From: Oliver O'Halloran <oohall@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Oliver O'Halloran <oohall@gmail.com>
Subject: [PATCH v4 3/6] powerpc/vmemmap: Add altmap support
Date: Wed, 28 Jun 2017 11:32:33 +1000 [thread overview]
Message-ID: <20170628013236.413-3-oohall@gmail.com> (raw)
In-Reply-To: <20170628013236.413-1-oohall@gmail.com>
Adds support to powerpc for the altmap feature of ZONE_DEVICE memory. An
altmap is a driver provided region that is used to provide the backing
storage for the struct pages of ZONE_DEVICE memory. In situations where
large amount of ZONE_DEVICE memory is being added to the system the
altmap reduces pressure on main system memory by allowing the mm/
metadata to be stored on the device itself rather in main memory.
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
---
arch/powerpc/mm/init_64.c | 15 +++++++++++++--
arch/powerpc/mm/mem.c | 16 +++++++++++++---
2 files changed, 26 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 8851e4f5dbab..225fbb8034e6 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -44,6 +44,7 @@
#include <linux/slab.h>
#include <linux/of_fdt.h>
#include <linux/libfdt.h>
+#include <linux/memremap.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
@@ -171,13 +172,17 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node)
pr_debug("vmemmap_populate %lx..%lx, node %d\n", start, end, node);
for (; start < end; start += page_size) {
+ struct vmem_altmap *altmap;
void *p;
int rc;
if (vmemmap_populated(start, page_size))
continue;
- p = vmemmap_alloc_block(page_size, node);
+ /* altmap lookups only work at section boundaries */
+ altmap = to_vmem_altmap(SECTION_ALIGN_DOWN(start));
+
+ p = __vmemmap_alloc_block_buf(page_size, node, altmap);
if (!p)
return -ENOMEM;
@@ -242,6 +247,8 @@ void __ref vmemmap_free(unsigned long start, unsigned long end)
for (; start < end; start += page_size) {
unsigned long nr_pages, addr;
+ struct vmem_altmap *altmap;
+ struct page *section_base;
struct page *page;
/*
@@ -257,9 +264,13 @@ void __ref vmemmap_free(unsigned long start, unsigned long end)
continue;
page = pfn_to_page(addr >> PAGE_SHIFT);
+ section_base = pfn_to_page(vmemmap_section_start(start));
nr_pages = 1 << page_order;
- if (PageReserved(page)) {
+ altmap = to_vmem_altmap((unsigned long) section_base);
+ if (altmap) {
+ vmem_altmap_free(altmap, nr_pages);
+ } else if (PageReserved(page)) {
/* allocated from bootmem */
if (page_size < PAGE_SIZE) {
/*
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 8e9bef964dbf..8541f18694a4 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -36,6 +36,7 @@
#include <linux/hugetlb.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
+#include <linux/memremap.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
@@ -151,11 +152,20 @@ int arch_remove_memory(u64 start, u64 size)
{
unsigned long start_pfn = start >> PAGE_SHIFT;
unsigned long nr_pages = size >> PAGE_SHIFT;
- struct zone *zone;
+ struct vmem_altmap *altmap;
+ struct page *page;
int ret;
- zone = page_zone(pfn_to_page(start_pfn));
- ret = __remove_pages(zone, start_pfn, nr_pages);
+ /*
+ * If we have an altmap then we need to skip over any reserved PFNs
+ * when querying the zone.
+ */
+ page = pfn_to_page(start_pfn);
+ altmap = to_vmem_altmap((unsigned long) page);
+ if (altmap)
+ page += vmem_altmap_offset(altmap);
+
+ ret = __remove_pages(page_zone(page), start_pfn, nr_pages);
if (ret)
return ret;
--
2.9.4
next prev parent reply other threads:[~2017-06-28 1:32 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-28 1:32 [PATCH v4 1/6] mm, x86: Add ARCH_HAS_ZONE_DEVICE to Kconfig Oliver O'Halloran
2017-06-28 1:32 ` Oliver O'Halloran
2017-06-28 1:32 ` [PATCH v4 2/6] powerpc/vmemmap: Reshuffle vmemmap_free() Oliver O'Halloran
2017-06-28 1:32 ` Oliver O'Halloran [this message]
2017-06-28 1:32 ` [PATCH v4 4/6] powerpc/mm: Add devmap support for ppc64 Oliver O'Halloran
2017-06-28 1:32 ` [PATCH v4 5/6] powerpc/mm: Wire up hpte_removebolted for powernv Oliver O'Halloran
2017-06-28 1:32 ` [PATCH v4 6/6] powerpc/mm: Enable ZONE_DEVICE on powerpc Oliver O'Halloran
2017-06-28 13:08 ` [PATCH v4 1/6] mm, x86: Add ARCH_HAS_ZONE_DEVICE to Kconfig Michael Ellerman
2017-06-28 13:08 ` Michael Ellerman
2017-07-02 11:01 ` [v4,1/6] " Michael Ellerman
2017-07-02 11:01 ` Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170628013236.413-3-oohall@gmail.com \
--to=oohall@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.