Re: [PATCH 2/2] iio: accel: st_accel: fix data-ready line configuration

[Jonathan Cameron <jic23@kernel.org>]

On Fri, 11 Aug 2017 21:44:14 +0200
Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote:

> Remove int2 configuration parameter for LIS3DH, LSM303DLHC, LSM330D,
> LSM330DL, LSM330DLC, LSM303AGR, LIS2DH12 and LNG2DM since these devices
> export just int1 as data-ready line
> 
> Fixes: 23cde4d65cc7 (iio: Added platform data to select the DRDY pin)
> Fixes: dcdb0a78cab3 (iio: accel: st_accel: add support to lng2dm)
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.

Thanks,

Jonathan
> ---
>  drivers/iio/accel/st_accel_core.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
> index 1e0eea110fa9..752856b3a849 100644
> --- a/drivers/iio/accel/st_accel_core.c
> +++ b/drivers/iio/accel/st_accel_core.c
> @@ -161,7 +161,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
>  		.drdy_irq = {
>  			.addr = 0x22,
>  			.mask_int1 = 0x10,
> -			.mask_int2 = 0x08,
> +			.mask_int2 = 0x00,
>  			.addr_ihl = 0x25,
>  			.mask_ihl = 0x02,
>  			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
> @@ -637,7 +637,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
>  		.drdy_irq = {
>  			.addr = 0x22,
>  			.mask_int1 = 0x10,
> -			.mask_int2 = 0x08,
> +			.mask_int2 = 0x00,
>  			.addr_ihl = 0x25,
>  			.mask_ihl = 0x02,
>  			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,