From: "Pali Rohár" <pali.rohar@gmail.com>
To: Mario Limonciello <mario.limonciello@dell.com>
Cc: dvhart@infradead.org, LKML <linux-kernel@vger.kernel.org>,
platform-driver-x86@vger.kernel.org, quasisec@google.com
Subject: Re: [PATCH 04/12] platform/x86: dell-smbios: Switch to a WMI-ACPI interface
Date: Mon, 25 Sep 2017 18:18:51 +0200 [thread overview]
Message-ID: <20170925161851.GK22190@pali> (raw)
In-Reply-To: <4da87eb0d9722ed906615409586a8b4d7becd65c.1505999739.git.mario.limonciello@dell.com>
On Thursday 21 September 2017 08:57:09 Mario Limonciello wrote:
> The driver currently uses an SMI interface which grants direct access
> to physical memory to the platform via a pointer.
>
> Changing this to operate over WMI-ACPI will use an ACPI OperationRegion
> for a buffer of data storage when platform calls are performed.
>
> This is a safer approach to use in kernel drivers as the platform will
> only have access to that OperationRegion.
In my opinion direct access is safer then using ACPI wrapper for same
functionality.
Anyway, this change would break support for laptops without ACPI-WMI
functionality. IIRC I read in some Dell ACPI-WMI documentation that Dell
SMM via ACPI-WMI is not supported on all machines (probably older
machines) and it is needed to check some vendor bit in DMI data if Dell
SMM ACPI-WMI is really supported.
In linux kernel we do not want to remove support for older machines,
just because machines with new firmware can use also different new
communication method/protocol.
> As a result, this change removes the dependency on this driver on the
> dcdbas kernel module.
>
> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
> ---
> drivers/platform/x86/Kconfig | 8 ++--
> drivers/platform/x86/dell-smbios.c | 76 ++++++++++++++++++++++++++------------
> drivers/platform/x86/dell-smbios.h | 11 +++---
> 3 files changed, 63 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 9e52f05daa2e..81d61c0f4ef8 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -92,13 +92,13 @@ config ASUS_LAPTOP
> If you have an ACPI-compatible ASUS laptop, say Y or M here.
>
> config DELL_SMBIOS
> - tristate
> - select DCDBAS
> + tristate "Dell WMI SMBIOS calling interface"
> + depends on ACPI_WMI
> ---help---
> This module provides common functions for kernel modules using
> - Dell SMBIOS.
> + Dell SMBIOS over ACPI-WMI.
>
> - If you have a Dell laptop, say Y or M here.
> + If you have a Dell computer, say Y or M here.
>
> config DELL_LAPTOP
> tristate "Dell Laptop Extras"
> diff --git a/drivers/platform/x86/dell-smbios.c b/drivers/platform/x86/dell-smbios.c
> index e9b1ca07c872..c06262a89169 100644
> --- a/drivers/platform/x86/dell-smbios.c
> +++ b/drivers/platform/x86/dell-smbios.c
> @@ -4,6 +4,7 @@
> * Copyright (c) Red Hat <mjg@redhat.com>
> * Copyright (c) 2014 Gabriele Mazzotta <gabriele.mzt@gmail.com>
> * Copyright (c) 2014 Pali Rohár <pali.rohar@gmail.com>
> + * Copyright (c) 2017 Dell Inc.
> *
> * Based on documentation in the libsmbios package:
> * Copyright (C) 2005-2014 Dell Inc.
