From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: imx7d-pico: Add Wifi support
Date: Fri, 18 Aug 2017 09:51:55 +0800 [thread overview]
Message-ID: <20170818015154.GI7608@dragon> (raw)
In-Reply-To: <1502994320-27614-1-git-send-email-vanessa.maegima@nxp.com>
On Thu, Aug 17, 2017 at 03:25:20PM -0300, Vanessa Maegima wrote:
> imx7d-pico has an ap6212 wifi chip connected to usdhc2 port.
>
> Add support for the usdhc2 port and to the WL_REG_ON regulator
> so Wifi can be functional on this board.
>
> Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
> ---
> arch/arm/boot/dts/imx7d-pico.dts | 40 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dts
> index e78c2c9..db9f345 100644
> --- a/arch/arm/boot/dts/imx7d-pico.dts
> +++ b/arch/arm/boot/dts/imx7d-pico.dts
> @@ -52,6 +52,17 @@
> reg = <0x80000000 0x80000000>;
> };
>
> + reg_ap6212: regulator-ap6212 {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_reg_ap6212>;
> + regulator-name = "AP6212";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
Bad indentation.
> + };
> +
> reg_2p5v: regulator-2p5v {
> compatible = "regulator-fixed";
> regulator-name = "2P5V";
> @@ -271,6 +282,17 @@
> status = "okay";
> };
>
> +&usdhc2 { /* Wifi SDIO */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + no-1-8-v;
> + non-removable;
> + keep-power-in-suspend;
> + wakeup-source;
> + vmmc-supply = <®_ap6212>;
> + status = "okay";
> +};
> +
> &usdhc3 {
> pinctrl-names = "default", "state_100mhz", "state_200mhz";
> pinctrl-0 = <&pinctrl_usdhc3>;
> @@ -326,6 +348,13 @@
> >;
> };
>
> + pinctrl_reg_ap6212: regap6212grp {
> + fsl,pins = <
> + MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x59
> + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x59 /* WL_HOST_WAKE */
I only see gpio4_16 is used in regulator-ap6212. Why do we need to set
up GPIO4_IO19 here?
Shawn
> + >;
> + };
> +
> pinctrl_sai1: sai1grp {
> fsl,pins = <
> MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
> @@ -348,6 +377,17 @@
> >;
> };
>
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX7D_PAD_SD2_CMD__SD2_CMD 0x59
> + MX7D_PAD_SD2_CLK__SD2_CLK 0x19
> + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
> + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
> + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
> + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
> + >;
> + };
> +
> pinctrl_usdhc3: usdhc3grp {
> fsl,pins = <
> MX7D_PAD_SD3_CMD__SD3_CMD 0x59
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2017-08-18 1:51 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-17 18:25 [PATCH] ARM: dts: imx7d-pico: Add Wifi support Vanessa Maegima
2017-08-18 1:51 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170818015154.GI7608@dragon \
--to=shawnguo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.