From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
To: Sean Young <sean@mess.org>
Cc: linux-media@vger.kernel.org
Subject: Re: [GIT PULL FOR v4.14] RC changes (part #1)
Date: Sun, 20 Aug 2017 10:54:26 -0300 [thread overview]
Message-ID: <20170820105426.1f5a6afd@vento.lan> (raw)
In-Reply-To: <20170804151816.2s2rdxjtqvg6g5mj@gofer.mess.org>
Em Fri, 4 Aug 2017 16:18:16 +0100
Sean Young <sean@mess.org> escreveu:
> Hi Mauro,
>
> This is missing David Härdeman lirc cleanups, since they conflict with
> a revert for v4.13.
>
> What we do have is three new RC drivers: ZTE ZX family SoCs, and two
> GPIO drivers for IR TX (one using pwm and another bit banging). These
> two drivers are useful for the Raspberry Pi. Also RC core no longer
> has any dependency on CONFIG_MEDIA_SUPPORT.
>
> Thanks
>
> Sean
>
>
> The following changes since commit da48c948c263c9d87dfc64566b3373a858cc8aa2:
>
> media: fix warning on v4l2_subdev_call() result interpreted as bool (2017-07-26 13:43:17 -0400)
>
> are available in the git repository at:
>
> git://linuxtv.org/syoung/media_tree.git for-v4.14a
>
> for you to fetch changes up to 7af1952a935c062490dd697cd2cf7c65ee75dc19:
>
> [media] winbond-cir: buffer overrun during transmit (2017-08-04 15:59:50 +0100)
>
> ----------------------------------------------------------------
> Arvind Yadav (2):
> [media] imon: constify attribute_group structures
> [media] rc: constify attribute_group structures
>
> David Härdeman (1):
> [media] rc-core: consistent use of rc_repeat()
>
> Gustavo A. R. Silva (1):
> [media] sir_ir: remove unnecessary static in sir_interrupt()
>
> Heiner Kallweit (1):
> [media] rc: nuvoton: remove rudimentary transmit functionality
>
> Philipp Zabel (2):
> [media] st-rc: explicitly request exclusive reset control
> [media] rc: sunxi-cir: explicitly request exclusive reset control
>
> Sean Wang (4):
> [media] dt-bindings: media: mtk-cir: Add support for MT7622 SoC
> [media] rc: mtk-cir: add platform data to adapt into various hardware
> [media] rc: mtk-cir: add support for MediaTek MT7622 SoC
> [media] rc: mtk-cir: add MAINTAINERS entry for MediaTek CIR driver
>
> Sean Young (10):
> [media] rc-core: do not depend on MEDIA_SUPPORT
> [media] rc-core: rename input_name to device_name
> [media] rc: mce kbd decoder not needed for IR TX drivers
> [media] rc: gpio-ir-tx: add new driver
> [media] rc: pwm-ir-tx: add new driver
> [media] dt-bindings: pwm-ir-tx: Add support for PWM IR Transmitter
> [media] dt-bindings: gpio-ir-tx: add support for GPIO IR Transmitter
> [media] lirc_zilog: driver only sends LIRCCODE
> [media] mceusb: do not read data parameters unless required
> [media] winbond-cir: buffer overrun during transmit
>
> Shawn Guo (3):
> [media] rc: ir-nec-decoder: move scancode composing code into a shared function
> [media] dt-bindings: add bindings document for zx-irdec
> [media] rc: add zx-irdec remote control driver
>
> Yves Lemée (1):
> [media] lirc_zilog: Clean up lirc zilog error codes
>
> .../devicetree/bindings/leds/irled/gpio-ir-tx.txt | 14 ++
> .../devicetree/bindings/leds/irled/pwm-ir-tx.txt | 13 ++
> .../devicetree/bindings/media/mtk-cir.txt | 8 +-
> .../devicetree/bindings/media/zx-irdec.txt | 14 ++
> MAINTAINERS | 17 ++
> arch/arm/configs/imx_v6_v7_defconfig | 2 +-
> arch/arm/configs/omap2plus_defconfig | 2 +-
> arch/arm/configs/sunxi_defconfig | 2 +-
> arch/mips/configs/pistachio_defconfig | 2 +-
> drivers/hid/hid-picolcd_cir.c | 2 +-
> drivers/media/Kconfig | 17 +-
> drivers/media/cec/cec-core.c | 4 +-
