From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.kernel.org ([198.145.29.99]:45166 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751793AbdGAMHA (ORCPT ); Sat, 1 Jul 2017 08:07:00 -0400 Date: Sat, 1 Jul 2017 13:06:56 +0100 From: Jonathan Cameron To: Reno Farnesi Cc: linux-iio@vger.kernel.org Subject: Re: [PATCH] iio: sca3000: Remove trailing whitespace Message-ID: <20170701130656.6e42f672@kernel.org> In-Reply-To: <1498527922.31066.3.camel@gmail.com> References: <1498527922.31066.3.camel@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org On Mon, 26 Jun 2017 21:45:22 -0400 Reno Farnesi wrote: > Removes trailing whitespace to fix checkpatch errors > > Signed-off-by: Reno Farnesi Hi Reno, Your patch doesn't apply as your email client as line wrapped it. Please see the hints in Documentation/process/email-clients.rst Actual change is good though and description is fine - so just the email client bit needs sorting. I've fixed it up and applied the patch to the togreg branch of iio.git which is initially pushed out as testing for the autobuilders to play with it. Thanks, Jonathan > --- > drivers/iio/accel/sca3000.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/iio/accel/sca3000.c b/drivers/iio/accel/sca3000.c > index cb1d83fa19a0..39ab210c44f6 100644 > --- a/drivers/iio/accel/sca3000.c > +++ b/drivers/iio/accel/sca3000.c > @@ -36,7 +36,7 @@ > #define SCA3000_LOCKED BIT(5) > #define SCA3000_EEPROM_CS_ERROR BIT(1) > #define SCA3000_SPI_FRAME_ERROR BIT(0) > - > + > /* All reads done using register decrement so no need to > directly access LSBs */ > #define SCA3000_REG_X_MSB_ADDR 0x05 > #define SCA3000_REG_Y_MSB_ADDR 0x07 > @@ -74,7 +74,7 @@ > #define SCA3000_REG_INT_STATUS_ADDR 0x16 > #define SCA3000_REG_INT_STATUS_THREE_QUARTERS BIT(7) > #define SCA3000_REG_INT_STATUS_HALF BIT(6) > - > + > #define SCA3000_INT_STATUS_FREE_FALL BIT(3) > #define SCA3000_INT_STATUS_Y_TRIGGER BIT(2) > #define SCA3000_INT_STATUS_X_TRIGGER BIT(1) > @@ -124,7 +124,7 @@ > > #define SCA3000_REG_INT_MASK_ADDR 0x21 > #define SCA3000_REG_INT_MASK_PROT_MASK 0x1C > - > + > #define SCA3000_REG_INT_MASK_RING_THREE_QUARTER BIT(7) > #define SCA3000_REG_INT_MASK_RING_HALF BIT(6) >