From: Matt Brown <matthew.brown.dev@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v2 2/5] powerpc/lib/sstep: Add popcnt instruction emulation
Date: Mon, 24 Jul 2017 11:01:06 +1000 [thread overview]
Message-ID: <20170724010109.21263-2-matthew.brown.dev@gmail.com> (raw)
In-Reply-To: <20170724010109.21263-1-matthew.brown.dev@gmail.com>
This adds emulations for the popcntb, popcntw, and popcntd instructions.
Tested for correctness against the popcnt{b,w,d} instructions on ppc64le.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
---
v2:
- fixed opcodes
- fixed typecasting
- fixed bitshifting error for both 32 and 64bit arch
---
arch/powerpc/lib/sstep.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 42 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index 87d277f..e6a16a3 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -612,6 +612,35 @@ static nokprobe_inline void do_cmpb(struct pt_regs *regs, unsigned long v1,
regs->gpr[rd] = out_val;
}
+/*
+ * The size parameter is used to adjust the equivalent popcnt instruction.
+ * popcntb = 8, popcntw = 32, popcntd = 64
+ */
+static nokprobe_inline void do_popcnt(struct pt_regs *regs, unsigned long v1,
+ int size, int ra)
+{
+ unsigned long long high, low, mask;
+ unsigned int n;
+ int i, j;
+
+ high = 0;
+ low = 0;
+
+ for (i = 0; i < (64 / size); i++) {
+ n = 0;
+ for (j = 0; j < size; j++) {
+ mask = 1UL << (j + (i * size));
+ if (v1 & mask)
+ n++;
+ }
+ if ((i * size) < 32)
+ low |= n << (i * size);
+ else
+ high |= n << ((i * size) - 32);
+ }
+ regs->gpr[ra] = (high << 32) | low;
+}
+
static nokprobe_inline int trap_compare(long v1, long v2)
{
int ret = 0;
@@ -1194,6 +1223,10 @@ int analyse_instr(struct instruction_op *op, struct pt_regs *regs,
regs->gpr[ra] = regs->gpr[rd] & ~regs->gpr[rb];
goto logical_done;
+ case 122: /* popcntb */
+ do_popcnt(regs, regs->gpr[rd], 8, ra);
+ goto logical_done;
+
case 124: /* nor */
regs->gpr[ra] = ~(regs->gpr[rd] | regs->gpr[rb]);
goto logical_done;
@@ -1206,6 +1239,10 @@ int analyse_instr(struct instruction_op *op, struct pt_regs *regs,
regs->gpr[ra] = regs->gpr[rd] ^ regs->gpr[rb];
goto logical_done;
+ case 378: /* popcntw */
+ do_popcnt(regs, regs->gpr[rd], 32, ra);
+ goto logical_done;
+
case 412: /* orc */
regs->gpr[ra] = regs->gpr[rd] | ~regs->gpr[rb];
goto logical_done;
@@ -1217,7 +1254,11 @@ int analyse_instr(struct instruction_op *op, struct pt_regs *regs,
case 476: /* nand */
regs->gpr[ra] = ~(regs->gpr[rd] & regs->gpr[rb]);
goto logical_done;
-
+#ifdef __powerpc64__
+ case 506: /* popcntd */
+ do_popcnt(regs, regs->gpr[rd], 64, ra);
+ goto logical_done;
+#endif
case 922: /* extsh */
regs->gpr[ra] = (signed short) regs->gpr[rd];
goto logical_done;
--
2.9.3
next prev parent reply other threads:[~2017-07-24 1:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-24 1:01 [PATCH v2 1/5] powerpc/lib/sstep: Add cmpb instruction emulation Matt Brown
2017-07-24 1:01 ` Matt Brown [this message]
2017-07-24 7:36 ` [PATCH v2 2/5] powerpc/lib/sstep: Add popcnt " Segher Boessenkool
2017-07-24 10:28 ` Balbir Singh
2017-07-25 0:53 ` Matt Brown
2017-07-24 1:01 ` [PATCH v2 3/5] powerpc/lib/sstep: Add bpermd " Matt Brown
2017-07-24 1:01 ` [PATCH 4/5] powerpc/lib/sstep: Add prty " Matt Brown
2017-07-24 1:01 ` [PATCH v2 5/5] powerpc/lib/sstep: Add isel " Matt Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170724010109.21263-2-matthew.brown.dev@gmail.com \
--to=matthew.brown.dev@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.