All of lore.kernel.org
 help / color / mirror / Atom feed
From: Cyril Bur <cyrilbur@gmail.com>
To: linuxppc-dev@lists.ozlabs.org, linux-mtd@lists.infradead.org
Cc: benh@kernel.crashing.org, stewart@linux.vnet.ibm.com,
	dwmw2@infradead.org, rlippert@google.com, alistair@popple.id.au
Subject: [PATCH v2 03/10] mtd: powernv_flash: Don't treat OPAL_SUCCESS as an error
Date: Mon, 10 Jul 2017 11:30:59 +1000	[thread overview]
Message-ID: <20170710013106.27276-4-cyrilbur@gmail.com> (raw)
In-Reply-To: <20170710013106.27276-1-cyrilbur@gmail.com>

While this driver expects to interact asynchronously, OPAL is well
within its rights to return OPAL_SUCCESS to indicate that the operation
completed without the need for a callback. We shouldn't treat
OPAL_SUCCESS as an error rather we should wrap up and return promptly to
the caller.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
---
I'll note here that currently no OPAL exists that will return
OPAL_SUCCESS so there isn't the possibility of a bug today.

 drivers/mtd/devices/powernv_flash.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/devices/powernv_flash.c b/drivers/mtd/devices/powernv_flash.c
index 7b41af06f4fe..d50b5f200f73 100644
--- a/drivers/mtd/devices/powernv_flash.c
+++ b/drivers/mtd/devices/powernv_flash.c
@@ -66,9 +66,8 @@ static int powernv_flash_async_op(struct mtd_info *mtd, enum flash_op op,
 	if (token < 0) {
 		if (token != -ERESTARTSYS)
 			dev_err(dev, "Failed to get an async token\n");
-
-		rc = token;
-		goto out;
+		mutex_unlock(&info->lock);
+		return token;
 	}
 
 	switch (op) {
@@ -87,23 +86,25 @@ static int powernv_flash_async_op(struct mtd_info *mtd, enum flash_op op,
 		goto out;
 	}
 
+	if (rc == OPAL_SUCCESS)
+		goto out_success;
+
 	if (rc != OPAL_ASYNC_COMPLETION) {
 		dev_err(dev, "opal_flash_async_op(op=%d) failed (rc %d)\n",
 				op, rc);
-		opal_async_release_token(token);
 		rc = -EIO;
 		goto out;
 	}
 
 	rc = opal_async_wait_response(token, &msg);
-	opal_async_release_token(token);
-	mutex_unlock(&info->lock);
 	if (rc) {
 		dev_err(dev, "opal async wait failed (rc %d)\n", rc);
-		return -EIO;
+		rc = -EIO;
+		goto out;
 	}
 
 	rc = opal_get_async_rc(msg);
+out_success:
 	if (rc == OPAL_SUCCESS) {
 		rc = 0;
 		if (retlen)
@@ -112,8 +113,8 @@ static int powernv_flash_async_op(struct mtd_info *mtd, enum flash_op op,
 		rc = -EIO;
 	}
 
-	return rc;
 out:
+	opal_async_release_token(token);
 	mutex_unlock(&info->lock);
 	return rc;
 }
-- 
2.13.2

  parent reply	other threads:[~2017-07-10  1:31 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-10  1:30 [PATCH v2 00/10] Allow opal-async waiters to get interrupted Cyril Bur
2017-07-10  1:30 ` [PATCH v2 01/10] mtd: powernv_flash: Use WARN_ON_ONCE() rather than BUG_ON() Cyril Bur
2017-07-10  1:30 ` [PATCH v2 02/10] mtd: powernv_flash: Lock around concurrent access to OPAL Cyril Bur
2017-07-10  1:30 ` Cyril Bur [this message]
2017-07-10  1:31 ` [PATCH v2 04/10] mtd: powernv_flash: Remove pointless goto in driver init Cyril Bur
2017-07-10  1:31 ` [PATCH v2 05/10] powerpc/opal: Make __opal_async_{get, release}_token() static Cyril Bur
2017-07-10  1:31 ` [PATCH v2 06/10] powerpc/opal: Rework the opal-async interface Cyril Bur
2017-07-10  1:31 ` [PATCH v2 07/10] powernv/opal-sensor: remove not needed lock Cyril Bur
2017-07-10  1:31 ` [PATCH v2 08/10] powerpc/opal: Add opal_async_wait_response_interruptible() to opal-async Cyril Bur
2017-07-10 14:05   ` David Laight
2017-07-10 14:05     ` David Laight
2017-07-11  0:48     ` Cyril Bur
2017-07-10  1:31 ` [PATCH v2 09/10] powerpc/powernv: Add OPAL_BUSY to opal_error_code() Cyril Bur
2017-07-10  1:31 ` [PATCH v2 10/10] mtd: powernv_flash: Use opal_async_wait_response_interruptible() Cyril Bur
2017-07-11  4:19   ` kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170710013106.27276-4-cyrilbur@gmail.com \
    --to=cyrilbur@gmail.com \
    --cc=alistair@popple.id.au \
    --cc=benh@kernel.crashing.org \
    --cc=dwmw2@infradead.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=rlippert@google.com \
    --cc=stewart@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.