From: Kees Cook <keescook@chromium.org>
To: linux-kernel@vger.kernel.org
Cc: Samuel Chessman <chessman@tux.org>,
netdev@vger.kernel.org, Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH] net/ti/tlan: Convert timers to use timer_setup()
Date: Wed, 4 Oct 2017 17:50:11 -0700 [thread overview]
Message-ID: <20171005005011.GA23191@beast> (raw)
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Samuel Chessman <chessman@tux.org>
Cc: netdev@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
This requires commit 686fef928bba ("timer: Prepare to change timer
callback argument type") in v4.14-rc3, but should be otherwise
stand-alone.
---
drivers/net/ethernet/ti/tlan.c | 32 +++++++++++++-------------------
1 file changed, 13 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/ti/tlan.c b/drivers/net/ethernet/ti/tlan.c
index c8d53d8c83ee..8f53d762fbc4 100644
--- a/drivers/net/ethernet/ti/tlan.c
+++ b/drivers/net/ethernet/ti/tlan.c
@@ -172,7 +172,8 @@ static u32 tlan_handle_tx_eoc(struct net_device *, u16);
static u32 tlan_handle_status_check(struct net_device *, u16);
static u32 tlan_handle_rx_eoc(struct net_device *, u16);
-static void tlan_timer(unsigned long);
+static void tlan_timer(struct timer_list *t);
+static void tlan_phy_monitor(struct timer_list *t);
static void tlan_reset_lists(struct net_device *);
static void tlan_free_lists(struct net_device *);
@@ -190,7 +191,6 @@ static void tlan_phy_power_up(struct net_device *);
static void tlan_phy_reset(struct net_device *);
static void tlan_phy_start_link(struct net_device *);
static void tlan_phy_finish_auto_neg(struct net_device *);
-static void tlan_phy_monitor(unsigned long);
/*
static int tlan_phy_nop(struct net_device *);
@@ -254,11 +254,10 @@ tlan_set_timer(struct net_device *dev, u32 ticks, u32 type)
spin_unlock_irqrestore(&priv->lock, flags);
return;
}
- priv->timer.function = tlan_timer;
+ priv->timer.function = (TIMER_FUNC_TYPE)tlan_timer;
if (!in_irq())
spin_unlock_irqrestore(&priv->lock, flags);
- priv->timer.data = (unsigned long) dev;
priv->timer_set_at = jiffies;
priv->timer_type = type;
mod_timer(&priv->timer, jiffies + ticks);
@@ -926,8 +925,8 @@ static int tlan_open(struct net_device *dev)
return err;
}
- init_timer(&priv->timer);
- init_timer(&priv->media_timer);
+ timer_setup(&priv->timer, NULL, 0);
+ timer_setup(&priv->media_timer, tlan_phy_monitor, 0);
tlan_start(dev);
@@ -1426,8 +1425,7 @@ static u32 tlan_handle_tx_eof(struct net_device *dev, u16 host_int)
tlan_dio_write8(dev->base_addr,
TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT);
if (priv->timer.function == NULL) {
- priv->timer.function = tlan_timer;
- priv->timer.data = (unsigned long) dev;
+ priv->timer.function = (TIMER_FUNC_TYPE)tlan_timer;
priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
priv->timer_set_at = jiffies;
priv->timer_type = TLAN_TIMER_ACTIVITY;
@@ -1578,8 +1576,7 @@ static u32 tlan_handle_rx_eof(struct net_device *dev, u16 host_int)
tlan_dio_write8(dev->base_addr,
TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT);
if (priv->timer.function == NULL) {
- priv->timer.function = tlan_timer;
- priv->timer.data = (unsigned long) dev;
+ priv->timer.function = (TIMER_FUNC_TYPE)tlan_timer;
priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
priv->timer_set_at = jiffies;
priv->timer_type = TLAN_TIMER_ACTIVITY;
@@ -1836,10 +1833,10 @@ ThunderLAN driver timer function
*
**************************************************************/
-static void tlan_timer(unsigned long data)
+static void tlan_timer(struct timer_list *t)
{
- struct net_device *dev = (struct net_device *) data;
- struct tlan_priv *priv = netdev_priv(dev);
+ struct tlan_priv *priv = from_timer(priv, t, timer);
+ struct net_device *dev = priv->dev;
u32 elapsed;
unsigned long flags = 0;
@@ -1872,7 +1869,6 @@ static void tlan_timer(unsigned long data)
tlan_dio_write8(dev->base_addr,
TLAN_LED_REG, TLAN_LED_LINK);
} else {
- priv->timer.function = tlan_timer;
priv->timer.expires = priv->timer_set_at
+ TLAN_TIMER_ACT_DELAY;
spin_unlock_irqrestore(&priv->lock, flags);
@@ -2317,8 +2313,6 @@ tlan_finish_reset(struct net_device *dev)
} else
netdev_info(dev, "Link active\n");
/* Enabling link beat monitoring */
- priv->media_timer.function = tlan_phy_monitor;
- priv->media_timer.data = (unsigned long) dev;
priv->media_timer.expires = jiffies + HZ;
add_timer(&priv->media_timer);
}
@@ -2763,10 +2757,10 @@ static void tlan_phy_finish_auto_neg(struct net_device *dev)
*
*******************************************************************/
-static void tlan_phy_monitor(unsigned long data)
+static void tlan_phy_monitor(struct timer_list *t)
{
- struct net_device *dev = (struct net_device *) data;
- struct tlan_priv *priv = netdev_priv(dev);
+ struct tlan_priv *priv = from_timer(priv, t, media_timer);
+ struct net_device *dev = priv->dev;
u16 phy;
u16 phy_status;
--
2.7.4
--
Kees Cook
Pixel Security
reply other threads:[~2017-10-05 0:50 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171005005011.GA23191@beast \
--to=keescook@chromium.org \
--cc=chessman@tux.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.