> @@ -18,13 +19,12 @@
> #include <linux/module.h>
> #include <linux/dmi.h>
> #include <linux/err.h>
> -#include <linux/gfp.h>
> #include <linux/mutex.h>
> -#include <linux/slab.h>
> -#include <linux/io.h>
> -#include "../../firmware/dcdbas.h"
> +#include <linux/wmi.h>
> #include "dell-smbios.h"
>
> +#define DELL_WMI_SMBIOS_GUID "A80593CE-A997-11DA-B012-B622A1EF5492"
> +
> struct calling_interface_structure {
> struct dmi_header header;
> u16 cmdIOAddress;
> @@ -76,20 +76,39 @@ void dell_smbios_release_buffer(void)
> }
> EXPORT_SYMBOL_GPL(dell_smbios_release_buffer);
>
> -void dell_smbios_send_request(int class, int select)
> +int run_wmi_smbios_call(struct calling_interface_buffer *buffer)
> {
> - struct smi_cmd command;
> + struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
> + struct acpi_buffer input;
> + union acpi_object *obj;
> + acpi_status status;
> +
> + input.length = sizeof(struct calling_interface_buffer);
> + input.pointer = buffer;
> +
> + status = wmi_evaluate_method(DELL_WMI_SMBIOS_GUID,
> + 0, 1, &input, &output);
> + if (ACPI_FAILURE(status)) {
> + pr_err("%x/%x [%x,%x,%x,%x] call failed\n",
> + buffer->class, buffer->select, buffer->input[0],
> + buffer->input[1], buffer->input[2], buffer->input[3]);
> + return -EIO;
> + }
> + obj = (union acpi_object *)output.pointer;
> + if (obj->type != ACPI_TYPE_BUFFER) {
> + pr_err("invalid type : %d\n", obj->type);
> + return -EIO;
> + }
> + memcpy(buffer, obj->buffer.pointer, input.length);
>
> - command.magic = SMI_CMD_MAGIC;
> - command.command_address = da_command_address;
> - command.command_code = da_command_code;
> - command.ebx = virt_to_phys(buffer);
> - command.ecx = 0x42534931;
> + return 0;
> +}
>
> +void dell_smbios_send_request(int class, int select)
> +{
> buffer->class = class;
> buffer->select = select;
> -
> - dcdbas_smi_request(&command);
> + run_wmi_smbios_call(buffer);
> }
> EXPORT_SYMBOL_GPL(dell_smbios_send_request);
>
> @@ -170,7 +189,7 @@ static void __init find_tokens(const struct dmi_header *dm, void *dummy)
> }
> }
>
> -static int __init dell_smbios_init(void)
> +static int dell_smbios_probe(struct wmi_device *wdev)
> {
> int ret;
>
> @@ -181,11 +200,7 @@ static int __init dell_smbios_init(void)
> return -ENODEV;
> }
>
> - /*
> - * Allocate buffer below 4GB for SMI data--only 32-bit physical addr
> - * is passed to SMI handler.
> - */
> - buffer = (void *)__get_free_page(GFP_KERNEL | GFP_DMA32);
> + buffer = (void *)__get_free_page(GFP_KERNEL);
> if (!buffer) {
> ret = -ENOMEM;
> goto fail_buffer;
> @@ -198,17 +213,32 @@ static int __init dell_smbios_init(void)
> return ret;
> }
>
> -static void __exit dell_smbios_exit(void)
> +static int dell_smbios_remove(struct wmi_device *wdev)
> {
> kfree(da_tokens);
> free_page((unsigned long)buffer);
> + return 0;
> }
>
> -subsys_initcall(dell_smbios_init);
> -module_exit(dell_smbios_exit);
> +static const struct wmi_device_id dell_smbios_id_table[] = {
> + { .guid_string = DELL_WMI_SMBIOS_GUID },
> + { },
> +};
> +
> +static struct wmi_driver dell_smbios_driver = {
> + .driver = {
> + .name = "dell-smbios",
> + },
> + .probe = dell_smbios_probe,
> + .remove = dell_smbios_remove,
> + .id_table = dell_smbios_id_table,
> +};
> +module_wmi_driver(dell_smbios_driver);
> +
>
> MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
> MODULE_AUTHOR("Gabriele Mazzotta <gabriele.mzt@gmail.com>");
> MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
> -MODULE_DESCRIPTION("Common functions for kernel modules using Dell SMBIOS");
> +MODULE_AUTHOR("Mario Limonciello <mario.limonciello@dell.com>");
> +MODULE_DESCRIPTION("Common functions for kernel modules using Dell SMBIOS over WMI");
> MODULE_LICENSE("GPL");
> diff --git a/drivers/platform/x86/dell-smbios.h b/drivers/platform/x86/dell-smbios.h
> index 45cbc2292cd3..e1e29697b362 100644
> --- a/drivers/platform/x86/dell-smbios.h
> +++ b/drivers/platform/x86/dell-smbios.h
> @@ -4,6 +4,7 @@
> * Copyright (c) Red Hat <mjg@redhat.com>
> * Copyright (c) 2014 Gabriele Mazzotta <gabriele.mzt@gmail.com>
> * Copyright (c) 2014 Pali Rohár <pali.rohar@gmail.com>
> + * Copyright (c) 2017 Dell Inc.
> *
> * Based on documentation in the libsmbios package:
> * Copyright (C) 2005-2014 Dell Inc.
