All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Darrick J. Wong" <darrick.wong@oracle.com>
To: eguan@redhat.com
Cc: linux-xfs@vger.kernel.org, fstests@vger.kernel.org,
	Brian Foster <bfoster@redhat.com>
Subject: [PATCH v3 3/5] common/inject: refactor helpers to use new errortag interface
Date: Fri, 4 Aug 2017 08:37:07 -0700	[thread overview]
Message-ID: <20170804153707.GA24087@magnolia> (raw)
In-Reply-To: <150067468569.30639.11717903404151243816.stgit@magnolia>

Refactor the XFS error injection helpers to use the new errortag
interface to configure error injection.  If that isn't present, fall
back either to the xfs_io/ioctl based injection or the older sysfs
knobs.  Refactor existing testcases to use the new helpers.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
v3: fix _notrun to _fail when we can't set a knob to a particular value
v2: fix name of the 'find knob' function to communicate that it takes a
mountpoint's device, not the mountpoint itself; check for debug before
we check for knobs
---
 common/inject |   59 +++++++++++++++++++++++++++++++++++++++++++++++++++++++--
 tests/xfs/141 |    5 +++--
 tests/xfs/196 |   17 ++++++----------
 3 files changed, 66 insertions(+), 15 deletions(-)

diff --git a/common/inject b/common/inject
index 8ecc290..f30d0ba 100644
--- a/common/inject
+++ b/common/inject
@@ -35,12 +35,49 @@ _require_error_injection()
 	esac
 }
 
+# Find the errortag injection knob in sysfs for a given xfs mount's
+# block device.
+_find_xfs_mountdev_errortag_knob()
+{
+	dev="$1"
+	knob="$2"
+	shortdev="$(_short_dev "${dev}")"
+	tagfile="/sys/fs/xfs/${shortdev}/errortag/${knob}"
+
+	# Some of the new sysfs errortag knobs were previously available via
+	# another sysfs path.
+	case "${knob}" in
+	"log_bad_crc")
+		if [ ! -w "${tagfile}" ]; then
+			tagfile="/sys/fs/xfs/${shortdev}/log/log_badcrc_factor"
+		fi
+		;;
+	"drop_writes")
+		if [ ! -w "${tagfile}" ]; then
+			tagfile="/sys/fs/xfs/${shortdev}/drop_writes"
+		fi
+		if [ ! -w "${tagfile}" ]; then
+			tagfile="/sys/fs/xfs/${shortdev}/fail_writes"
+		fi
+		;;
+	*)
+		;;
+	esac
+
+	echo "${tagfile}"
+}
+
 # Requires that xfs_io inject command knows about this error type
 _require_xfs_io_error_injection()
 {
 	type="$1"
 	_require_error_injection
 
+	# Can we find the error injection knobs via the new errortag
+	# configuration mechanism?
+	knob="$(_find_xfs_mountdev_errortag_knob "${TEST_DEV}" "${type}")"
+	test -w "${knob}" && return
+
 	# NOTE: We can't actually test error injection here because xfs
 	# hasn't always range checked the argument to xfs_errortag_add.
 	# We also don't want to trip an error before we're ready to deal
@@ -54,16 +91,34 @@ _require_xfs_io_error_injection()
 _test_inject_error()
 {
 	type="$1"
+	value="$2"
 
-	$XFS_IO_PROG -x -c "inject $type" $TEST_DIR
+	knob="$(_find_xfs_mountdev_errortag_knob "${TEST_DEV}" "${type}")"
+	if [ -w "${knob}" ]; then
+		test -z "${value}" && value="default"
+		echo -n "${value}" > "${knob}"
+	elif [ -z "${value}" ] || [ "${value}" = "default" ]; then
+		$XFS_IO_PROG -x -c "inject $type" $TEST_DIR
+	else
+		_fail "Cannot inject error ${type} value ${value}."
+	fi
 }
 
 # Inject an error into the scratch fs
 _scratch_inject_error()
 {
 	type="$1"
+	value="$2"
 
-	$XFS_IO_PROG -x -c "inject $type" $SCRATCH_MNT
+	knob="$(_find_xfs_mountdev_errortag_knob "${SCRATCH_DEV}" "${type}")"
+	if [ -w "${knob}" ]; then
+		test -z "${value}" && value="default"
+		echo -n "${value}" > "${knob}"
+	elif [ -z "${value}" ] || [ "${value}" = "default" ]; then
+		$XFS_IO_PROG -x -c "inject $type" $SCRATCH_MNT
+	else
+		_fail "Cannot inject error ${type} value ${value}."
+	fi
 }
 
 # Unmount and remount the scratch device, dumping the log
diff --git a/tests/xfs/141 b/tests/xfs/141
index 56ff14e..f61e524 100755
--- a/tests/xfs/141
+++ b/tests/xfs/141
@@ -47,13 +47,14 @@ rm -f $seqres.full
 
 # get standard environment, filters and checks
 . ./common/rc
+. ./common/inject
 
 # real QA test starts here
 
 # Modify as appropriate.
 _supported_fs xfs
 _supported_os Linux
-_require_xfs_sysfs $(_short_dev $TEST_DEV)/log/log_badcrc_factor
+_require_xfs_io_error_injection "log_bad_crc"
 _require_scratch
 _require_command "$KILLALL_PROG" killall
 
