivers/media/dvb-frontends/Makefile | 1 +
drivers/media/dvb-frontends/stv6111.c | 675 ++++++++++++++++++++++++++++++++++
drivers/media/dvb-frontends/stv6111.h | 20 +
4 files changed, 705 insertions(+)
create mode 100644 drivers/media/dvb-frontends/stv6111.c
create mode 100644 drivers/media/dvb-frontends/stv6111.h
diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig
index 773de5e264e3..d2d3160abdf7 100644
--- a/drivers/media/dvb-frontends/Kconfig
+++ b/drivers/media/dvb-frontends/Kconfig
@@ -44,6 +44,15 @@ config DVB_STV6110x
help
A Silicon tuner that supports DVB-S and DVB-S2 modes
+config DVB_STV6111
+ tristate "STV6111 based tuners"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A Silicon tuner that supports DVB-S and DVB-S2 modes
+
+ Say Y when you want to support these frontends.
+
config DVB_M88DS3103
tristate "Montage Technology M88DS3103"
depends on DVB_CORE && I2C && I2C_MUX
diff --git a/drivers/media/dvb-frontends/Makefile b/drivers/media/dvb-frontends/Makefile
index c302b2d07499..e8bf1d873485 100644
--- a/drivers/media/dvb-frontends/Makefile
+++ b/drivers/media/dvb-frontends/Makefile
@@ -111,6 +111,7 @@ obj-$(CONFIG_DVB_CXD2841ER) += cxd2841er.o
obj-$(CONFIG_DVB_DRXK) += drxk.o
obj-$(CONFIG_DVB_TDA18271C2DD) += tda18271c2dd.o
obj-$(CONFIG_DVB_STV0910) += stv0910.o
+obj-$(CONFIG_DVB_STV6111) += stv6111.o
obj-$(CONFIG_DVB_SI2165) += si2165.o
obj-$(CONFIG_DVB_A8293) += a8293.o
obj-$(CONFIG_DVB_SP2) += sp2.o
diff --git a/drivers/media/dvb-frontends/stv6111.c b/drivers/media/dvb-frontends/stv6111.c
new file mode 100644
index 000000000000..61a4af5ea4ce
--- /dev/null
+++ b/drivers/media/dvb-frontends/stv6111.c
@@ -0,0 +1,675 @@
+/*
+ * Driver for the ST STV6111 tuner
+ *
+ * Copyright (C) 2014 Digital Devices GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <asm/div64.h>
+
+#include "dvb_frontend.h"
+
+struct stv {
+ struct i2c_adapter *i2c;
+ u8 adr;
+
+ u8 reg[11];
+ u32 ref_freq;
+ u32 Frequency;
+};
+
+struct SLookup {
+ s16 Value;
+ u16 RegValue;
+};
+
+static struct SLookup LNAGain_NF_LookUp[] = {
+ /*Gain *100dB*/ /*Reg*/
+ { 2572, 0 },
+ { 2575, 1 },
+ { 2580, 2 },
+ { 2588, 3 },
+ { 2596, 4 },
+ { 2611, 5 },
+ { 2633, 6 },
+ { 2664, 7 },
+ { 2701, 8 },
+ { 2753, 9 },
+ { 2816, 10 },
+ { 2902, 11 },
+ { 2995, 12 },
+ { 3104, 13 },
+ { 3215, 14 },
+ { 3337, 15 },
+ { 3492, 16 },
+ { 3614, 17 },
+ { 3731, 18 },
+ { 3861, 19 },
+ { 3988, 20 },
+ { 4124, 21 },
+ { 4253, 22 },
+ { 4386, 23 },
+ { 4505, 24 },
+ { 4623, 25 },
+ { 4726, 26 },
+ { 4821, 27 },
+ { 4903, 28 },
+ { 4979, 29 },
+ { 5045, 30 },
+ { 5102, 31 }
+};
+
+static struct SLookup LNAGain_IIP3_LookUp[] = {
+ /*Gain *100dB*/ /*reg*/
+ { 1548, 0 },
+ { 1552, 1 },
+ { 1569, 2 },
+ { 1565, 3 },
+ { 1577, 4 },
+ { 1594, 5 },
+ { 1627, 6 },
+ { 1656, 7 },
+ { 1700, 8 },
+ { 1748, 9 },
+ { 1805, 10 },
+ { 1896, 11 },
+ { 1995, 12 },
+ { 2113, 13 },
+ { 2233, 14 },
+ { 2366, 15 },
+ { 2543, 16 },
+ { 2687, 17 },
+ { 2842, 18 },
