From: Jan Glauber <jan.glauber@caviumnetworks.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: David Daney <david.daney@cavium.com>,
"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
Rob Herring <robh+dt@kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] mmc: cavium: Fix use-after-free in of_platform_device_destroy
Date: Thu, 7 Sep 2017 14:19:40 +0200 [thread overview]
Message-ID: <20170907121940.GA22336@hc> (raw)
In-Reply-To: <CAPDyKFos=uPbuy1oQREMpE6hyaYbVxhVKSQNWkrE3VyoxzoL8g@mail.gmail.com>
Thanks Uffe. The fix would only be required for 4.13, as only with that the
Cavium GPIO driver became available.
--Jan
On Thu, Sep 07, 2017 at 02:07:01PM +0200, Ulf Hansson wrote:
> On 7 September 2017 at 13:24, Jan Glauber <jglauber@cavium.com> wrote:
> > KASAN reported the following:
> >
> > [ 19.338655] ==================================================================
> > [ 19.345946] BUG: KASAN: use-after-free in of_platform_device_destroy+0x88/0x100
> > [ 19.345966] Read of size 8 at addr fffffe01aa6f1468 by task systemd-udevd/264
> >
> > [ 19.345983] CPU: 1 PID: 264 Comm: systemd-udevd Not tainted 4.13.0-jang+ #737
> > [ 19.345989] Hardware name: Cavium ThunderX CN81XX board (DT)
> > [ 19.345995] Call trace:
> > [ 19.346013] [<fffffc800808b1b0>] dump_backtrace+0x0/0x368
> > [ 19.346026] [<fffffc800808b6bc>] show_stack+0x24/0x30
> > [ 19.346040] [<fffffc8008cbb944>] dump_stack+0xa4/0xc8
> > [ 19.346057] [<fffffc80082c2870>] print_address_description+0x68/0x258
> > [ 19.346070] [<fffffc80082c2d70>] kasan_report+0x238/0x2f8
> > [ 19.346082] [<fffffc80082c14a8>] __asan_load8+0x88/0xb8
> > [ 19.346098] [<fffffc8008aacee0>] of_platform_device_destroy+0x88/0x100
> > [ 19.346131] [<fffffc8000e02fa4>] thunder_mmc_probe+0x314/0x550 [thunderx_mmc]
> > [ 19.346147] [<fffffc800879d560>] pci_device_probe+0x158/0x1f8
> > [ 19.346162] [<fffffc800886e53c>] driver_probe_device+0x394/0x5f8
> > [ 19.346174] [<fffffc800886e8f4>] __driver_attach+0x154/0x158
> > [ 19.346185] [<fffffc800886b12c>] bus_for_each_dev+0xdc/0x140
> > [ 19.346196] [<fffffc800886d9f8>] driver_attach+0x38/0x48
> > [ 19.346207] [<fffffc800886d148>] bus_add_driver+0x290/0x3c8
> > [ 19.346219] [<fffffc800886fc5c>] driver_register+0xbc/0x1a0
> > [ 19.346232] [<fffffc800879b78c>] __pci_register_driver+0xc4/0xd8
> > [ 19.346260] [<fffffc8000e80024>] thunder_mmc_driver_init+0x24/0x10000 [thunderx_mmc]
> > [ 19.346273] [<fffffc8008083a80>] do_one_initcall+0x98/0x1c0
> > [ 19.346289] [<fffffc8008177b54>] do_init_module+0xe0/0x2cc
> > [ 19.346303] [<fffffc8008175cf0>] load_module+0x3238/0x35c0
> > [ 19.346318] [<fffffc8008176438>] SyS_finit_module+0x190/0x1a0
> > [ 19.346329] [<fffffc80080834a0>] __sys_trace_return+0x0/0x4
> >
> > This is caused by:
> >
> > platform_device_register()
> > -> platform_device_unregister(to_platform_device(dev))
> > freeing struct device
> > -> of_node_clear_flag(dev->of_node, ...)
> > writing to the freed device
> >
> > The issue is solved by increasing the reference count before calling
> > of_platform_device_destroy() so freeing the device is postponed after
> > the call.
> >
> > Fixes: 8fb83b142823 ("mmc: cavium: Fix probing race with regulator")
> > Signed-off-by: Jan Glauber <jglauber@cavium.com>
>
> Thanks, applied for fixes and added a stable tag.
>
> Kind regards
> Uffe
>
> > ---
> > drivers/mmc/host/cavium-thunderx.c | 6 +++++-
> > 1 file changed, 5 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mmc/host/cavium-thunderx.c b/drivers/mmc/host/cavium-thunderx.c
> > index b9cc95998799..eee08d81b242 100644
> > --- a/drivers/mmc/host/cavium-thunderx.c
> > +++ b/drivers/mmc/host/cavium-thunderx.c
> > @@ -7,6 +7,7 @@
> > *
> > * Copyright (C) 2016 Cavium Inc.
> > */
> > +#include <linux/device.h>
> > #include <linux/dma-mapping.h>
> > #include <linux/interrupt.h>
> > #include <linux/mmc/mmc.h>
> > @@ -149,8 +150,11 @@ static int thunder_mmc_probe(struct pci_dev *pdev,
> > for (i = 0; i < CAVIUM_MAX_MMC; i++) {
> > if (host->slot[i])
> > cvm_mmc_of_slot_remove(host->slot[i]);
> > - if (host->slot_pdev[i])
> > + if (host->slot_pdev[i]) {
> > + get_device(&host->slot_pdev[i]->dev);
> > of_platform_device_destroy(&host->slot_pdev[i]->dev, NULL);
> > + put_device(&host->slot_pdev[i]->dev);
> > + }
> > }
> > clk_disable_unprepare(host->clk);
> > return ret;
> > --
> > 2.9.0.rc0.21.g7777322
> >
next prev parent reply other threads:[~2017-09-07 12:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-07 11:24 [PATCH] mmc: cavium: Fix use-after-free in of_platform_device_destroy Jan Glauber
2017-09-07 12:07 ` Ulf Hansson
2017-09-07 12:19 ` Jan Glauber [this message]
2017-09-07 12:21 ` Ulf Hansson
2017-09-07 12:33 ` Jan Glauber
2017-09-07 15:00 ` Ulf Hansson
2017-09-07 16:58 ` Rob Herring
2017-09-07 17:15 ` David Daney
2017-09-07 18:14 ` Jan Glauber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170907121940.GA22336@hc \
--to=jan.glauber@caviumnetworks.com \
--cc=david.daney@cavium.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.