@@ -69,7 +70,7 @@ for i in $(seq 1 5); do
 	# (increase this value to run fsstress longer).
 	factor=$((RANDOM % 100 + 1))
 	echo iteration $i log_badcrc_factor: $factor >> $seqres.full 2>&1
-	echo $factor > /sys/fs/xfs/$sdev/log/log_badcrc_factor
+	_scratch_inject_error "log_bad_crc" "$factor"
 
 	# Run fsstress until the filesystem shuts down. It will shut down
 	# automatically when error injection triggers.
diff --git a/tests/xfs/196 b/tests/xfs/196
index e9b0649..fe3f570 100755
--- a/tests/xfs/196
+++ b/tests/xfs/196
@@ -45,6 +45,7 @@ _cleanup()
 # get standard environment, filters and checks
 . ./common/rc
 . ./common/punch
+. ./common/inject
 
 # real QA test starts here
 rm -f $seqres.full
@@ -53,13 +54,7 @@ rm -f $seqres.full
 _supported_fs generic
 _supported_os Linux
 _require_scratch
-
-DROP_WRITES="drop_writes"
-# replace "drop_writes" with "fail_writes" for old kernel
-if [ -f /sys/fs/xfs/$(_short_dev $TEST_DEV)/fail_writes ];then
-	DROP_WRITES="fail_writes"
-fi
-_require_xfs_sysfs $(_short_dev $TEST_DEV)/${DROP_WRITES}
+_require_xfs_io_error_injection "drop_writes"
 
 _scratch_mkfs >/dev/null 2>&1
 _scratch_mount
@@ -72,7 +67,7 @@ bytes=$((64 * 1024))
 $XFS_IO_PROG -f -c "pwrite 0 $bytes" $file >> $seqres.full 2>&1
 
 # Enable write drops. All buffered writes are dropped from this point on.
-echo 1 > /sys/fs/xfs/$sdev/$DROP_WRITES
+_scratch_inject_error "drop_writes" 1
 
 # Write every other 4k range to split the larger delalloc extent into many more
 # smaller extents. Use pwrite because with write failures enabled, all
@@ -89,7 +84,7 @@ for i in $(seq 4096 8192 $endoff); do
 	$XFS_IO_PROG -c "pwrite $i 4k" $file >> $seqres.full 2>&1
 done
 
-echo 0 > /sys/fs/xfs/$sdev/$DROP_WRITES
+_scratch_inject_error "drop_writes" 0
 
 _scratch_cycle_mount
 $XFS_IO_PROG -c 'bmap -vp' $file | _filter_bmap
@@ -104,9 +99,9 @@ for offset in $(seq 0 100 500); do
 	$XFS_IO_PROG -fc "pwrite ${offset}m 100m" $file >> $seqres.full 2>&1
 
 	punchoffset=$((offset + 75))
-	echo 1 > /sys/fs/xfs/$sdev/$DROP_WRITES
+	_scratch_inject_error "drop_writes"
 	$XFS_IO_PROG -c "pwrite ${punchoffset}m 4k" $file >> $seqres.full 2>&1
-	echo 0 > /sys/fs/xfs/$sdev/$DROP_WRITES
+	_scratch_inject_error "drop_writes" 0
 done
 
 echo "Silence is golden."

  parent reply	other threads:[~2017-08-04 15:37 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-21 22:04 [PATCH 0/5] miscellaneous tests Darrick J. Wong
2017-07-21 22:04 ` [PATCH 1/5] xfs: only run scrub in dry run mode Darrick J. Wong
2017-07-21 22:04 ` [PATCH 2/5] ext4: fsmap tests Darrick J. Wong
2017-07-21 22:04 ` [PATCH 3/5] common/inject: refactor helpers to use new errortag interface Darrick J. Wong
2017-08-02  8:37   ` Eryu Guan
2017-08-02 14:30     ` Brian Foster
2017-08-02 15:52       ` Darrick J. Wong
2017-08-02 16:29         ` Brian Foster
2017-08-03  0:56         ` Eryu Guan
2017-08-03 15:49   ` [PATCH v2 " Darrick J. Wong
2017-08-04  0:45     ` Eryu Guan
2017-08-04 15:32       ` Darrick J. Wong
2017-08-04 15:37   ` Darrick J. Wong [this message]
2017-07-21 22:04 ` [PATCH 4/5] common/populate: enable xfs quota accounting Darrick J. Wong
2017-08-04  1:54   ` Eryu Guan
2017-08-08 21:24     ` Darrick J. Wong
2017-08-04  2:22   ` Eryu Guan
2017-08-08 21:22     ` Darrick J. Wong
2017-08-23 22:03       ` Darrick J. Wong
2017-08-24  3:23         ` Eryu Guan
2017-07-21 22:04 ` [PATCH 5/5] xfs: test fuzzing every field of a dquot Darrick J. Wong
2017-08-24  9:03   ` Eryu Guan
2017-08-24 17:37     ` Darrick J. Wong
2017-08-04  7:00 ` [PATCH 0/5] miscellaneous tests Eryu Guan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170804153707.GA24087@magnolia \
    --to=darrick.wong@oracle.com \
    --cc=bfoster@redhat.com \
    --cc=eguan@redhat.com \
    --cc=fstests@vger.kernel.org \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.