From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux-kernel-dev@beckhoff.com (linux-kernel-dev at beckhoff.com) Date: Thu, 13 Jul 2017 13:04:11 +0200 Subject: [PATCH v2 0/2] Add CX9020 device tree In-Reply-To: <20170712090408.12212-1-linux-kernel-dev@beckhoff.com> References: <20170712090408.12212-1-linux-kernel-dev@beckhoff.com> Message-ID: <20170713110413.12721-1-linux-kernel-dev@beckhoff.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Patrick Bruenn Add device tree for Beckhoff CX9020 Embedded PC. The CX9020 differs from i.MX53 Quick Start Board by: - use uart2 instead of uart1 - DVI-D connector instead of VGA - no audio - CCAT FPGA connected to emi - enable rtc Patrick Bruenn (2): ARM: dts: imx: add CX9020 Embedded PC device tree drm/panel: simple: Add support for ddc-only panel arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx53-cx9020.dts | 370 +++++++++++++++++++++++++++++++++++ drivers/gpu/drm/panel/panel-simple.c | 6 + 3 files changed, 377 insertions(+) create mode 100644 arch/arm/boot/dts/imx53-cx9020.dts -- 2.11.0 From mboxrd@z Thu Jan 1 00:00:00 1970 From: Subject: [PATCH v2 0/2] Add CX9020 device tree Date: Thu, 13 Jul 2017 13:04:11 +0200 Message-ID: <20170713110413.12721-1-linux-kernel-dev@beckhoff.com> References: <20170712090408.12212-1-linux-kernel-dev@beckhoff.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20170712090408.12212-1-linux-kernel-dev@beckhoff.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , "open list:DRM PANEL DRIVERS" Cc: Mark Rutland , Patrick Bruenn , David Airlie , Russell King , open list , Rob Herring , Thierry Reding , Sascha Hauer , Fabio Estevam , Shawn Guo , "moderated list:ARM PORT" List-Id: devicetree@vger.kernel.org From: Patrick Bruenn Add device tree for Beckhoff CX9020 Embedded PC. The CX9020 differs from i.MX53 Quick Start Board by: - use uart2 instead of uart1 - DVI-D connector instead of VGA - no audio - CCAT FPGA connected to emi - enable rtc Patrick Bruenn (2): ARM: dts: imx: add CX9020 Embedded PC device tree drm/panel: simple: Add support for ddc-only panel arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx53-cx9020.dts | 370 +++++++++++++++++++++++++++++++++++ drivers/gpu/drm/panel/panel-simple.c | 6 + 3 files changed, 377 insertions(+) create mode 100644 arch/arm/boot/dts/imx53-cx9020.dts -- 2.11.0 From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751355AbdGMLJq (ORCPT ); Thu, 13 Jul 2017 07:09:46 -0400 Received: from internet2.beckhoff.com ([194.25.186.210]:63040 "EHLO Internet2.beckhoff.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751106AbdGMLJp (ORCPT ); Thu, 13 Jul 2017 07:09:45 -0400 X-Greylist: delayed 300 seconds by postgrey-1.27 at vger.kernel.org; Thu, 13 Jul 2017 07:09:44 EDT From: To: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , "open list:DRM PANEL DRIVERS" CC: Patrick Bruenn , Rob Herring , Mark Rutland , Russell King , Shawn Guo , Sascha Hauer , Thierry Reding , David Airlie , Fabio Estevam , "moderated list:ARM PORT" , open list Subject: [PATCH v2 0/2] Add CX9020 device tree Date: Thu, 13 Jul 2017 13:04:11 +0200 Message-ID: <20170713110413.12721-1-linux-kernel-dev@beckhoff.com> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170712090408.12212-1-linux-kernel-dev@beckhoff.com> References: <20170712090408.12212-1-linux-kernel-dev@beckhoff.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [172.17.66.104] X-OLX-Disclaimer: Done Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Patrick Bruenn Add device tree for Beckhoff CX9020 Embedded PC. The CX9020 differs from i.MX53 Quick Start Board by: - use uart2 instead of uart1 - DVI-D connector instead of VGA - no audio - CCAT FPGA connected to emi - enable rtc Patrick Bruenn (2): ARM: dts: imx: add CX9020 Embedded PC device tree drm/panel: simple: Add support for ddc-only panel arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx53-cx9020.dts | 370 +++++++++++++++++++++++++++++++++++ drivers/gpu/drm/panel/panel-simple.c | 6 + 3 files changed, 377 insertions(+) create mode 100644 arch/arm/boot/dts/imx53-cx9020.dts -- 2.11.0