All of lore.kernel.org
 help / color / mirror / Atom feed
From: Declan Doherty <declan.doherty@intel.com>
To: dev@dpdk.org
Cc: Tomasz Kulasek <tomaszx.kulasek@intel.com>,
	Declan Doherty <declan.doherty@intel.com>
Subject: [PATCH v4 2/2] net/bond: allow slaves to also be bonded devices
Date: Wed,  5 Jul 2017 17:30:23 +0100	[thread overview]
Message-ID: <20170705163023.9595-2-declan.doherty@intel.com> (raw)
In-Reply-To: <20170705163023.9595-1-declan.doherty@intel.com>

From: Tomasz Kulasek <tomaszx.kulasek@intel.com>

This patch removes restrictions in bonded device library which prevent a
bonded device to be added to another bonded device with the limitation
that 802.3ad mode is not supported if one or more slaves is also a
bonded device,

Signed-off-by: Declan Doherty <declan.doherty@intel.com>
---
v4:
 - rebase
 
v3:
 - reworked link management changes and split into separate patch

v2 changes:

 - added dynamic link speed recalculation for a bonding

drivers/net/bonding/rte_eth_bond_api.c     | 28 +++++++++++++++++-----------
 drivers/net/bonding/rte_eth_bond_private.h |  2 +-
 2 files changed, 18 insertions(+), 12 deletions(-)

diff --git a/drivers/net/bonding/rte_eth_bond_api.c b/drivers/net/bonding/rte_eth_bond_api.c
index 82c4499..824ab4f 100644
--- a/drivers/net/bonding/rte_eth_bond_api.c
+++ b/drivers/net/bonding/rte_eth_bond_api.c
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -63,13 +63,18 @@ valid_bonded_port_id(uint8_t port_id)
 }
 
 int
-valid_slave_port_id(uint8_t port_id)
+valid_slave_port_id(uint8_t port_id, uint8_t mode)
 {
 	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -1);
 
 	/* Verify that port_id refers to a non bonded port */
-	if (check_for_bonded_ethdev(&rte_eth_devices[port_id]) == 0)
+	if (check_for_bonded_ethdev(&rte_eth_devices[port_id]) == 0 &&
+			mode == BONDING_MODE_8023AD) {
+		RTE_BOND_LOG(ERR, "Cannot add slave to bonded device in 802.3ad"
+				" mode as slave is also a bonded device, only "
+				"physical devices can be support in this mode.");
 		return -1;
+	}
 
 	return 0;
 }
@@ -235,12 +240,12 @@ __eth_bond_slave_add_lock_free(uint8_t bonded_port_id, uint8_t slave_port_id)
 	struct rte_eth_link link_props;
 	struct rte_eth_dev_info dev_info;
 
-	if (valid_slave_port_id(slave_port_id) != 0)
-		return -1;
-
 	bonded_eth_dev = &rte_eth_devices[bonded_port_id];
 	internals = bonded_eth_dev->data->dev_private;
 
+	if (valid_slave_port_id(slave_port_id, internals->mode) != 0)
+		return -1;
+
 	slave_eth_dev = &rte_eth_devices[slave_port_id];
 	if (slave_eth_dev->data->dev_flags & RTE_ETH_DEV_BONDED_SLAVE) {
 		RTE_BOND_LOG(ERR, "Slave device is already a slave of a bonded device");
@@ -389,12 +394,12 @@ __eth_bond_slave_remove_lock_free(uint8_t bonded_port_id, uint8_t slave_port_id)
 	struct rte_eth_dev *slave_eth_dev;
 	int i, slave_idx;
 
-	if (valid_slave_port_id(slave_port_id) != 0)
-		return -1;
-
 	bonded_eth_dev = &rte_eth_devices[bonded_port_id];
 	internals = bonded_eth_dev->data->dev_private;
 
+	if (valid_slave_port_id(slave_port_id, internals->mode) < 0)
+		return -1;
+
 	/* first remove from active slave list */
 	slave_idx = find_slave_by_id(internals->active_slaves,
 		internals->active_slave_count, slave_port_id);
@@ -509,13 +514,14 @@ rte_eth_bond_primary_set(uint8_t bonded_port_id, uint8_t slave_port_id)
 {
 	struct bond_dev_private *internals;
 
+	internals =  rte_eth_devices[bonded_port_id].data->dev_private;
+
 	if (valid_bonded_port_id(bonded_port_id) != 0)
 		return -1;
 
-	if (valid_slave_port_id(slave_port_id) != 0)
+	if (valid_slave_port_id(slave_port_id, internals->mode) != 0)
 		return -1;
 
-	internals =  rte_eth_devices[bonded_port_id].data->dev_private;
 
 	internals->user_defined_primary_port = 1;
 	internals->primary_port = slave_port_id;
diff --git a/drivers/net/bonding/rte_eth_bond_private.h b/drivers/net/bonding/rte_eth_bond_private.h
index 7295192..8fbf4bf 100644
--- a/drivers/net/bonding/rte_eth_bond_private.h
+++ b/drivers/net/bonding/rte_eth_bond_private.h
@@ -204,7 +204,7 @@ int
 valid_bonded_port_id(uint8_t port_id);
 
 int
-valid_slave_port_id(uint8_t port_id);
+valid_slave_port_id(uint8_t port_id, uint8_t mode);
 
 void
 deactivate_slave(struct rte_eth_dev *eth_dev, uint8_t port_id);
-- 
2.9.4

  reply	other threads:[~2017-07-05 16:33 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-28 19:54 [PATCH] bonding: allow to create master bonding Tomasz Kulasek
2017-06-29 17:30 ` [PATCH v2] " Tomasz Kulasek
2017-07-05 14:58   ` [PATCH v3 1/2] net/bond: fixes for link properties management Declan Doherty
2017-07-05 14:58     ` [PATCH v3 2/2] net/bond: allow slaves to also be bonded devices Declan Doherty
2017-07-05 16:30     ` [PATCH v4 1/2] net/bond: fixes for link properties management Declan Doherty
2017-07-05 16:30       ` Declan Doherty [this message]
2017-07-05 17:09       ` [PATCH v5] " Declan Doherty
2017-07-05 17:24         ` Ferruh Yigit
2017-07-05 18:54         ` [PATCH v6 1/2] " Declan Doherty
2017-07-05 18:54           ` [PATCH v6 2/2] net/bond: allow slaves to also be bonded devices Declan Doherty
2017-07-06  9:33           ` [PATCH v6 1/2] net/bond: fixes for link properties management Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170705163023.9595-2-declan.doherty@intel.com \
    --to=declan.doherty@intel.com \
    --cc=dev@dpdk.org \
    --cc=tomaszx.kulasek@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.