All of lore.kernel.org
 help / color / mirror / Atom feed
From: Leon Romanovsky <leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Michal Kalderon
	<Michal.Kalderon-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
Cc: davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org,
	netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
	Ariel Elior <Ariel.Elior-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
Subject: Re: [PATCH net-next 2/4] qed: Add iWARP out of order support
Date: Tue, 19 Sep 2017 20:45:11 +0300	[thread overview]
Message-ID: <20170919174511.GJ5788@mtr-leonro.local> (raw)
In-Reply-To: <1505841979-26365-3-git-send-email-Michal.Kalderon-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>

[-- Attachment #1: Type: text/plain, Size: 6380 bytes --]

On Tue, Sep 19, 2017 at 08:26:17PM +0300, Michal Kalderon wrote:
> iWARP requires OOO support which is already provided by the ll2
> interface (until now was used only for iSCSI offload).
> The changes mostly include opening a ll2 dedicated connection for
> OOO and notifiying the FW about the handle id.
>
> Signed-off-by: Michal Kalderon <Michal.Kalderon-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
> Signed-off-by: Ariel Elior <Ariel.Elior-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
> ---
>  drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 44 +++++++++++++++++++++++++++++
>  drivers/net/ethernet/qlogic/qed/qed_iwarp.h | 11 +++++++-
>  drivers/net/ethernet/qlogic/qed/qed_rdma.c  |  7 +++--
>  3 files changed, 59 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
> index 9d989c9..568e985 100644
> --- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
> +++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
> @@ -41,6 +41,7 @@
>  #include "qed_rdma.h"
>  #include "qed_reg_addr.h"
>  #include "qed_sp.h"
> +#include "qed_ooo.h"
>
>  #define QED_IWARP_ORD_DEFAULT		32
>  #define QED_IWARP_IRD_DEFAULT		32
> @@ -119,6 +120,13 @@ static void qed_iwarp_cid_cleaned(struct qed_hwfn *p_hwfn, u32 cid)
>  	spin_unlock_bh(&p_hwfn->p_rdma_info->lock);
>  }
>
> +void qed_iwarp_init_fw_ramrod(struct qed_hwfn *p_hwfn,
> +			      struct iwarp_init_func_params *p_ramrod)
> +{
> +	p_ramrod->ll2_ooo_q_index = RESC_START(p_hwfn, QED_LL2_QUEUE) +
> +				    p_hwfn->p_rdma_info->iwarp.ll2_ooo_handle;
> +}
> +
>  static int qed_iwarp_alloc_cid(struct qed_hwfn *p_hwfn, u32 *cid)
>  {
>  	int rc;
> @@ -1876,6 +1884,16 @@ static int qed_iwarp_ll2_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
>  		iwarp_info->ll2_syn_handle = QED_IWARP_HANDLE_INVAL;
>  	}
>
> +	if (iwarp_info->ll2_ooo_handle != QED_IWARP_HANDLE_INVAL) {
> +		rc = qed_ll2_terminate_connection(p_hwfn,
> +						  iwarp_info->ll2_ooo_handle);
> +		if (rc)
> +			DP_INFO(p_hwfn, "Failed to terminate ooo connection\n");

What exactly will you do with this knowledge? Anyway you are not
interested in return values of qed_ll2_terminate_connection function in
this place and other places too.

Why don't you handle EAGAIN returned from the qed_ll2_terminate_connection()?

