Re: [Qemu-devel] [PATCH] migration: optimize the downtime

["Dr. David Alan Gilbert" <dgilbert@redhat.com>]

* Jay Zhou (jianjay.zhou@huawei.com) wrote:
> Hi Dave,
> 
> On 2017/7/21 17:49, Dr. David Alan Gilbert wrote:
> > * Jay Zhou (jianjay.zhou@huawei.com) wrote:
> > > Qemu_savevm_state_cleanup() takes about 300ms in my ram migration tests
> > > with a 8U24G vm(20G is really occupied), the main cost comes from
> > > KVM_SET_USER_MEMORY_REGION ioctl when mem.memory_size = 0 in
> > > kvm_set_user_memory_region(). In kmod, the main cost is
> > > kvm_zap_obsolete_pages(), which traverses the active_mmu_pages list to
> > > zap the unsync sptes.
> > 
> > Hi Jay,
> >    Is this actually increasing the real downtime when the guest isn't
> > running, or is it just the reported time? I see that the s->downtime
> > value is calculated right after where we currently call
> > qemu_savevm_state_cleanup.
> 
> It actually increased the real downtime, I used the "ping" command to
> test. Reason is that the source side libvirt sends qmp to qemu to query
> the status of migration, which needs the BQL. qemu_savevm_state_cleanup
> is done with BQL, qemu can not handle the qmp if qemu_savevm_state_cleanup
> has not finished. And the source side libvirt delays about 300ms to notify
> the destination side libvirt to send the "cont" command to start the vm.
> 
> I think the value of s->downtime is not accurate enough, maybe we could
> move the calculation of end_time after qemu_savevm_state_cleanup has done.

I'm copying in Paolo, Radim and Andrea- is there anyway we can make the
teardown of KVMs dirty tracking not take so long? 300ms is a silly long time
on only a small VM.

> >    I guess the biggest problem is that 300ms happens before we restart
> > the guest on the source if a migration fails.
> 
> 300ms happens even if a migration succeeds.

Hmm, OK, this needs fixing then - it does explain a result I saw a while
ago where the downtime was much bigger with libvirt than it was with
qemu on it's own.

> > > I think it can be optimized:
> > > (1) source vm will be destroyed if the migration is successfully done,
> > >      so the resources will be cleanuped automatically by the system
> > > (2) delay the cleanup if the migration failed
> > 
> > I don't like putting it in qmp_cont; that shouldn't have migration magic
> > in it.
> 
> Yes, it is not a ideal place. :(
> 
> > I guess we could put it in migrate_fd_cleanup perhaps? It gets called on
> > a bh near the end -  or could we just move it closer to the end of
> > migration_thread?
> 
> I have tested putting it in migrate_fd_cleanup, but the downtime is not
> optimized. So I think it is the same to move it closer to the end of
> migration_thread if it holds the BQL.
> Could we put it in migrate_init?

Your explanation above hints as to why migrate_fd_cleanup doesn't help;
it's because we're still going to be doing it with the BQL taken.

Can you tell me which version of libvirt you're using?
I thought the newer ones were supposed to use events so they did't
have to poll qemu.

 If we move qemu_savevm_state_cleanup is it still safe? Are there
some things we're supposed to do at that point which are wrong if
we don't.

I wonder about something like;  take a mutex in
memory_global_dirty_log_start, release it in
memory_global_dirty_log_stop.  Then make ram_save_cleanup start
a new thread that does the call to memory_global_dirty_log_stop.

Dave

> Thanks,
> Jay
> 
> > However, we would need to be a bit careful of anything that needs
> > cleaning up before the source restarts on failure; I'm not sure of
> > the semantics of all the current things wired into save_cleanup.
> > 
> > Dave
> > 
> > 
> > > Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
> > > ---
> > >   migration/migration.c | 16 +++++++++-------
> > >   qmp.c                 | 10 ++++++++++
> > >   2 files changed, 19 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/migration/migration.c b/migration/migration.c
> > > index a0db40d..72832be 100644
> > > --- a/migration/migration.c
> > > +++ b/migration/migration.c
> > > @@ -1877,6 +1877,15 @@ static void *migration_thread(void *opaque)
> > >           if (qemu_file_get_error(s->to_dst_file)) {
> > >               migrate_set_state(&s->state, current_active_state,
> > >                                 MIGRATION_STATUS_FAILED);
> > > +            /*
> > > +             * The resource has been allocated by migration will be reused in
> > > +             * COLO process, so don't release them.
> > > +             */
> > > +            if (!enable_colo) {
> > > +                qemu_mutex_lock_iothread();
> > > +                qemu_savevm_state_cleanup();
> > > +                qemu_mutex_unlock_iothread();
> > > +            }
> > >               trace_migration_thread_file_err();
> > >               break;
> > >           }
> > > @@ -1916,13 +1925,6 @@ static void *migration_thread(void *opaque)
> > >       end_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
> > > 
> > >       qemu_mutex_lock_iothread();
> > > -    /*
> > > -     * The resource has been allocated by migration will be reused in COLO
> > > -     * process, so don't release them.
> > > -     */
> > > -    if (!enable_colo) {
> > > -        qemu_savevm_state_cleanup();
> > > -    }
> > >       if (s->state == MIGRATION_STATUS_COMPLETED) {
> > >           uint64_t transferred_bytes = qemu_ftell(s->to_dst_file);
> > >           s->total_time = end_time - s->total_time;
> > > diff --git a/qmp.c b/qmp.c
> > > index b86201e..0e68eaa 100644
> > > --- a/qmp.c
> > > +++ b/qmp.c
> > > @@ -37,6 +37,8 @@
> > >   #include "qom/object_interfaces.h"
> > >   #include "hw/mem/pc-dimm.h"
> > >   #include "hw/acpi/acpi_dev_interface.h"
> > > +#include "migration/migration.h"
> > > +#include "migration/savevm.h"
> > > 
> > >   NameInfo *qmp_query_name(Error **errp)
> > >   {
> > > @@ -200,6 +202,14 @@ void qmp_cont(Error **errp)
> > >       if (runstate_check(RUN_STATE_INMIGRATE)) {
> > >           autostart = 1;
> > >       } else {
> > > +        /*
> > > +         * Delay the cleanup to reduce the downtime of migration.
> > > +         * The resource has been allocated by migration will be reused
> > > +         * in COLO process, so don't release them.
> > > +         */
> > > +        if (runstate_check(RUN_STATE_POSTMIGRATE) && !migrate_colo_enabled()) {
> > > +            qemu_savevm_state_cleanup();
> > > +        }
> > >           vm_start();
> > >       }
> > >   }
> > > --
> > > 1.8.3.1
> > > 
> > > 
> > --
> > Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
> > 
> > .
> > 
> 
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK