All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sam Ravnborg <sam@ravnborg.org>
To: Barebox List <barebox@lists.infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH 3/6] atmel_lcdfb: move lcd_wiring_mode, have_intensity_bit to local data
Date: Thu, 20 Jul 2017 22:05:23 +0200	[thread overview]
Message-ID: <20170720200526.19523-3-sam@ravnborg.org> (raw)
In-Reply-To: <20170720200103.GA16205@ravnborg.org>

Copy lcd_wiring_mode and have_intensity_bit to
atmel_lcdfb_info to minimize dependency on the
atmel_lcdfb_platform_data.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 drivers/video/atmel_lcdfb.h      | 2 ++
 drivers/video/atmel_lcdfb_core.c | 9 +++++----
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/video/atmel_lcdfb.h b/drivers/video/atmel_lcdfb.h
index 1be9cccd9..90992df02 100644
--- a/drivers/video/atmel_lcdfb.h
+++ b/drivers/video/atmel_lcdfb.h
@@ -23,6 +23,8 @@ struct atmel_lcdfb_info {
 	unsigned int		smem_len;
 	unsigned int		lcdcon2;
 	unsigned int		dmacon;
+	unsigned int		lcd_wiring_mode;
+	bool			have_intensity_bit;
 	struct clk		*bus_clk;
 	struct clk		*lcdc_clk;
 
diff --git a/drivers/video/atmel_lcdfb_core.c b/drivers/video/atmel_lcdfb_core.c
index a79c31ae4..cdeb927ad 100644
--- a/drivers/video/atmel_lcdfb_core.c
+++ b/drivers/video/atmel_lcdfb_core.c
@@ -69,7 +69,6 @@ static int atmel_lcdfb_check_var(struct fb_info *info)
 {
 	struct device_d *dev = &info->dev;
 	struct atmel_lcdfb_info *sinfo = info->priv;
-	struct atmel_lcdfb_platform_data *pdata = sinfo->pdata;
 	struct fb_videomode *mode = info->mode;
 	unsigned long clk_value_khz;
 
@@ -126,11 +125,11 @@ static int atmel_lcdfb_check_var(struct fb_info *info)
 		break;
 	case 16:
 		/* Older SOCs use IBGR:555 rather than BGR:565. */
-		if (pdata->have_intensity_bit)
+		if (sinfo->have_intensity_bit)
 			info->green.length = 5;
 		else
 			info->green.length = 6;
-		if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
+		if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
 			/* RGB:5X5 mode */
 			info->red.offset = info->green.length + 5;
 			info->blue.offset = 0;
@@ -147,7 +146,7 @@ static int atmel_lcdfb_check_var(struct fb_info *info)
 		info->transp.length = 8;
 		/* fall through */
 	case 24:
-		if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
+		if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
 			/* RGB:888 mode */
 			info->red.offset = 16;
 			info->blue.offset = 0;
@@ -261,6 +260,8 @@ int atmel_lcdc_register(struct device_d *dev, struct atmel_lcdfb_devdata *data)
 	sinfo->guard_time = pdata->guard_time;
 	sinfo->lcdcon2 = pdata->default_lcdcon2;
 	sinfo->dmacon = pdata->default_dmacon;
+	sinfo->lcd_wiring_mode = pdata->lcd_wiring_mode;
+	sinfo->have_intensity_bit = pdata->have_intensity_bit;
 	iores = dev_request_mem_resource(dev, 0);
 	if (IS_ERR(iores))
 		return PTR_ERR(iores);
-- 
2.12.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2017-07-20 20:05 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-20 20:01 [PATCH 0/6] Add DT support for at91_udc and atmel_lcdfb Sam Ravnborg
2017-07-20 20:05 ` [PATCH 1/6] at91_udc: add DT support Sam Ravnborg
2017-07-20 20:05 ` [PATCH 2/6] atmel_lcdfb: move dmacon, lcdcon2 to local data Sam Ravnborg
2017-07-20 20:05 ` Sam Ravnborg [this message]
2017-07-20 20:05 ` [PATCH 4/6] atmel_lcdfb: define power_control gpio in platform_data Sam Ravnborg
2017-07-20 20:05 ` [PATCH 5/6] atmel_lcdfb: move pdata init to a separate function Sam Ravnborg
2017-07-20 20:05 ` [PATCH 6/6] atmel_lcdfb: add DT support Sam Ravnborg
2017-09-06 12:29 ` [PATCH 0/6] Add DT support for at91_udc and atmel_lcdfb Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170720200526.19523-3-sam@ravnborg.org \
    --to=sam@ravnborg.org \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.