From: Richard Henderson <rth@twiddle.net>
To: qemu-devel@nongnu.org
Cc: agraf@suse.de, cohuck@redhat.com, borntraeger@de.ibm.com
Subject: [Qemu-devel] [PATCH 5/8] tcg/s390: Merge ori+xori facilities check to tcg_target_op_def
Date: Thu, 3 Aug 2017 22:28:30 -0700 [thread overview]
Message-ID: <20170804052833.10187-9-rth@twiddle.net> (raw)
In-Reply-To: <20170804052833.10187-1-rth@twiddle.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
---
tcg/s390/tcg-target.inc.c | 101 +++++++++++++++-------------------------------
1 file changed, 33 insertions(+), 68 deletions(-)
diff --git a/tcg/s390/tcg-target.inc.c b/tcg/s390/tcg-target.inc.c
index 6b08ccea6d..5414c9d879 100644
--- a/tcg/s390/tcg-target.inc.c
+++ b/tcg/s390/tcg-target.inc.c
@@ -40,8 +40,8 @@
#define TCG_CT_CONST_S16 0x100
#define TCG_CT_CONST_S32 0x200
-#define TCG_CT_CONST_ORI 0x400
-#define TCG_CT_CONST_XORI 0x800
+#define TCG_CT_CONST_NN16 0x400
+#define TCG_CT_CONST_NN32 0x800
#define TCG_CT_CONST_U31 0x1000
#define TCG_CT_CONST_S33 0x2000
#define TCG_CT_CONST_ZERO 0x4000
@@ -395,11 +395,11 @@ static const char *target_parse_constraint(TCGArgConstraint *ct,
case 'J':
ct->ct |= TCG_CT_CONST_S32;
break;
- case 'O':
- ct->ct |= TCG_CT_CONST_ORI;
+ case 'N':
+ ct->ct |= TCG_CT_CONST_NN16;
break;
- case 'X':
- ct->ct |= TCG_CT_CONST_XORI;
+ case 'M':
+ ct->ct |= TCG_CT_CONST_NN32;
break;
case 'C':
/* ??? We have no insight here into whether the comparison is
@@ -424,60 +424,6 @@ static const char *target_parse_constraint(TCGArgConstraint *ct,
return ct_str;
}
-/* Immediates to be used with logical OR. This is an optimization only,
- since a full 64-bit immediate OR can always be performed with 4 sequential
- OI[LH][LH] instructions. What we're looking for is immediates that we
- can load efficiently, and the immediate load plus the reg-reg OR is
- smaller than the sequential OI's. */
-
-static int tcg_match_ori(TCGType type, tcg_target_long val)
-{
- if (s390_facilities & FACILITY_EXT_IMM) {
- if (type == TCG_TYPE_I32) {
- /* All 32-bit ORs can be performed with 1 48-bit insn. */
- return 1;
- }
- }
-
- /* Look for negative values. These are best to load with LGHI. */
- if (val < 0) {
- if (val == (int16_t)val) {
- return 0;
- }
- if (s390_facilities & FACILITY_EXT_IMM) {
- if (val == (int32_t)val) {
- return 0;
- }
- }
- }
-
- return 1;
-}
-
-/* Immediates to be used with logical XOR. This is almost, but not quite,
- only an optimization. XOR with immediate is only supported with the
- extended-immediate facility. That said, there are a few patterns for
- which it is better to load the value into a register first. */
-
-static int tcg_match_xori(TCGType type, tcg_target_long val)
-{
- if ((s390_facilities & FACILITY_EXT_IMM) == 0) {
- return 0;
- }
-
- if (type == TCG_TYPE_I32) {
- /* All 32-bit XORs can be performed with 1 48-bit insn. */
- return 1;
- }
-
- /* Look for negative values. These are best to load with LGHI. */
- if (val < 0 && val == (int32_t)val) {
- return 0;
- }
-
- return 1;
-}
-
/* Test if a constant matches the constraint. */
static int tcg_target_const_match(tcg_target_long val, TCGType type,
const TCGArgConstraint *arg_ct)
@@ -499,10 +445,10 @@ static int tcg_target_const_match(tcg_target_long val, TCGType type,
return val == (int32_t)val;
} else if (ct & TCG_CT_CONST_S33) {
return val >= -0xffffffffll && val <= 0xffffffffll;
- } else if (ct & TCG_CT_CONST_ORI) {
- return tcg_match_ori(type, val);
- } else if (ct & TCG_CT_CONST_XORI) {
- return tcg_match_xori(type, val);
+ } else if (ct & TCG_CT_CONST_NN16) {
+ return !(val < 0 && val == (int16_t)val);
+ } else if (ct & TCG_CT_CONST_NN32) {
+ return !(val < 0 && val == (int32_t)val);
} else if (ct & TCG_CT_CONST_U31) {
return val >= 0 && val <= 0x7fffffff;
} else if (ct & TCG_CT_CONST_ZERO) {
@@ -2222,11 +2168,12 @@ static const TCGTargetOpDef *tcg_target_op_def(TCGOpcode op)
