From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Linus Walleij <linus.walleij@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Marc Zyngier <marc.zyngier@arm.com>,
Jonathan Corbet <corbet@lwn.net>,
Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>,
Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-doc@vger.kernel.org, Bartosz Golaszewski <brgl@bgdev.pl>
Subject: [PATCH v4 3/3] gpio: mockup: use irq_sim
Date: Mon, 14 Aug 2017 16:53:18 +0200 [thread overview]
Message-ID: <20170814145318.6495-4-brgl@bgdev.pl> (raw)
In-Reply-To: <20170814145318.6495-1-brgl@bgdev.pl>
Shrink the driver by removing the code dealing with dummy interrupts
and replacing it with calls to the irq_sim API.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/gpio/Kconfig | 2 +-
drivers/gpio/gpio-mockup.c | 77 +++++-----------------------------------------
2 files changed, 8 insertions(+), 71 deletions(-)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 461d6fc3688b..f858faa5731a 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -311,7 +311,7 @@ config GPIO_MOCKUP
depends on GPIOLIB && SYSFS
select GPIO_SYSFS
select GPIOLIB_IRQCHIP
- select IRQ_WORK
+ select IRQ_SIM
help
This enables GPIO Testing driver, which provides a way to test GPIO
subsystem through sysfs(or char device) and debugfs. GPIO_SYSFS
diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c
index a6565e128f9e..6db7163e6d98 100644
--- a/drivers/gpio/gpio-mockup.c
+++ b/drivers/gpio/gpio-mockup.c
@@ -20,7 +20,7 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/irq_work.h>
+#include <linux/irq_sim.h>
#include <linux/debugfs.h>
#include <linux/uaccess.h>
@@ -47,18 +47,12 @@ enum {
struct gpio_mockup_line_status {
int dir;
bool value;
- bool irq_enabled;
-};
-
-struct gpio_mockup_irq_context {
- struct irq_work work;
- int irq;
};
struct gpio_mockup_chip {
struct gpio_chip gc;
struct gpio_mockup_line_status *lines;
- struct gpio_mockup_irq_context irq_ctx;
+ struct irq_sim irqsim;
struct dentry *dbg_dir;
};
@@ -144,65 +138,11 @@ static int gpio_mockup_name_lines(struct device *dev,
return 0;
}
-static int gpio_mockup_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
- return chip->irq_base + offset;
-}
-
-static void gpio_mockup_irqmask(struct irq_data *data)
+static int gpio_mockup_to_irq(struct gpio_chip *gc, unsigned int offset)
{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
struct gpio_mockup_chip *chip = gpiochip_get_data(gc);
- chip->lines[data->irq - gc->irq_base].irq_enabled = false;
-}
-
-static void gpio_mockup_irqunmask(struct irq_data *data)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
- struct gpio_mockup_chip *chip = gpiochip_get_data(gc);
-
- chip->lines[data->irq - gc->irq_base].irq_enabled = true;
-}
-
-static struct irq_chip gpio_mockup_irqchip = {
- .name = GPIO_MOCKUP_NAME,
- .irq_mask = gpio_mockup_irqmask,
- .irq_unmask = gpio_mockup_irqunmask,
-};
-
-static void gpio_mockup_handle_irq(struct irq_work *work)
-{
- struct gpio_mockup_irq_context *irq_ctx;
-
- irq_ctx = container_of(work, struct gpio_mockup_irq_context, work);
- handle_simple_irq(irq_to_desc(irq_ctx->irq));
-}
-
-static int gpio_mockup_irqchip_setup(struct device *dev,
- struct gpio_mockup_chip *chip)
-{
- struct gpio_chip *gc = &chip->gc;
- int irq_base, i;
-
- irq_base = devm_irq_alloc_descs(dev, -1, 0, gc->ngpio, 0);
- if (irq_base < 0)
- return irq_base;
-
- gc->irq_base = irq_base;
- gc->irqchip = &gpio_mockup_irqchip;
-
- for (i = 0; i < gc->ngpio; i++) {
- irq_set_chip(irq_base + i, gc->irqchip);
- irq_set_chip_data(irq_base + i, gc);
- irq_set_handler(irq_base + i, &handle_simple_irq);
- irq_modify_status(irq_base + i,
- IRQ_NOREQUEST | IRQ_NOAUTOEN, IRQ_NOPROBE);
- }
-
- init_irq_work(&chip->irq_ctx.work, gpio_mockup_handle_irq);
-
- return 0;
+ return irq_sim_irqnum(&chip->irqsim, offset);
}
static ssize_t gpio_mockup_event_write(struct file *file,
@@ -228,11 +168,8 @@ static ssize_t gpio_mockup_event_write(struct file *file,
chip = priv->chip;
gc = &chip->gc;
- if (chip->lines[priv->offset].irq_enabled) {
- gpiod_set_value_cansleep(desc, val);
- priv->chip->irq_ctx.irq = gc->irq_base + priv->offset;
- irq_work_queue(&priv->chip->irq_ctx.work);
- }
+ gpiod_set_value_cansleep(desc, val);
+ irq_sim_fire(&chip->irqsim, priv->offset);
return size;
}
@@ -319,7 +256,7 @@ static int gpio_mockup_add(struct device *dev,
return ret;
}
- ret = gpio_mockup_irqchip_setup(dev, chip);
+ ret = devm_irq_sim_init(dev, &chip->irqsim, gc->ngpio);
if (ret)
return ret;
--
2.13.2
next prev parent reply other threads:[~2017-08-14 14:53 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-14 14:53 [PATCH v4 0/3] simulated interrupts Bartosz Golaszewski
2017-08-14 14:53 ` [PATCH v4 1/3] irq/irq_sim: add a simple interrupt simulator framework Bartosz Golaszewski
2017-08-16 14:46 ` [tip:irq/core] genirq/irq_sim: Add " tip-bot for Bartosz Golaszewski
2017-08-14 14:53 ` [PATCH v4 2/3] irq/irq_sim: add a devres variant of irq_sim_init() Bartosz Golaszewski
2017-08-16 14:46 ` [tip:irq/core] genirq/irq_sim: Add " tip-bot for Bartosz Golaszewski
2017-08-14 14:53 ` Bartosz Golaszewski [this message]
2017-08-16 14:44 ` [PATCH v4 0/3] simulated interrupts Thomas Gleixner
2017-08-20 22:11 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170814145318.6495-4-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=bamvor.zhangjian@linaro.org \
--cc=corbet@lwn.net \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.