From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v2 04/14] powerpc/64: cleanup __check_irq_replay
Date: Sat, 12 Aug 2017 02:39:02 +1000 [thread overview]
Message-ID: <20170811163912.28783-5-npiggin@gmail.com> (raw)
In-Reply-To: <20170811163912.28783-1-npiggin@gmail.com>
Move the clearing of irq_happened bits into the condition where
they were found to be set. This reduces instruction count slightly,
and reduces stores into irq_happened.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/irq.c | 45 +++++++++++++++++++++++----------------------
1 file changed, 23 insertions(+), 22 deletions(-)
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index f291f7826abc..7c46e0cce054 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -143,9 +143,10 @@ notrace unsigned int __check_irq_replay(void)
*/
unsigned char happened = local_paca->irq_happened;
- /* Clear bit 0 which we wouldn't clear otherwise */
- local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
if (happened & PACA_IRQ_HARD_DIS) {
+ /* Clear bit 0 which we wouldn't clear otherwise */
+ local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
+
/*
* We may have missed a decrementer interrupt if hard disabled.
* Check the decrementer register in case we had a rollover
@@ -173,39 +174,39 @@ notrace unsigned int __check_irq_replay(void)
* This is a higher priority interrupt than the others, so
* replay it first.
*/
- local_paca->irq_happened &= ~PACA_IRQ_HMI;
- if (happened & PACA_IRQ_HMI)
+ if (happened & PACA_IRQ_HMI) {
+ local_paca->irq_happened &= ~PACA_IRQ_HMI;
return 0xe60;
+ }
- /*
- * We may have missed a decrementer interrupt. We check the
- * decrementer itself rather than the paca irq_happened field
- * in case we also had a rollover while hard disabled
- */
- local_paca->irq_happened &= ~PACA_IRQ_DEC;
- if (happened & PACA_IRQ_DEC)
+ if (happened & PACA_IRQ_DEC) {
+ local_paca->irq_happened &= ~PACA_IRQ_DEC;
return 0x900;
+ }
- /* Finally check if an external interrupt happened */
- local_paca->irq_happened &= ~PACA_IRQ_EE;
- if (happened & PACA_IRQ_EE)
+ if (happened & PACA_IRQ_EE) {
+ local_paca->irq_happened &= ~PACA_IRQ_EE;
return 0x500;
+ }
#ifdef CONFIG_PPC_BOOK3E
- /* Finally check if an EPR external interrupt happened
- * this bit is typically set if we need to handle another
- * "edge" interrupt from within the MPIC "EPR" handler
+ /*
+ * Check if an EPR external interrupt happened this bit is typically
+ * set if we need to handle another "edge" interrupt from within the
+ * MPIC "EPR" handler.
*/
- local_paca->irq_happened &= ~PACA_IRQ_EE_EDGE;
- if (happened & PACA_IRQ_EE_EDGE)
+ if (happened & PACA_IRQ_EE_EDGE) {
+ local_paca->irq_happened &= ~PACA_IRQ_EE_EDGE;
return 0x500;
+ }
- local_paca->irq_happened &= ~PACA_IRQ_DBELL;
- if (happened & PACA_IRQ_DBELL)
+ if (happened & PACA_IRQ_DBELL) {
+ local_paca->irq_happened &= ~PACA_IRQ_DBELL;
return 0x280;
+ }
#else
- local_paca->irq_happened &= ~PACA_IRQ_DBELL;
if (happened & PACA_IRQ_DBELL) {
+ local_paca->irq_happened &= ~PACA_IRQ_DBELL;
if (cpu_has_feature(CPU_FTR_HVMODE))
return 0xe80;
return 0xa00;
--
2.13.3
next prev parent reply other threads:[~2017-08-11 16:39 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-11 16:38 [PATCH v2 00/14] idle and soft-irq improvements and POWER9 idle optimisation Nicholas Piggin
2017-08-11 16:38 ` [PATCH v2 01/14] powerpc/64s: masked interrupt avoid branch Nicholas Piggin
2017-08-24 12:37 ` [v2,01/14] " Michael Ellerman
2017-08-11 16:39 ` [PATCH v2 02/14] powerpc/64s: masked interrupt avoid instruction Nicholas Piggin
2017-08-11 16:39 ` [PATCH v2 03/14] powerpc/64s: masked interrupt returns to kernel so avoid r13 restore Nicholas Piggin
2017-08-11 16:39 ` Nicholas Piggin [this message]
2017-08-11 16:39 ` [PATCH v2 05/14] powerpc/64s: irq replay merge HV and non-HV paths for doorbell replay Nicholas Piggin
2017-08-11 16:39 ` [PATCH v2 06/14] powerpc/64s: irq replay external use the HV handler in HV mode on POWER9 Nicholas Piggin
2017-08-11 16:39 ` [PATCH v2 07/14] powerpc/64: remove redundant instruction in interrupt replay Nicholas Piggin
2017-08-11 16:39 ` [PATCH v2 08/14] powerpc/64s: irq replay remove spurious irq reason Nicholas Piggin
2017-08-11 16:39 ` [PATCH v2 09/14] powerpc/64: runlatch CTRL[RUN] set optimisation Nicholas Piggin
2017-08-11 16:39 ` [PATCH v2 10/14] KVM: PPC: Book3S HV: POWER9 does not require secondary thread management Nicholas Piggin
2017-08-11 16:39 ` Nicholas Piggin
2017-08-24 9:34 ` Paul Mackerras
2017-08-24 9:34 ` Paul Mackerras
2017-08-24 12:45 ` Nicholas Piggin
2017-08-24 12:45 ` Nicholas Piggin
2017-08-11 16:39 ` [PATCH v2 11/14] powerpc/64s: idle POWER9 can execute stop without a sync sequence Nicholas Piggin
2017-08-11 16:39 ` Nicholas Piggin
2017-08-11 16:39 ` [PATCH v2 12/14] KVM: PPC: Book3S HV: " Nicholas Piggin
2017-08-11 16:39 ` Nicholas Piggin
2017-08-24 10:27 ` Paul Mackerras
2017-08-24 10:27 ` Paul Mackerras
2017-08-24 12:53 ` Nicholas Piggin
2017-08-24 12:53 ` Nicholas Piggin
2017-08-11 16:39 ` [PATCH v2 13/14] powerpc/64s: idle POWER9 can execute stop in virtual mode Nicholas Piggin
2017-08-11 16:39 ` Nicholas Piggin
2017-08-11 16:39 ` [PATCH v2 14/14] powerpc/64s: idle ESL=0 stop can avoid MSR and save/restore overhead Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170811163912.28783-5-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.