+ { 2999, 19 },
+ { 3167, 20 },
+ { 3342, 21 },
+ { 3507, 22 },
+ { 3679, 23 },
+ { 3827, 24 },
+ { 3970, 25 },
+ { 4094, 26 },
+ { 4210, 27 },
+ { 4308, 28 },
+ { 4396, 29 },
+ { 4468, 30 },
+ { 4535, 31 }
+};
+
+static struct SLookup Gain_RFAGC_LookUp[] = {
+ /*Gain *100dB*/ /*reg*/
+ { 4870, 0x3000 },
+ { 4850, 0x3C00 },
+ { 4800, 0x4500 },
+ { 4750, 0x4800 },
+ { 4700, 0x4B00 },
+ { 4650, 0x4D00 },
+ { 4600, 0x4F00 },
+ { 4550, 0x5100 },
+ { 4500, 0x5200 },
+ { 4420, 0x5500 },
+ { 4316, 0x5800 },
+ { 4200, 0x5B00 },
+ { 4119, 0x5D00 },
+ { 3999, 0x6000 },
+ { 3950, 0x6100 },
+ { 3876, 0x6300 },
+ { 3755, 0x6600 },
+ { 3641, 0x6900 },
+ { 3567, 0x6B00 },
+ { 3425, 0x6F00 },
+ { 3350, 0x7100 },
+ { 3236, 0x7400 },
+ { 3118, 0x7700 },
+ { 3004, 0x7A00 },
+ { 2917, 0x7C00 },
+ { 2776, 0x7F00 },
+ { 2635, 0x8200 },
+ { 2516, 0x8500 },
+ { 2406, 0x8800 },
+ { 2290, 0x8B00 },
+ { 2170, 0x8E00 },
+ { 2073, 0x9100 },
+ { 1949, 0x9400 },
+ { 1836, 0x9700 },
+ { 1712, 0x9A00 },
+ { 1631, 0x9C00 },
+ { 1515, 0x9F00 },
+ { 1400, 0xA200 },
+ { 1323, 0xA400 },
+ { 1203, 0xA700 },
+ { 1091, 0xAA00 },
+ { 1011, 0xAC00 },
+ { 904, 0xAF00 },
+ { 787, 0xB200 },
+ { 685, 0xB500 },
+ { 571, 0xB800 },
+ { 464, 0xBB00 },
+ { 374, 0xBE00 },
+ { 275, 0xC200 },
+ { 181, 0xC600 },
+ { 102, 0xCC00 },
+ { 49, 0xD900 }
+};
+
+/*
+ * This table is 6 dB too low comapred to the others (probably created with
+ * a different BB_MAG setting)
+ */
+static struct SLookup Gain_Channel_AGC_NF_LookUp[] = {
+ /*Gain *100dB*/ /*reg*/
+ { 7082, 0x3000 },
+ { 7052, 0x4000 },
+ { 7007, 0x4600 },
+ { 6954, 0x4A00 },
+ { 6909, 0x4D00 },
+ { 6833, 0x5100 },
+ { 6753, 0x5400 },
+ { 6659, 0x5700 },
+ { 6561, 0x5A00 },
+ { 6472, 0x5C00 },
+ { 6366, 0x5F00 },
+ { 6259, 0x6100 },
+ { 6151, 0x6400 },
+ { 6026, 0x6700 },
+ { 5920, 0x6900 },
+ { 5835, 0x6B00 },
+ { 5770, 0x6C00 },
+ { 5681, 0x6E00 },
+ { 5596, 0x7000 },
+ { 5503, 0x7200 },
+ { 5429, 0x7300 },
+ { 5319, 0x7500 },
+ { 5220, 0x7700 },
+ { 5111, 0x7900 },
+ { 4983, 0x7B00 },
+ { 4876, 0x7D00 },
+ { 4755, 0x7F00 },
+ { 4635, 0x8100 },
+ { 4499, 0x8300 },
+ { 4405, 0x8500 },
+ { 4323, 0x8600 },
+ { 4233, 0x8800 },
+ { 4156, 0x8A00 },
+ { 4038, 0x8C00 },
+ { 3935, 0x8E00 },
+ { 3823, 0x9000 },
+ { 3712, 0x9200 },
+ { 3601, 0x9500 },
+ { 3511, 0x9700 },
+ { 3413, 0x9900 },
+ { 3309, 0x9B00 },
+ { 3213, 0x9D00 },
+ { 3088, 0x9F00 },
+ { 2992, 0xA100 },
+ { 2878, 0xA400 },
+ { 2769, 0xA700 },
+ { 2645, 0xAA00 },
+ { 2538, 0xAD00 },
+ { 2441, 0xB000 },
+ { 2350, 0xB600 },
+ { 2237, 0xBA00 },
+ { 2137, 0xBF00 },
+ { 2039, 0xC500 },
+ { 1938, 0xDF00 },
+ { 1927, 0xFF00 }
+};
+
+static struct SLookup Gain_Channel_AGC_IIP3_LookUp[] = {
+ /*Gain *100dB*/ /*reg*/
+ { 7070, 0x3000 },
+ { 7028, 0x4000 },
+ { 7019, 0x4600 },
+ { 6900, 0x4A00 },
+ { 6811, 0x4D00 },
+ { 6763, 0x5100 },
+ { 6690, 0x5400 },
+ { 6644, 0x5700 },
+ { 6617, 0x5A00 },
+ { 6598, 0x5C00 },
+ { 6462, 0x5F00 },
+ { 6348, 0x6100 },
