[Qemu-devel] [PATCH 1/3] scripts: introduce buildconf.py

[Cleber Rosa <crosa@redhat.com>]

scripts/buildconf.py is a command line utility (but also can be used
as a Python module) that introspects the build configuration.

It uses the generated host level config-host.mak to obtain the general
build configuration, and optionally, also target specific
config-target.mak and config-devices.mak.  It does not attempt to
implement a Makefile parser, but instead relies on "make" itself to
parse those files and output the queried variable.

It requires a build tree that has been both configured and built.  By
default, for convenience, it will selected a default target, which can
be displayed and overriden.  A few examples follow.

To get the TLS priority (a host level configuration), one would run:

 $ ./scripts/buildconf.py CONFIG_TLS_PRIORITY
 NORMAL

To get a configuration from the default target devices:

 $ ./scripts/buildconf.py CONFIG_PARALLEL
 y

If one is not interested in the actual value, but whether a given
feature is enabled, the '-c|--check' option can be used:

 $ ./scripts/buildconf.py -c CONFIG_PARALLEL; echo $?
 0

And for checking a target different than the default one:

 $ ./scripts/buildconf.py -c CONFIG_PARALLEL arm-softmmu; echo $?
 255

Signed-off-by: Cleber Rosa <crosa@redhat.com>
---
 scripts/buildconf.py | 278 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 278 insertions(+)
 create mode 100755 scripts/buildconf.py

