From: Sam Ravnborg <sam@ravnborg.org>
To: barebox@lists.infradead.org
Cc: sam@ravnborg.org
Subject: [RFC PATCH 0/5] at91: move reset vector to board code
Date: Wed, 5 Jul 2017 22:49:35 +0200 [thread overview]
Message-ID: <20170705204935.GA20093@ravnborg.org> (raw)
The following patchset is the start to move the reset vector
for at91 boards from mach-at91 to boards code.
This is similar to what other boards do and is done to prepare
for multi-image support and DT support.
The patchset convert a few boards already and I am aiming to convert
all boards, but wanted feedback on the patch set before starting to do so.
The first patch have minimal impact, but prepares for a
board-by-board conversion.
The patch-set includes the conversion of the boards:
at91sam9261ek
at91sam9263ek
pm9261
at91sam9g10ek
When all boards are converted then there will be no files
named arch/arm/mach-at91/*lowlevel_init.c
And all CONFIG symbols named *_LWL will be no more.
The patchset was successfully booted on a AT91SAM9263EK,
and all defconfigs was built (expect the ones that failed
to build before this patchset was applied).
Note: the patches are from srn@skov.dk - in the next round
I will change this to my home address as this is not work related.
Sam
Sam Ravnborg (5):
at91: refactor lowlevel_init selection
at91: drop unused at91sam9x5_lowlevel_init.c
at91sam9263ek: move reset vector to board code
at91sam9261ek, at91sam9g10ek: move reset vector to board code
pm9261: move reset vector to board code
arch/arm/boards/at91sam9261ek/Makefile | 2 +-
arch/arm/boards/at91sam9261ek/lowlevel_init.c | 41 ++++++++---
arch/arm/boards/at91sam9263ek/Makefile | 2 +-
arch/arm/boards/at91sam9263ek/lowlevel_init.c | 43 +++++++++---
arch/arm/boards/mmccpu/Makefile | 2 +-
arch/arm/boards/pm9261/Makefile | 2 +-
arch/arm/boards/pm9261/lowlevel_init.c | 39 ++++++++---
arch/arm/boards/pm9263/Makefile | 2 +-
arch/arm/boards/tny-a926x/Makefile | 8 +--
arch/arm/boards/usb-a926x/Makefile | 6 +-
arch/arm/mach-at91/Kconfig | 72 +++++++++++++++----
arch/arm/mach-at91/Makefile | 23 +++----
arch/arm/mach-at91/at91sam9x5_lowlevel_init.c | 26 -------
arch/arm/mach-at91/include/mach/at91_lowlevel_init.h | 2 +-
arch/arm/mach-at91/include/mach/at91sam926x_board_init.h | 220 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
15 files changed, 392 insertions(+), 98 deletions(-)
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2017-07-05 20:50 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-05 20:49 Sam Ravnborg [this message]
2017-07-05 20:55 ` [PATCH 1/5] at91: refactor lowlevel_init selection Sam Ravnborg
2017-07-05 20:56 ` [PATCH 2/5] at91: drop unused at91sam9x5_lowlevel_init.c Sam Ravnborg
2017-07-05 20:56 ` [PATCH 3/5] at91sam9263ek: move reset vector to board code Sam Ravnborg
2017-07-05 20:57 ` [PATCH 4/5] at91sam9261ek, at91sam9g10ek: " Sam Ravnborg
2017-07-05 20:57 ` [PATCH 5/5] pm9261: " Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170705204935.GA20093@ravnborg.org \
--to=sam@ravnborg.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.