+ { 6197, 0x6400 },
+ { 6154, 0x6700 },
+ { 6098, 0x6900 },
+ { 5893, 0x6B00 },
+ { 5812, 0x6C00 },
+ { 5773, 0x6E00 },
+ { 5723, 0x7000 },
+ { 5661, 0x7200 },
+ { 5579, 0x7300 },
+ { 5460, 0x7500 },
+ { 5308, 0x7700 },
+ { 5099, 0x7900 },
+ { 4910, 0x7B00 },
+ { 4800, 0x7D00 },
+ { 4785, 0x7F00 },
+ { 4635, 0x8100 },
+ { 4466, 0x8300 },
+ { 4314, 0x8500 },
+ { 4295, 0x8600 },
+ { 4144, 0x8800 },
+ { 3920, 0x8A00 },
+ { 3889, 0x8C00 },
+ { 3771, 0x8E00 },
+ { 3655, 0x9000 },
+ { 3446, 0x9200 },
+ { 3298, 0x9500 },
+ { 3083, 0x9700 },
+ { 3015, 0x9900 },
+ { 2833, 0x9B00 },
+ { 2746, 0x9D00 },
+ { 2632, 0x9F00 },
+ { 2598, 0xA100 },
+ { 2480, 0xA400 },
+ { 2236, 0xA700 },
+ { 2171, 0xAA00 },
+ { 2060, 0xAD00 },
+ { 1999, 0xB000 },
+ { 1974, 0xB600 },
+ { 1820, 0xBA00 },
+ { 1741, 0xBF00 },
+ { 1655, 0xC500 },
+ { 1444, 0xDF00 },
+ { 1325, 0xFF00 },
+};
+
+static inline u32 MulDiv32(u32 a, u32 b, u32 c)
+{
+ u64 tmp64;
+
+ tmp64 = (u64)a * (u64)b;
+ do_div(tmp64, c);
+
+ return (u32) tmp64;
+}
+
+static int i2c_read(struct i2c_adapter *adap,
+ u8 adr, u8 *msg, int len, u8 *answ, int alen)
+{
+ struct i2c_msg msgs[2] = { { .addr = adr, .flags = 0,
+ .buf = msg, .len = len},
+ { .addr = adr, .flags = I2C_M_RD,
+ .buf = answ, .len = alen } };
+ if (i2c_transfer(adap, msgs, 2) != 2) {
+ pr_err("i2c read error\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+static int i2c_write(struct i2c_adapter *adap, u8 adr, u8 *data, int len)
+{
+ struct i2c_msg msg = {.addr = adr, .flags = 0,
+ .buf = data, .len = len};
+
+ if (i2c_transfer(adap, &msg, 1) != 1) {
+ pr_err("i2c write error\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+static int write_regs(struct stv *state, int reg, int len)
+{
+ u8 d[12];
+
+ memcpy(&d[1], &state->reg[reg], len);
+ d[0] = reg;
+ return i2c_write(state->i2c, state->adr, d, len + 1);
+}
+
+static int write_reg(struct stv *state, u8 reg, u8 val)
+{
+ u8 d[2] = {reg, val};
+
+ return i2c_write(state->i2c, state->adr, d, 2);
+}
+
+static int read_reg(struct stv *state, u8 reg, u8 *val)
+{
+ return i2c_read(state->i2c, state->adr, ®, 1, val, 1);
+}
+
+static int wait_for_call_done(struct stv *state, u8 mask)
+{
+ int status = 0;
+ u32 LockRetryCount = 10;
+
+ while (LockRetryCount > 0) {
+ u8 Status;
+
+ status = read_reg(state, 9, &Status);
+ if (status < 0)
+ return status;
+
+ if ((Status & mask) == 0)
+ break;
+ usleep_range(4000, 6000);
+ LockRetryCount -= 1;
+
+ status = -EIO;
+ }
+ return status;
+}
+
+static void init_state(struct stv *state)
+{
+ u32 clkdiv = 0;
+ u32 agcmode = 0;
+ u32 agcref = 2;
+ u32 agcset = 0xffffffff;
+ u32 bbmode = 0xffffffff;
+
+ state->reg[0] = 0x08;
+ state->reg[1] = 0x41;
+ state->reg[2] = 0x8f;
+ state->reg[3] = 0x00;
+ state->reg[4] = 0xce;
+ state->reg[5] = 0x54;
+ state->reg[6] = 0x55;
+ state->reg[7] = 0x45;
+ state->reg[8] = 0x46;
+ state->reg[9] = 0xbd;
+ state->reg[10] = 0x11;
+
+ state->ref_freq = 16000;
+
+ if (clkdiv <= 3)
