From: "Michael S. Tsirkin" <mst@redhat.com>
To: Aleksandr Bezzubikov <zuban32s@gmail.com>
Cc: qemu-devel@nongnu.org, marcel@redhat.com, imammedo@redhat.com,
pbonzini@redhat.com, rth@twiddle.net, ehabkost@redhat.com
Subject: Re: [Qemu-devel] [PATCH RFC 5/6] hw/acpi: extend acpi pci hotplug support for pci express
Date: Fri, 30 Jun 2017 02:30:30 +0300 [thread overview]
Message-ID: <20170630022856-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <1498773362-18675-6-git-send-email-zuban32s@gmail.com>
On Fri, Jun 30, 2017 at 12:56:01AM +0300, Aleksandr Bezzubikov wrote:
> Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
Which means what exactly?
> ---
> hw/i386/acpi-build.c | 47 +++++++++++++++++++++++++++++++----------------
> 1 file changed, 31 insertions(+), 16 deletions(-)
>
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index e434efe..8bbece5 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -254,6 +254,11 @@ static void acpi_get_pci_holes(Range *hole, Range *hole64)
> NULL));
> }
>
> +static void acpi_test_pci_bus(PCIBus *bus, void *opaque)
> +{
> + *(bool *)opaque |= !pci_bus_is_express(bus);
> +}
> +
> #define ACPI_PORT_SMI_CMD 0x00b2 /* TODO: this is APM_CNT_IOPORT */
>
> static void acpi_align_size(GArray *blob, unsigned align)
> @@ -489,7 +494,7 @@ static void *acpi_set_bsel(PCIBus *bus, void *opaque)
> unsigned *bsel_alloc = opaque;
> unsigned *bus_bsel;
>
> - if (qbus_is_hotpluggable(BUS(bus))) {
> + if (qbus_is_hotpluggable(BUS(bus)) && !pci_bus_is_express(bus)) {
> bus_bsel = g_malloc(sizeof *bus_bsel);
>
> *bus_bsel = (*bsel_alloc)++;
> @@ -500,15 +505,12 @@ static void *acpi_set_bsel(PCIBus *bus, void *opaque)
> return bsel_alloc;
> }
>
> -static void acpi_set_pci_info(void)
> +static void acpi_set_pci_info(PCIBus *bus)
> {
> - PCIBus *bus = find_i440fx(); /* TODO: Q35 support */
> unsigned bsel_alloc = ACPI_PCIHP_BSEL_DEFAULT;
>
> - if (bus) {
> - /* Scan all PCI buses. Set property to enable acpi based hotplug. */
> - pci_for_each_bus_depth_first(bus, acpi_set_bsel, NULL, &bsel_alloc);
> - }
> + /* Scan all PCI buses. Set property to enable acpi based hotplug. */
> + pci_for_each_bus_depth_first(bus, acpi_set_bsel, NULL, &bsel_alloc);
> }
>
> static void build_append_pcihp_notify_entry(Aml *method, int slot)
> @@ -570,7 +572,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,
> * In this case they aren't themselves hot-pluggable.
> * Hotplugged bridges *are* hot-pluggable.
> */
> - bridge_in_acpi = pc->is_bridge && pcihp_bridge_en &&
> + bridge_in_acpi = pc->is_bridge && !pc->is_express && pcihp_bridge_en &&
> !DEVICE(pdev)->hotplugged;
>
> hotplug_enabled_dev = bsel && dc->hotpluggable && !bridge_in_acpi;
> @@ -1787,7 +1789,7 @@ static void build_piix4_isa_bridge(Aml *table)
> aml_append(table, scope);
> }
>
> -static void build_piix4_pci_hotplug(Aml *table)
> +static void build_acpi_pci_hotplug(Aml *table)
> {
> Aml *scope;
> Aml *field;
> @@ -1889,6 +1891,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
> uint32_t nr_mem = machine->ram_slots;
> int root_bus_limit = 0xFF;
> PCIBus *root_bus = NULL;
> + bool has_pci_bus = false;
> int i;
>
> dsdt = init_aml_allocator();
> @@ -1910,7 +1913,6 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
> build_piix4_pm(dsdt);
> build_piix4_isa_bridge(dsdt);
> build_isa_devices_aml(dsdt);
> - build_piix4_pci_hotplug(dsdt);
> build_piix4_pci0_int(dsdt);
> } else {
> sb_scope = aml_scope("_SB");
> @@ -1932,6 +1934,11 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
> root_bus = PC_MACHINE(machine)->bus;
> assert(root_bus);
>
> + pci_for_each_bus(root_bus, acpi_test_pci_bus, &has_pci_bus);
> + if (pm->pcihp_bridge_en && has_pci_bus) {
> + build_acpi_pci_hotplug(dsdt);
> + }
> +
> if (pcmc->legacy_cpu_hotplug) {
> build_legacy_cpu_hotplug_aml(dsdt, machine, pm->cpu_hp_io_base);
> } else {