Thanks

> +
> +		qed_ll2_release_connection(p_hwfn, iwarp_info->ll2_ooo_handle);
> +		iwarp_info->ll2_ooo_handle = QED_IWARP_HANDLE_INVAL;
> +	}
> +
>  	qed_llh_remove_mac_filter(p_hwfn,
>  				  p_ptt, p_hwfn->p_rdma_info->iwarp.mac_addr);
>  	return rc;
> @@ -1927,10 +1945,12 @@ static int qed_iwarp_ll2_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
>  	struct qed_iwarp_info *iwarp_info;
>  	struct qed_ll2_acquire_data data;
>  	struct qed_ll2_cbs cbs;
> +	u16 n_ooo_bufs;
>  	int rc = 0;
>
>  	iwarp_info = &p_hwfn->p_rdma_info->iwarp;
>  	iwarp_info->ll2_syn_handle = QED_IWARP_HANDLE_INVAL;
> +	iwarp_info->ll2_ooo_handle = QED_IWARP_HANDLE_INVAL;
>
>  	iwarp_info->max_mtu = params->max_mtu;
>
> @@ -1978,6 +1998,29 @@ static int qed_iwarp_ll2_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
>  	if (rc)
>  		goto err;
>
> +	/* Start OOO connection */
> +	data.input.conn_type = QED_LL2_TYPE_OOO;
> +	data.input.mtu = params->max_mtu;
> +
> +	n_ooo_bufs = (QED_IWARP_MAX_OOO * QED_IWARP_RCV_WND_SIZE_DEF) /
> +		     iwarp_info->max_mtu;
> +	n_ooo_bufs = min_t(u32, n_ooo_bufs, QED_IWARP_LL2_OOO_MAX_RX_SIZE);
> +
> +	data.input.rx_num_desc = n_ooo_bufs;
> +	data.input.rx_num_ooo_buffers = n_ooo_bufs;
> +
> +	data.input.tx_max_bds_per_packet = 1;	/* will never be fragmented */
> +	data.input.tx_num_desc = QED_IWARP_LL2_OOO_DEF_TX_SIZE;
> +	data.p_connection_handle = &iwarp_info->ll2_ooo_handle;
> +
> +	rc = qed_ll2_acquire_connection(p_hwfn, &data);
> +	if (rc)
> +		goto err;
> +
> +	rc = qed_ll2_establish_connection(p_hwfn, iwarp_info->ll2_ooo_handle);
> +	if (rc)
> +		goto err;
> +
>  	return rc;
>  err:
>  	qed_iwarp_ll2_stop(p_hwfn, p_ptt);
> @@ -2014,6 +2057,7 @@ int qed_iwarp_setup(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
>
>  	qed_spq_register_async_cb(p_hwfn, PROTOCOLID_IWARP,
>  				  qed_iwarp_async_event);
> +	qed_ooo_setup(p_hwfn);
>
>  	return qed_iwarp_ll2_start(p_hwfn, params, p_ptt);
>  }
> diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.h b/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
> index 148ef3c..9e2bfde 100644
> --- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
> +++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
> @@ -47,7 +47,12 @@ enum qed_iwarp_qp_state {
>  #define QED_IWARP_LL2_SYN_TX_SIZE       (128)
>  #define QED_IWARP_LL2_SYN_RX_SIZE       (256)
>  #define QED_IWARP_MAX_SYN_PKT_SIZE      (128)
> -#define QED_IWARP_HANDLE_INVAL			(0xff)
> +
> +#define QED_IWARP_LL2_OOO_DEF_TX_SIZE   (256)
> +#define QED_IWARP_MAX_OOO		(16)
> +#define QED_IWARP_LL2_OOO_MAX_RX_SIZE   (16384)
> +
> +#define QED_IWARP_HANDLE_INVAL		(0xff)
>
>  struct qed_iwarp_ll2_buff {
>  	void *data;
> @@ -67,6 +72,7 @@ struct qed_iwarp_info {
>  	u8 crc_needed;
>  	u8 tcp_flags;
>  	u8 ll2_syn_handle;
> +	u8 ll2_ooo_handle;
>  	u8 peer2peer;
>  	enum mpa_negotiation_mode mpa_rev;
>  	enum mpa_rtr_type rtr_type;
> @@ -147,6 +153,9 @@ struct qed_iwarp_listener {
>  int qed_iwarp_setup(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
>  		    struct qed_rdma_start_in_params *params);
>
> +void qed_iwarp_init_fw_ramrod(struct qed_hwfn *p_hwfn,
> +			      struct iwarp_init_func_params *p_ramrod);
> +
>  int qed_iwarp_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt);
>
>  void qed_iwarp_resc_free(struct qed_hwfn *p_hwfn);
> diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
> index 06715f7..4f46f28 100644
> --- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c
> +++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
> @@ -551,10 +551,13 @@ static int qed_rdma_start_fw(struct qed_hwfn *p_hwfn,
>  	if (rc)
>  		return rc;
>
> -	if (QED_IS_IWARP_PERSONALITY(p_hwfn))
> +	if (QED_IS_IWARP_PERSONALITY(p_hwfn)) {
> +		qed_iwarp_init_fw_ramrod(p_hwfn,
> +					 &p_ent->ramrod.iwarp_init_func.iwarp);
>  		p_ramrod = &p_ent->ramrod.iwarp_init_func.rdma;
> -	else
> +	} else {
>  		p_ramrod = &p_ent->ramrod.roce_init_func.rdma;
> +	}
>
>  	p_params_header = &p_ramrod->params_header;
>  	p_params_header->cnq_start_offset = (u8)RESC_START(p_hwfn,
> --
> 1.8.3.1
>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  parent reply	other threads:[~2017-09-19 17:45 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-19 17:26 [PATCH net-next 0/4] qed: iWARP fixes and enhancements Michal Kalderon
2017-09-19 17:26 ` Michal Kalderon
2017-09-19 17:26 ` [PATCH net-next 1/4] qed: Add iWARP enablement support Michal Kalderon
2017-09-19 17:26   ` Michal Kalderon
2017-09-19 17:26 ` [PATCH net-next 2/4] qed: Add iWARP out of order support Michal Kalderon
2017-09-19 17:26   ` Michal Kalderon
     [not found]   ` <1505841979-26365-3-git-send-email-Michal.Kalderon-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
2017-09-19 17:45     ` Leon Romanovsky [this message]
     [not found]       ` <20170919174511.GJ5788-U/DQcQFIOTAAJjI8aNfphQ@public.gmane.org>
2017-09-20  6:03         ` Kalderon, Michal
2017-09-19 17:26 ` [PATCH net-next 3/4] qed: Fix maximum number of CQs for iWARP Michal Kalderon
2017-09-19 17:26   ` Michal Kalderon
     [not found]   ` <1505841979-26365-4-git-send-email-Michal.Kalderon-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
2017-09-19 17:46     ` Leon Romanovsky
2017-09-20  5:46       ` Kalderon, Michal
     [not found]         ` <CY1PR0701MB2012B07A2FCD08D598CCFEDB88610-UpKza+2NMNLHMJvQ0dyT705OhdzP3rhOnBOFsp37pqbUKgpGm//BTAC/G2K4zDHf@public.gmane.org>
2017-09-20 13:50           ` Leon Romanovsky
2017-09-19 17:26 ` [PATCH net-next 4/4] qed: iWARP - Add check for errors on a SYN packet Michal Kalderon
2017-09-19 17:26   ` Michal Kalderon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170919174511.GJ5788@mtr-leonro.local \
    --to=leon-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
    --cc=Ariel.Elior-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org \
    --cc=Michal.Kalderon-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org \
    --cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
    --cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
    --cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.