+ state->reg[0x00] |= (clkdiv & 0x03);
+ if (agcmode <= 3) {
+ state->reg[0x03] |= (agcmode << 5);
+ if (agcmode == 0x01)
+ state->reg[0x01] |= 0x30;
+ }
+ if (bbmode <= 3)
+ state->reg[0x01] = (state->reg[0x01] & ~0x30) | (bbmode << 4);
+ if (agcref <= 7)
+ state->reg[0x03] |= agcref;
+ if (agcset <= 31)
+ state->reg[0x02] = (state->reg[0x02] & ~0x1F) | agcset | 0x40;
+}
+
+static int attach_init(struct stv *state)
+{
+ if (write_regs(state, 0, 11))
+ return -ENODEV;
+ return 0;
+}
+
+static void release(struct dvb_frontend *fe)
+{
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+}
+
+static int set_bandwidth(struct dvb_frontend *fe, u32 CutOffFrequency)
+{
+ struct stv *state = fe->tuner_priv;
+ u32 index = (CutOffFrequency + 999999) / 1000000;
+
+ if (index < 6)
+ index = 6;
+ if (index > 50)
+ index = 50;
+ if ((state->reg[0x08] & ~0xFC) == ((index-6) << 2))
+ return 0;
+
+ state->reg[0x08] = (state->reg[0x08] & ~0xFC) | ((index-6) << 2);
+ state->reg[0x09] = (state->reg[0x09] & ~0x0C) | 0x08;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ write_regs(state, 0x08, 2);
+ wait_for_call_done(state, 0x08);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ return 0;
+}
+
+static int set_lof(struct stv *state, u32 LocalFrequency, u32 CutOffFrequency)
+{
+ u32 index = (CutOffFrequency + 999999) / 1000000;
+ u32 Frequency = (LocalFrequency + 500) / 1000;
+ u32 p = 1, psel = 0, fvco, div, frac;
+ u8 Icp, tmp;
+
+ if (index < 6)
+ index = 6;
+ if (index > 50)
+ index = 50;
+
+ if (Frequency <= 1300000) {
+ p = 4;
+ psel = 1;
+ } else {
+ p = 2;
+ psel = 0;
+ }
+ fvco = Frequency * p;
+ div = fvco / state->ref_freq;
+ frac = fvco % state->ref_freq;
+ frac = MulDiv32(frac, 0x40000, state->ref_freq);
+
+ Icp = 0;
+ if (fvco < 2700000)
+ Icp = 0;
+ else if (fvco < 2950000)
+ Icp = 1;
+ else if (fvco < 3300000)
+ Icp = 2;
+ else if (fvco < 3700000)
+ Icp = 3;
+ else if (fvco < 4200000)
+ Icp = 5;
+ else if (fvco < 4800000)
+ Icp = 6;
+ else
+ Icp = 7;
+
+ state->reg[0x02] |= 0x80; /* LNA IIP3 Mode */
+
+ state->reg[0x03] = (state->reg[0x03] & ~0x80) | (psel << 7);
+ state->reg[0x04] = (div & 0xFF);
+ state->reg[0x05] = (((div >> 8) & 0x01) | ((frac & 0x7F) << 1)) & 0xff;
+ state->reg[0x06] = ((frac >> 7) & 0xFF);
+ state->reg[0x07] = (state->reg[0x07] & ~0x07) | ((frac >> 15) & 0x07);
+ state->reg[0x07] = (state->reg[0x07] & ~0xE0) | (Icp << 5);
+
+ state->reg[0x08] = (state->reg[0x08] & ~0xFC) | ((index - 6) << 2);
+ /* Start cal vco,CF */
+ state->reg[0x09] = (state->reg[0x09] & ~0x0C) | 0x0C;
+ write_regs(state, 2, 8);
+
+ wait_for_call_done(state, 0x0C);
+
+ usleep_range(10000, 12000);
+
+ read_reg(state, 0x03, &tmp);
+ if (tmp & 0x10) {
+ state->reg[0x02] &= ~0x80; /* LNA NF Mode */
+ write_regs(state, 2, 1);
+ }
+ read_reg(state, 0x08, &tmp);
+
+ state->Frequency = Frequency;
+
+ return 0;
+}
+
+static int set_params(struct dvb_frontend *fe)
+{
+ struct stv *state = fe->tuner_priv;