> drivers/media/common/siano/smsir.c | 4 +-
> drivers/media/i2c/ir-kbd-i2c.c | 2 +-
> drivers/media/pci/bt8xx/bttv-input.c | 2 +-
> drivers/media/pci/cx23885/cx23885-input.c | 2 +-
> drivers/media/pci/cx88/cx88-input.c | 2 +-
> drivers/media/pci/dm1105/dm1105.c | 2 +-
> drivers/media/pci/mantis/mantis_common.h | 2 +-
> drivers/media/pci/mantis/mantis_input.c | 4 +-
> drivers/media/pci/saa7134/saa7134-input.c | 2 +-
> drivers/media/pci/smipcie/smipcie-ir.c | 4 +-
> drivers/media/pci/smipcie/smipcie.h | 2 +-
> drivers/media/pci/ttpci/budget-ci.c | 2 +-
> drivers/media/rc/Kconfig | 53 ++++-
> drivers/media/rc/Makefile | 3 +
> drivers/media/rc/ati_remote.c | 2 +-
> drivers/media/rc/ene_ir.c | 4 +-
> drivers/media/rc/fintek-cir.c | 2 +-
> drivers/media/rc/gpio-ir-recv.c | 2 +-
> drivers/media/rc/gpio-ir-tx.c | 174 +++++++++++++++
> drivers/media/rc/igorplugusb.c | 2 +-
> drivers/media/rc/iguanair.c | 2 +-
> drivers/media/rc/img-ir/img-ir-hw.c | 2 +-
> drivers/media/rc/img-ir/img-ir-raw.c | 2 +-
> drivers/media/rc/imon.c | 6 +-
> drivers/media/rc/ir-hix5hd2.c | 2 +-
> drivers/media/rc/ir-mce_kbd-decoder.c | 6 +
> drivers/media/rc/ir-nec-decoder.c | 42 +---
> drivers/media/rc/ir-sanyo-decoder.c | 10 +-
> drivers/media/rc/ir-spi.c | 1 +
> drivers/media/rc/ite-cir.c | 2 +-
> drivers/media/rc/keymaps/Makefile | 3 +-
> drivers/media/rc/keymaps/rc-zx-irdec.c | 79 +++++++
> drivers/media/rc/mceusb.c | 38 ++--
> drivers/media/rc/meson-ir.c | 2 +-
> drivers/media/rc/mtk-cir.c | 244 ++++++++++++++++-----
> drivers/media/rc/nuvoton-cir.c | 116 +---------
> drivers/media/rc/nuvoton-cir.h | 24 --
> drivers/media/rc/pwm-ir-tx.c | 138 ++++++++++++
> drivers/media/rc/rc-loopback.c | 2 +-
> drivers/media/rc/rc-main.c | 20 +-
> drivers/media/rc/redrat3.c | 2 +-
> drivers/media/rc/serial_ir.c | 10 +-
> drivers/media/rc/sir_ir.c | 4 +-
> drivers/media/rc/st_rc.c | 4 +-
> drivers/media/rc/streamzap.c | 2 +-
> drivers/media/rc/sunxi-cir.c | 4 +-
> drivers/media/rc/ttusbir.c | 2 +-
> drivers/media/rc/winbond-cir.c | 4 +-
> drivers/media/rc/zx-irdec.c | 183 ++++++++++++++++
> drivers/media/usb/au0828/au0828-input.c | 2 +-
> drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 5 +-
> drivers/media/usb/dvb-usb/dvb-usb-remote.c | 2 +-
> drivers/media/usb/em28xx/em28xx-input.c | 2 +-
> drivers/media/usb/tm6000/tm6000-input.c | 2 +-
> drivers/staging/media/lirc/lirc_zilog.c | 18 +-
> include/media/cec.h | 2 +-
> include/media/rc-core.h | 37 +++-
> include/media/rc-map.h | 1 +
> 70 files changed, 1035 insertions(+), 361 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt
> create mode 100644 Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt
> create mode 100644 Documentation/devicetree/bindings/media/zx-irdec.txt
> create mode 100644 drivers/media/rc/gpio-ir-tx.c
> create mode 100644 drivers/media/rc/keymaps/rc-zx-irdec.c
> create mode 100644 drivers/media/rc/pwm-ir-tx.c
> create mode 100644 drivers/media/rc/zx-irdec.c
Patches applied. Yet, some new drivers were added here.
Please add them to MAINTAINERS.
Regards,
Mauro
Thanks,
Mauro
next prev parent reply other threads:[~2017-08-20 13:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-04 15:18 [GIT PULL FOR v4.14] RC changes (part #1) Sean Young
2017-08-20 13:54 ` Mauro Carvalho Chehab [this message]
2017-08-20 16:58 ` Sean Young
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170820105426.1f5a6afd@vento.lan \
--to=mchehab@s-opensource.com \
--cc=linux-media@vger.kernel.org \
--cc=sean@mess.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.