From: Daniel Scheller <d.scheller.oss@gmail.com>
To: linux-media@vger.kernel.org, mchehab@kernel.org,
mchehab@s-opensource.com
Cc: liplianin@netup.ru, rjkm@metzlerbros.de, crope@iki.fi
Subject: [PATCH v3 2/4] [media] dvb-frontends/stv0367: SNR DVBv5 statistics for DVB-C and T
Date: Sun, 25 Jun 2017 13:26:44 +0200 [thread overview]
Message-ID: <20170625112646.7973-3-d.scheller.oss@gmail.com> (raw)
In-Reply-To: <20170625112646.7973-1-d.scheller.oss@gmail.com>
From: Daniel Scheller <d.scheller@gmx.net>
Add signal-to-noise-ratio as provided by the demodulator in decibel scale.
QAM/DVB-C needs some intlog calculation to have usable dB values, OFDM/
DVB-T values from the demod look alright already and are provided as-is.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
---
drivers/media/dvb-frontends/stv0367.c | 39 +++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/drivers/media/dvb-frontends/stv0367.c b/drivers/media/dvb-frontends/stv0367.c
index 9e5432b761b5..138f859d0f25 100644
--- a/drivers/media/dvb-frontends/stv0367.c
+++ b/drivers/media/dvb-frontends/stv0367.c
@@ -25,6 +25,8 @@
#include <linux/slab.h>
#include <linux/i2c.h>
+#include "dvb_math.h"
+
#include "stv0367.h"
#include "stv0367_defs.h"
#include "stv0367_regs.h"
@@ -3009,6 +3011,37 @@ static int stv0367ddb_set_frontend(struct dvb_frontend *fe)
return -EINVAL;
}
+static void stv0367ddb_read_snr(struct dvb_frontend *fe)
+{
+ struct stv0367_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ int cab_pwr;
+ u32 regval, tmpval, snrval = 0;
+
+ switch (state->activedemod) {
+ case demod_ter:
+ snrval = stv0367ter_snr_readreg(fe);
+ break;
+ case demod_cab:
+ cab_pwr = stv0367cab_snr_power(fe);
+ regval = stv0367cab_snr_readreg(fe, 0);
+
+ /* prevent division by zero */
+ if (!regval)
+ snrval = 0;
+
+ tmpval = (cab_pwr * 320) / regval;
+ snrval = ((tmpval != 0) ? (intlog2(tmpval) / 5581) : 0);
+ break;
+ default:
+ p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ return;
+ }
+
+ p->cnr.stat[0].scale = FE_SCALE_DECIBEL;
+ p->cnr.stat[0].uvalue = snrval;
+}
+
static void stv0367ddb_read_ucblocks(struct dvb_frontend *fe)
{
struct stv0367_state *state = fe->demodulator_priv;
@@ -3053,6 +3086,12 @@ static int stv0367ddb_read_status(struct dvb_frontend *fe,
if (ret)
return ret;
+ /* read carrier/noise when a carrier is detected */
+ if (*status & FE_HAS_CARRIER)
+ stv0367ddb_read_snr(fe);
+ else
+ p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+
/* stop if demod isn't locked */
if (!(*status & FE_HAS_LOCK)) {
p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
--
2.13.0
next prev parent reply other threads:[~2017-06-25 11:26 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-25 11:26 [PATCH v3 0/4] STV0367/DDB DVBv5 signal statistics Daniel Scheller
2017-06-25 11:26 ` [PATCH v3 1/4] [media] dvb-frontends/stv0367: Improve DVB-C/T frontend status Daniel Scheller
2017-06-25 11:26 ` Daniel Scheller [this message]
2017-06-25 11:26 ` [PATCH v3 3/4] [media] dvb-frontends/stv0367: DVB-C signal strength statistics Daniel Scheller
2017-06-25 11:26 ` [PATCH v3 4/4] [media] dvb-frontends/stv0367: update UCB readout condition logic Daniel Scheller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170625112646.7973-3-d.scheller.oss@gmail.com \
--to=d.scheller.oss@gmail.com \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=liplianin@netup.ru \
--cc=mchehab@kernel.org \
--cc=mchehab@s-opensource.com \
--cc=rjkm@metzlerbros.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.