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ u32 freq, symb, cutoff;
+
+ if (p->delivery_system != SYS_DVBS && p->delivery_system != SYS_DVBS2)
+ return -EINVAL;
+
+ freq = p->frequency * 1000;
+ symb = p->symbol_rate;
+ cutoff = 5000000 + MulDiv32(p->symbol_rate, 135, 200);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ set_lof(state, freq, cutoff);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ return 0;
+}
+
+static s32 TableLookup(struct SLookup *Table, int TableSize, u16 RegValue)
+{
+ s32 Gain;
+ s32 RegDiff;
+ int imin = 0;
+ int imax = TableSize - 1;
+ int i;
+
+ /* Assumes Table[0].RegValue < Table[imax].RegValue */
+ if (RegValue <= Table[0].RegValue)
+ Gain = Table[0].Value;
+ else if (RegValue >= Table[imax].RegValue)
+ Gain = Table[imax].Value;
+ else {
+ while (imax-imin > 1) {
+ i = (imax + imin) / 2;
+ if ((Table[imin].RegValue <= RegValue) &&
+ (RegValue <= Table[i].RegValue))
+ imax = i;
+ else
+ imin = i;
+ }
+ RegDiff = Table[imax].RegValue - Table[imin].RegValue;
+ Gain = Table[imin].Value;
+ if (RegDiff != 0)
+ Gain += ((s32) (RegValue - Table[imin].RegValue) *
+ (s32)(Table[imax].Value
+ - Table[imin].Value))/(RegDiff);
+ }
+ return Gain;
+}
+
+static int get_rf_strength(struct dvb_frontend *fe, u16 *st)
+{
+ struct stv *state = fe->tuner_priv;
+ u16 RFAgc = *st;
+ s32 Gain;
+
+ if ((state->reg[0x03] & 0x60) == 0) {
+ /* RF Mode, Read AGC ADC */
+ u8 Reg = 0;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ write_reg(state, 0x02, state->reg[0x02] | 0x20);
+ read_reg(state, 2, &Reg);
+ if (Reg & 0x20)
+ read_reg(state, 2, &Reg);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ if ((state->reg[0x02] & 0x80) == 0)
+ /* NF */
+ Gain = TableLookup(LNAGain_NF_LookUp,
+ ARRAY_SIZE(LNAGain_NF_LookUp), Reg & 0x1F);
+ else
+ /* IIP3 */
+ Gain = TableLookup(LNAGain_IIP3_LookUp,
+ ARRAY_SIZE(LNAGain_IIP3_LookUp), Reg & 0x1F);
+
+ Gain += TableLookup(Gain_RFAGC_LookUp,
+ ARRAY_SIZE(Gain_RFAGC_LookUp), RFAgc);
+ Gain -= 2400;
+ } else {
+ /* Channel Mode */
+ if ((state->reg[0x02] & 0x80) == 0) {
+ /* NF */
+ Gain = TableLookup(Gain_Channel_AGC_NF_LookUp,
+ ARRAY_SIZE(Gain_Channel_AGC_NF_LookUp), RFAgc);
+ Gain += 600;
+ } else {
+ /* IIP3 */
+ Gain = TableLookup(Gain_Channel_AGC_IIP3_LookUp,
+ ARRAY_SIZE(Gain_Channel_AGC_IIP3_LookUp),
+ RFAgc);
+ }
+ }
+
+ if (state->Frequency > 0)
+ /* Tilt correction ( 0.00016 dB/MHz ) */
+ Gain -= ((((s32)(state->Frequency / 1000) - 1550) * 2) / 12);
+
+ /* + (BBGain * 10); */
+ Gain += (s32)((state->reg[0x01] & 0xC0) >> 6) * 600 - 1300;
+
+ if (Gain < 0)
+ Gain = 0;
+ else if (Gain > 10000)
+ Gain = 10000;
+
+ *st = 10000 - Gain;
+
+ return 0;
+}
+
+static struct dvb_tuner_ops tuner_ops = {
+ .info = {
+ .name = "STV6111",
+ .frequency_min = 950000,
+ .frequency_max = 2150000,
+ .frequency_step = 0
+ },
+ .set_params = set_params,
+ .release = release,
+ .get_rf_strength = get_rf_strength,
+ .set_bandwidth = set_bandwidth,
+};
+