> @@ -1947,7 +1954,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
> {
> aml_append(scope, aml_name_decl("_HID", aml_string("ACPI0006")));
>
> - if (misc->is_piix4) {
> + if (pm->pcihp_bridge_en && has_pci_bus) {
> method = aml_method("_E01", 0, AML_NOTSERIALIZED);
> aml_append(method,
> aml_acquire(aml_name("\\_SB.PCI0.BLCK"), 0xFFFF));
> @@ -2080,7 +2087,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
> crs_range_set_free(&crs_range_set);
>
> /* reserve PCIHP resources */
> - if (pm->pcihp_io_len) {
> + if (pm->pcihp_bridge_en && has_pci_bus && pm->pcihp_io_len) {
> dev = aml_device("PHPR");
> aml_append(dev, aml_name_decl("_HID", aml_string("PNP0A06")));
> aml_append(dev,
> @@ -2212,8 +2219,13 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
> sb_scope = aml_scope("\\_SB");
> {
> Aml *scope = aml_scope("PCI0");
> - /* Scan all PCI buses. Generate tables to support hotplug. */
> - build_append_pci_bus_devices(scope, root_bus, pm->pcihp_bridge_en);
> + bool scope_used = false;
> +
> + if (pm->pcihp_bridge_en && has_pci_bus) {
> + /* Scan all PCI buses. Generate tables to support hotplug. */
> + build_append_pci_bus_devices(scope, root_bus, pm->pcihp_bridge_en);
> + scope_used = true;
> + }
>
> if (misc->tpm_version != TPM_VERSION_UNSPEC) {
> dev = aml_device("ISA.TPM");
> @@ -2230,9 +2242,12 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
> /* aml_append(crs, aml_irq_no_flags(TPM_TIS_IRQ)); */
> aml_append(dev, aml_name_decl("_CRS", crs));
> aml_append(scope, dev);
> + scope_used = true;
> }
>
> - aml_append(sb_scope, scope);
> + if (scope_used) {
> + aml_append(sb_scope, scope);
> + }
> }
> aml_append(dsdt, sb_scope);
>
> @@ -2866,7 +2881,7 @@ void acpi_setup(void)
>
> build_state = g_malloc0(sizeof *build_state);
>
> - acpi_set_pci_info();
> + acpi_set_pci_info(pcms->bus);
>
> acpi_build_tables_init(&tables);
> acpi_build(&tables, MACHINE(pcms));
> --
> 2.7.4
next prev parent reply other threads:[~2017-06-29 23:30 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-29 21:55 [Qemu-devel] [PATCH RFC 0/6] q35: add acpi pci hotplug support Aleksandr Bezzubikov
2017-06-29 21:55 ` [Qemu-devel] [PATCH RFC 1/6] hw/acpi: remove dead acpi code Aleksandr Bezzubikov
2017-06-29 23:27 ` Michael S. Tsirkin
2017-07-03 11:52 ` Igor Mammedov
2017-06-29 21:55 ` [Qemu-devel] [PATCH RFC 2/6] hw/acpi: simplify dsdt building code Aleksandr Bezzubikov
2017-06-29 21:55 ` [Qemu-devel] [PATCH RFC 3/6] hw/acpi: fix pcihp io initialization Aleksandr Bezzubikov
2017-06-29 23:22 ` Michael S. Tsirkin
2017-06-29 21:56 ` [Qemu-devel] [PATCH RFC 4/6] hw/acpi: prepare pci hotplug IO for ich9 Aleksandr Bezzubikov
2017-06-29 23:28 ` Michael S. Tsirkin
2017-06-29 21:56 ` [Qemu-devel] [PATCH RFC 5/6] hw/acpi: extend acpi pci hotplug support for pci express Aleksandr Bezzubikov
2017-06-29 23:30 ` Michael S. Tsirkin [this message]
2017-06-29 21:56 ` [Qemu-devel] [PATCH RFC 6/6] hw/ich9: enable acpi pci hotplug Aleksandr Bezzubikov
2017-06-29 23:31 ` Michael S. Tsirkin
2017-06-29 23:17 ` [Qemu-devel] [PATCH RFC 0/6] q35: add acpi pci hotplug support Michael S. Tsirkin
2017-06-30 7:25 ` Marcel Apfelbaum
2017-06-30 19:19 ` Michael S. Tsirkin
2017-07-03 12:27 ` Igor Mammedov
2017-07-03 13:58 ` Alexander Bezzubikov
2017-07-03 14:41 ` Alexander Bezzubikov
2017-07-03 16:37 ` Michael S. Tsirkin
2017-07-03 16:34 ` Michael S. Tsirkin
2017-07-03 18:26 ` Marcel Apfelbaum
2017-07-03 18:29 ` Michael S. Tsirkin
2017-07-03 22:06 ` Alexander Bezzubikov
2017-07-04 1:00 ` Alexander Bezzubikov
2017-07-04 12:18 ` Marcel Apfelbaum
2017-07-04 13:12 ` Igor Mammedov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170630022856-mutt-send-email-mst@kernel.org \
--to=mst@redhat.com \
--cc=ehabkost@redhat.com \
--cc=imammedo@redhat.com \
--cc=marcel@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=zuban32s@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.