diff --git a/scripts/buildconf.py b/scripts/buildconf.py
new file mode 100755
index 0000000..0eee6d7
--- /dev/null
+++ b/scripts/buildconf.py
@@ -0,0 +1,278 @@
+#!/usr/bin/env python
+#
+# QEMU build configuration introspection utilty
+#
+# Copyright (C) 2017 Red Hat Inc.
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, see <http://www.gnu.org/licenses/>.
+#
+# Authors:
+#  Cleber Rosa <crosa@redhat.com>
+
+"""
+QEMU's build configuration is recorded in both config-host.mak and
+config-host.h, as is specific target configuration expressed in
+<target>/config-{target,devices}.{mak,h}.
+
+This module relies on the .mak files, as they contain a bit more
+information than the .h files.
+
+While it would be possible to write a simple Makefile parser capable to
+handle the variable assignments, this would impose limitations on this
+script and introduce breakages if the build scripts start using
+functionality not expected here.
+
+The approach chosen was one that is definitely slower at runtime but
+is more reliable.  Temporary Makefiles that include config-host.mak,
+and optionally the target specific config-target.mak and
+config-devices.mak files, and print the desired configuration to
+stdout.  As long as the basic premises of a global config-host.mak,
+and target specific config-target.mak and config-devices.mak is kept,
+this tool should be able to keep up with any style or feature chances.
+"""
+
+from __future__ import print_function
+
+import optparse
+import os
+import subprocess
+import sys
+import tempfile
+
+
+TEMPLATE = """
+include {build_prefix}/config-host.mak
+{target_specific}
+
+all:
+	@echo $({conf})
+"""
+
+TARGET_TEMPLATE = """
+include {build_prefix}/{target}/config-target.mak
+include {build_prefix}/{target}/config-devices.mak
+"""
+
+
+class InvalidTarget(Exception):
+    """
+    Target chosen is not present in the current build tree configuration
+    """
+
+
+def get_build_root():
+    """
+    Returns the absolute location of the root of the build tree
+
+    This has been tested from build(only) trees, and works fine when
+    it's executed as a command line tool.
+
+    If this is used as a Python module, it will really depend on how
+    the module is imported.  If the build tree "scripts" directory is
+    added to the import path, this will work properly.  If the current
+    working directory is the "scripts" directory itself, and no
+    explicit import path is added, it will only work when building
+    from the source tree, and will *not* work when the build tree is
+    different from the source tree.
+
+    A longer explanation on this caveat: the Python import
+    implementation will look for a matching module in the current
+    working directory.  Python's current working directory,
+    os.getcwd(), is really like getcwd(3), and not like
+    os.getenv("PWD").  Because the scripts directory is linked to the
+    source tree, os.getcwd() returns the source tree location instead.
+    """
+    return os.path.dirname(os.path.dirname(os.path.abspath(__file__)))
+
+
+def is_build_root_configured():
+    """
+    Checks if the build root has been configured
+
+    In theory, this only makes sense for in-tree builds, because the
+    out-of-tree build directory, including the link to the scripts
+    directory containing this script, will only exist after a
+    successful "./configure" execution.
+
+    Either way, the check is still valid for the main source of
+    build configuration, that is, the existence of 'config-host.mak'
+    """
+    return os.path.isfile(os.path.join(get_build_root(), 'config-host.mak'))
+
+
+def get_default_target():
+    """
+    Returns the default target on the current build tree
+
+    The approach used here is to look for a "-softmmu" target that
+    matches "ARCH".  If found, that is the best choice for a default
+    target.
+
+    If not found, the first "-softmmu" target found is considered the
+    next best choice for a default target.
+
+    As a fallback if no "-softmmu" target exists, the first entry on
+    the target list is returned.
+
+    :returns: a target name or None if no target is configured
+    """
+    targets = get_targets()
+    if not targets:
+        return None
+    arch = get_build_conf("ARCH", None)
+    first_choice = "%s-softmmu" % arch
+    if first_choice in targets:
+        return first_choice
+    else:
+        softmmu_targets = [t for t in targets if t.endswith("-softmmu")]
+        if softmmu_targets:
+            return softmmu_targets[0]
+        else:
+            return targets[0]
+
+
+def get_build_conf(conf, target=None):
+    """
+    Returns the value of a given Makefile variable
+
+    :param conf: the configuration name, which really must be a
+                 Makefile variable in either the host or target .mak
+                 files
+    :param target: the name of a valid target in the current build tree.
+                   it must match the name of a target dir, such as
+                   'x86_64-softmmu' or 'i386-linux-user'.
+    :returns: the raw output or None
+    :rtype: str or None
+    """
+    build_prefix = get_build_root()
+
+    if target is None:
+        target_specific = ''
+    else:
+        if target not in get_targets():
+            raise InvalidTarget
+        target_specific = TARGET_TEMPLATE.format(build_prefix=build_prefix,
+                                                 target=target)
+
+    mak_fd, mak_path = tempfile.mkstemp()
+    os.write(mak_fd, TEMPLATE.format(build_prefix=build_prefix,
+                                     target_specific=target_specific,
+                                     conf=conf))
+    proc = subprocess.Popen(['make', '-f', mak_path],
+                            stdout=subprocess.PIPE,
+                            stderr=subprocess.PIPE)
+    ret = proc.wait()
+    os.unlink(mak_path)
+    if (ret == 0):
+        return proc.stdout.read().strip()
+
+
+def is_enabled(conf, target=None):
+    """
+    Checks wether a given feature is enabled in the build configuration
+
+    The Makefile variables default to using 'y' when they are enabled,
+    and are just missing (instead of set no 'n') when they're not enabled.
+    Even if a given variable is set, for instance in the case of TARGET_DIRS,
+    it will not be considered enabled by this function unless its content is
+    'y'.  For variables that are known to not contain 'y', please resort to
+    using get_build_conf() and parsing its output for meaningful value.
+
+    :param conf: the configuration name, which really must be a
+                 Makefile variable in either the host or target .mak
+                 files
+    :param target: the name of a valid target in the current build tree.
+                   it must match the name of a target dir, such as
+                   'x86_64-softmmu' or 'i386-linux-user'.
+    :returns: the raw output or None
+    :rtype: str or None
+    """
+    build_conf = get_build_conf(conf, target=target)
+    if build_conf == 'y':
+        return True
+    return False
+
+
+def get_targets():
+    """
+    Returns the list of targets currently configured
+
+    :rtype: list
+    """
+    targets = get_build_conf('TARGET_DIRS', None)
+    if targets is not None:
+        return targets.split()
+
+
+if __name__ == '__main__':
+    class Parser(optparse.OptionParser):
+
+        def __init__(self):
+            optparse.OptionParser.__init__(
+                self,
+                usage=('%prog [options] CONFIG [TARGET]\n\n'
+                       'CONFIG is the build configuration variable name\n'
+                       'TARGET is auto selected if not explicitly set'))
+            self.add_option('-c', '--check', action='store_true',
+                            help=('Checks if the build configuration option is '
+                                  'set to "y".  This causes this tool to be silent '
+                                  'and return only a status code of either 0 (if '
+                                  'configuration is set) or non-zero otherwise.'))
+            self.add_option('-n', '--no-default-target', action='store_true',
+                            help=('Do not attempt to use a default target if one '
+                                  'was not explicitly given in the command line'))
+            self.add_option('--print-target', action='store_true',
+                            help=('Also prints the selected target'))
+
+
+    class App(object):
+
+        def __init__(self):
+            self.target = None
+            self.parser = Parser()
+            self._parse()
+
+        def _parse(self):
+            self.opts, self.args = self.parser.parse_args()
+            args_len = len(self.args)
+            if (args_len < 1 or args_len > 2):
+                self.parser.print_help()
+                sys.exit(0)
+            elif args_len == 2:
+                self.target = self.args[1]
+            else:
+                if not self.opts.no_default_target:
+                    self.target = get_default_target()
+
+        def run(self):
+            if self.opts.print_target:
+                print("TARGET:", self.target)
+            config = self.args[0]
+            if self.opts.check:
+                result = is_enabled(config, self.target)
+                if result:
+                    sys.exit(0)
+                else:
+                    sys.exit(-1)
+            else:
+                conf = get_build_conf(config, self.target)
+                if conf:
+                    print(conf)
+                    sys.exit(0)
+                else:
+                    sys.exit(-1)
+
+
+    app = App()
+    app.run()
-- 
2.9.4