> @@ -18,14 +19,14 @@
>
> struct notifier_block;
>
> -/* This structure will be modified by the firmware when we enter
> - * system management mode, hence the volatiles */
> -
> struct calling_interface_buffer {
> u16 class;
> u16 select;
> - volatile u32 input[4];
> - volatile u32 output[4];
> + u32 input[4];
> + u32 output[4];
> + u32 argattrib;
> + u32 blength;
> + u8 data[4052];
> } __packed;
>
> struct calling_interface_token {
--
Pali Rohár
pali.rohar@gmail.com
next prev parent reply other threads:[~2017-09-25 16:18 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-21 13:57 [PATCH 00/12] Introduce support for Dell SMBIOS over WMI Mario Limonciello
2017-09-21 13:57 ` [PATCH 01/12] platform/x86: dell-wmi: label driver as handling notifications Mario Limonciello
2017-09-25 16:04 ` Pali Rohár
2017-09-25 20:14 ` Mario.Limonciello
2017-09-25 20:14 ` Mario.Limonciello
2017-09-27 15:43 ` Darren Hart
2017-09-21 13:57 ` [PATCH 02/12] platform/x86: dell-wmi: Don't match on descriptor GUID modalias Mario Limonciello
2017-09-25 16:06 ` Pali Rohár
2017-09-21 13:57 ` [PATCH 03/12] platform/x86: dell-smbios: Add pr_fmt definition to driver Mario Limonciello
2017-09-21 16:22 ` Andy Shevchenko
2017-09-25 16:07 ` Pali Rohár
2017-09-21 13:57 ` [PATCH 04/12] platform/x86: dell-smbios: Switch to a WMI-ACPI interface Mario Limonciello
2017-09-25 16:18 ` Pali Rohár [this message]
2017-09-25 19:28 ` Mario.Limonciello
2017-09-25 19:28 ` Mario.Limonciello
2017-09-27 16:46 ` Darren Hart
2017-09-27 18:29 ` Mario.Limonciello
2017-09-27 18:29 ` Mario.Limonciello
2017-09-27 19:47 ` Andy Lutomirski
2017-09-27 21:15 ` Mario.Limonciello
2017-09-27 21:15 ` Mario.Limonciello
2017-09-21 13:57 ` [PATCH 05/12] platform/x86: dell-smbios: rename to dell-wmi-smbios Mario Limonciello
2017-09-21 13:57 ` [PATCH 06/12] platform/x86: dell-wmi-smbios: Add a sysfs interface for SMBIOS tokens Mario Limonciello
2017-09-25 16:23 ` Pali Rohár
2017-09-25 17:04 ` Andy Shevchenko
2017-09-25 17:31 ` Mario.Limonciello
2017-09-25 17:31 ` Mario.Limonciello
2017-09-27 16:50 ` Darren Hart
2017-09-27 18:27 ` Mario.Limonciello
2017-09-27 18:27 ` Mario.Limonciello
2017-09-27 18:31 ` Andy Shevchenko
2017-09-27 18:55 ` Darren Hart
2017-09-27 19:49 ` Andy Lutomirski
2017-09-27 19:50 ` Mario.Limonciello
2017-09-27 19:50 ` Mario.Limonciello
2017-09-21 13:57 ` [PATCH 07/12] platform/x86: dell-wmi-smbios: Use Dell WMI descriptor check Mario Limonciello
2017-09-21 16:44 ` Andy Shevchenko
2017-09-21 20:56 ` Mario.Limonciello
2017-09-21 20:56 ` Mario.Limonciello
2017-09-21 13:57 ` [PATCH 08/12] platform/x86: wmi: Cleanup exit routine in reverse order of init Mario Limonciello
2017-09-21 13:57 ` [PATCH 09/12] platform/x86: wmi: create character devices when requested by drivers Mario Limonciello
2017-09-21 16:46 ` Andy Shevchenko
2017-09-21 19:21 ` Mario.Limonciello
2017-09-21 19:21 ` Mario.Limonciello
2017-09-21 13:57 ` [PATCH 10/12] platform/x86: wmi: destroy on cleanup rather than unregister Mario Limonciello
2017-09-21 13:57 ` [PATCH 11/12] platform/x86: dell-wmi-smbios: introduce character device for userspace Mario Limonciello
2017-09-25 16:31 ` Pali Rohár
2017-09-25 16:58 ` Andy Shevchenko
2017-09-25 17:46 ` Mario.Limonciello
2017-09-25 17:46 ` Mario.Limonciello
2017-09-27 16:59 ` Darren Hart
2017-09-27 18:10 ` Mario.Limonciello
2017-09-27 18:10 ` Mario.Limonciello
2017-09-27 18:50 ` Darren Hart
2017-09-27 21:12 ` Mario.Limonciello
2017-09-27 21:12 ` Mario.Limonciello
2017-09-27 21:59 ` Darren Hart
2017-09-21 13:57 ` [PATCH 12/12] platform/x86: Kconfig: Change the default settings for dell-wmi-smbios Mario Limonciello
2017-09-25 16:13 ` [PATCH 00/12] Introduce support for Dell SMBIOS over WMI Pali Rohár
2017-09-25 16:32 ` Mario.Limonciello
2017-09-25 16:32 ` Mario.Limonciello
2017-09-25 16:49 ` Pali Rohár
2017-09-25 19:27 ` Mario.Limonciello
2017-09-25 19:27 ` Mario.Limonciello
2017-09-27 16:39 ` Darren Hart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170925161851.GK22190@pali \
--to=pali.rohar@gmail.com \
--cc=dvhart@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@dell.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=quasisec@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.