static const TCGTargetOpDef r_rC = { .args_ct_str = { "r", "rC" } };
static const TCGTargetOpDef r_rZ = { .args_ct_str = { "r", "rZ" } };
static const TCGTargetOpDef r_r_ri = { .args_ct_str = { "r", "r", "ri" } };
+ static const TCGTargetOpDef r_0_r = { .args_ct_str = { "r", "0", "r" } };
static const TCGTargetOpDef r_0_ri = { .args_ct_str = { "r", "0", "ri" } };
static const TCGTargetOpDef r_0_rI = { .args_ct_str = { "r", "0", "rI" } };
static const TCGTargetOpDef r_0_rJ = { .args_ct_str = { "r", "0", "rJ" } };
- static const TCGTargetOpDef r_0_rO = { .args_ct_str = { "r", "0", "rO" } };
- static const TCGTargetOpDef r_0_rX = { .args_ct_str = { "r", "0", "rX" } };
+ static const TCGTargetOpDef r_0_rN = { .args_ct_str = { "r", "0", "rN" } };
+ static const TCGTargetOpDef r_0_rM = { .args_ct_str = { "r", "0", "rM" } };
static const TCGTargetOpDef a2_r
= { .args_ct_str = { "r", "r", "0", "1", "r", "r" } };
static const TCGTargetOpDef a2_ri
@@ -2275,11 +2222,29 @@ static const TCGTargetOpDef *tcg_target_op_def(TCGOpcode op)
return (s390_facilities & FACILITY_GEN_INST_EXT ? &r_0_rJ : &r_0_rI);
case INDEX_op_or_i32:
+ /* The use of [iNM] constraints are optimization only, since a full
+ 64-bit immediate OR can always be performed with 4 sequential
+ OI[LH][LH] instructions. By rejecting certain negative ranges,
+ the immediate load plus the reg-reg OR is smaller. */
+ return (s390_facilities & FACILITY_EXT_IMM
+ ? &r_0_ri
+ : &r_0_rN);
case INDEX_op_or_i64:
- return &r_0_rO;
+ return (s390_facilities & FACILITY_EXT_IMM
+ ? &r_0_rM
+ : &r_0_rN);
+
case INDEX_op_xor_i32:
+ /* Without EXT_IMM, no immediates are supported. Otherwise,
+ rejecting certain negative ranges leads to smaller code. */
+ return (s390_facilities & FACILITY_EXT_IMM
+ ? &r_0_ri
+ : &r_0_r);
case INDEX_op_xor_i64:
- return &r_0_rX;
+ return (s390_facilities & FACILITY_EXT_IMM
+ ? &r_0_rM
+ : &r_0_r);
+
case INDEX_op_and_i32:
case INDEX_op_and_i64:
return &r_0_ri;
--
2.13.3
next prev parent reply other threads:[~2017-08-04 5:28 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-04 5:28 [Qemu-devel] [PATCH for-2.11 0/8] tcg/s390 improvments Richard Henderson
2017-08-04 5:28 ` [Qemu-devel] [PULL for-2.10 1/3] tcg/arm: Fix runtime overalignment test Richard Henderson
2017-08-04 5:28 ` [Qemu-devel] [PATCH 1/8] tcg/s390: Fully convert tcg_target_op_def Richard Henderson
2017-08-04 5:28 ` [Qemu-devel] [PULL for-2.10 2/3] target/s390x: Fix CSST for 16-byte store Richard Henderson
2017-08-04 5:28 ` [Qemu-devel] [PATCH 2/8] tcg/s390: Merge cmpi facilities check to tcg_target_op_def Richard Henderson
2017-08-04 5:28 ` [Qemu-devel] [PULL for-2.10 3/3] tcg: Increase minimum alignment from tcg_malloc to 8 Richard Henderson
2017-08-04 5:28 ` [Qemu-devel] [PATCH 3/8] tcg/s390: Merge muli facilities check to tcg_target_op_def Richard Henderson
2017-08-04 5:28 ` [Qemu-devel] [PATCH 4/8] tcg/s390: Merge add2i " Richard Henderson
2017-08-04 5:28 ` Richard Henderson [this message]
2017-08-04 5:28 ` [Qemu-devel] [PATCH 6/8] tcg/s390: Use distinct-operands facility Richard Henderson
2017-08-04 5:28 ` [Qemu-devel] [PATCH 7/8] tcg/s390: Use load-on-condition-2 facility Richard Henderson
2017-08-04 5:28 ` [Qemu-devel] [PATCH 8/8] tcg/s390: Use slbgr for setcond le and leu Richard Henderson
2017-08-04 5:50 ` [Qemu-devel] [PATCH for-2.11 0/8] tcg/s390 improvments no-reply
2017-08-04 7:20 ` Fam Zheng
2017-08-04 5:53 ` no-reply
-- strict thread matches above, loose matches on Subject: below --
2017-08-29 20:47 [Qemu-devel] [PATCH 0/8] tcg/s390 improvements Richard Henderson
2017-08-29 20:47 ` [Qemu-devel] [PATCH 5/8] tcg/s390: Merge ori+xori facilities check to tcg_target_op_def Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170804052833.10187-9-rth@twiddle.net \
--to=rth@twiddle.net \
--cc=agraf@suse.de \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.