+struct dvb_frontend *stv6111_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c, u8 adr)
+{
+ struct stv *state;
+ int stat;
+
+ state = kzalloc(sizeof(struct stv), GFP_KERNEL);
+ if (!state)
+ return NULL;
+ state->adr = adr;
+ state->i2c = i2c;
+ memcpy(&fe->ops.tuner_ops, &tuner_ops, sizeof(struct dvb_tuner_ops));
+ init_state(state);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ stat = attach_init(state);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ if (stat < 0) {
+ kfree(state);
+ return 0;
+ }
+ fe->tuner_priv = state;
+ return fe;
+}
+EXPORT_SYMBOL_GPL(stv6111_attach);
+
+MODULE_DESCRIPTION("STV6111 driver");
+MODULE_AUTHOR("Ralph Metzler, Manfred Voelkel");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb-frontends/stv6111.h b/drivers/media/dvb-frontends/stv6111.h
new file mode 100644
index 000000000000..066dd70c9426
--- /dev/null
+++ b/drivers/media/dvb-frontends/stv6111.h
@@ -0,0 +1,20 @@
+#ifndef _STV6111_H_
+#define _STV6111_H_
+
+#if IS_REACHABLE(CONFIG_DVB_STV6111)
+
+extern struct dvb_frontend *stv6111_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c, u8 adr);
+
+#else
+
+static inline struct dvb_frontend *stv6111_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c, u8 adr)
+{
+ pr_warn("%s: Driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+
+#endif /* CONFIG_DVB_STV6111 */
+
+#endif /* _STV6111_H_ */
--
2.13.0
next prev parent reply other threads:[~2017-06-24 16:03 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-24 16:02 [PATCH 0/9] STV0910/STV6111 drivers, ddbridge CineS2 V7 support Daniel Scheller
2017-06-24 16:02 ` [PATCH 1/9] [media] dvb-frontends: add ST STV0910 DVB-S/S2 demodulator frontend driver Daniel Scheller
2017-06-24 16:02 ` [PATCH 2/9] [media] dvb-frontends/stv0910: Fix possible buffer overflow Daniel Scheller
2017-06-24 16:02 ` [PATCH 3/9] [media] dvb-frontends/stv0910: add multistream (ISI) and PLS capabilities Daniel Scheller
2017-06-24 16:02 ` [PATCH 4/9] [media] dvb-frontends/stv0910: Fix signal strength reporting Daniel Scheller
2017-06-26 8:55 ` Ralph Metzler
2017-06-26 10:00 ` Mauro Carvalho Chehab
2017-06-26 10:14 ` Ralph Metzler
2017-06-26 15:39 ` Daniel Scheller
2017-06-24 16:02 ` [PATCH 5/9] [media] dvb-frontends/stv0910: Add missing set_frontend fe-op Daniel Scheller
2017-06-24 16:02 ` Daniel Scheller [this message]
2017-06-24 16:02 ` [PATCH 7/9] [media] ddbridge: return stv09xx id in port_has_stv0900_aa() Daniel Scheller
2017-06-24 16:03 ` [PATCH 8/9] [media] ddbridge: support for CineS2 V7(A) and DuoFlex S2 V4 hardware Daniel Scheller
2017-06-24 16:03 ` [PATCH 9/9] [media] ddbridge: stv0910 single demod mode module option Daniel Scheller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170624160301.17710-7-d.scheller.oss@gmail.com \
--to=d.scheller.oss@gmail.com \
--cc=jasmin@anw.at \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mchehab@s-opensource.com \
--cc=rjkm@metzlerbros.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.