From: Kees Cook <keescook@chromium.org>
To: linux-kernel@vger.kernel.org
Cc: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>,
"David S. Miller" <davem@davemloft.net>,
Jarod Wilson <jarod@redhat.com>,
netdev@vger.kernel.org, Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH] drivers/net/3com: Convert timers to use timer_setup()
Date: Wed, 4 Oct 2017 17:51:30 -0700 [thread overview]
Message-ID: <20171005005130.GA23430@beast> (raw)
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: netdev@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
This requires commit 686fef928bba ("timer: Prepare to change timer
callback argument type") in v4.14-rc3, but should be otherwise
stand-alone.
---
drivers/net/ethernet/3com/3c574_cs.c | 12 +++++-------
drivers/net/ethernet/3com/3c589_cs.c | 10 +++++-----
drivers/net/ethernet/3com/3c59x.c | 20 ++++++++++----------
3 files changed, 20 insertions(+), 22 deletions(-)
diff --git a/drivers/net/ethernet/3com/3c574_cs.c b/drivers/net/ethernet/3com/3c574_cs.c
index 47c844cc9d27..48bc7fa0258c 100644
--- a/drivers/net/ethernet/3com/3c574_cs.c
+++ b/drivers/net/ethernet/3com/3c574_cs.c
@@ -225,7 +225,7 @@ static unsigned short read_eeprom(unsigned int ioaddr, int index);
static void tc574_wait_for_completion(struct net_device *dev, int cmd);
static void tc574_reset(struct net_device *dev);
-static void media_check(unsigned long arg);
+static void media_check(struct timer_list *t);
static int el3_open(struct net_device *dev);
static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
struct net_device *dev);
@@ -377,7 +377,7 @@ static int tc574_config(struct pcmcia_device *link)
lp->autoselect = config & Autoselect ? 1 : 0;
}
- init_timer(&lp->media);
+ timer_setup(&lp->media, media_check, 0);
{
int phy;
@@ -681,8 +681,6 @@ static int el3_open(struct net_device *dev)
netif_start_queue(dev);
tc574_reset(dev);
- lp->media.function = media_check;
- lp->media.data = (unsigned long) dev;
lp->media.expires = jiffies + HZ;
add_timer(&lp->media);
@@ -859,10 +857,10 @@ static irqreturn_t el3_interrupt(int irq, void *dev_id)
(and as a last resort, poll the NIC for events), and to monitor
the MII, reporting changes in cable status.
*/
-static void media_check(unsigned long arg)
+static void media_check(struct timer_list *t)
{
- struct net_device *dev = (struct net_device *) arg;
- struct el3_private *lp = netdev_priv(dev);
+ struct el3_private *lp = from_timer(lp, t, media);
+ struct net_device *dev = lp->p_dev->priv;
unsigned int ioaddr = dev->base_addr;
unsigned long flags;
unsigned short /* cable, */ media, partner;
diff --git a/drivers/net/ethernet/3com/3c589_cs.c b/drivers/net/ethernet/3com/3c589_cs.c
index e28254a00599..2b2695311bda 100644
--- a/drivers/net/ethernet/3com/3c589_cs.c
+++ b/drivers/net/ethernet/3com/3c589_cs.c
@@ -163,7 +163,7 @@ static void tc589_release(struct pcmcia_device *link);
static u16 read_eeprom(unsigned int ioaddr, int index);
static void tc589_reset(struct net_device *dev);
-static void media_check(unsigned long arg);
+static void media_check(struct timer_list *t);
static int el3_config(struct net_device *dev, struct ifmap *map);
static int el3_open(struct net_device *dev);
static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
@@ -517,7 +517,7 @@ static int el3_open(struct net_device *dev)
netif_start_queue(dev);
tc589_reset(dev);
- setup_timer(&lp->media, media_check, (unsigned long)dev);
+ timer_setup(&lp->media, media_check, 0);
mod_timer(&lp->media, jiffies + HZ);
dev_dbg(&link->dev, "%s: opened, status %4.4x.\n",
@@ -676,10 +676,10 @@ static irqreturn_t el3_interrupt(int irq, void *dev_id)
return IRQ_RETVAL(handled);
}
-static void media_check(unsigned long arg)
+static void media_check(struct timer_list *t)
{
- struct net_device *dev = (struct net_device *)(arg);
- struct el3_private *lp = netdev_priv(dev);
+ struct el3_private *lp = from_timer(lp, t, media);
+ struct net_device *dev = lp->p_dev->priv;
unsigned int ioaddr = dev->base_addr;
u16 media, errs;
unsigned long flags;
diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
index 402d9090ad29..f4e13a7014bd 100644
--- a/drivers/net/ethernet/3com/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -759,8 +759,8 @@ static int vortex_open(struct net_device *dev);
static void mdio_sync(struct vortex_private *vp, int bits);
static int mdio_read(struct net_device *dev, int phy_id, int location);
static void mdio_write(struct net_device *vp, int phy_id, int location, int value);
-static void vortex_timer(unsigned long arg);
-static void rx_oom_timer(unsigned long arg);
+static void vortex_timer(struct timer_list *t);
+static void rx_oom_timer(struct timer_list *t);
static netdev_tx_t vortex_start_xmit(struct sk_buff *skb,
struct net_device *dev);
static netdev_tx_t boomerang_start_xmit(struct sk_buff *skb,
@@ -1599,9 +1599,9 @@ vortex_up(struct net_device *dev)
dev->name, media_tbl[dev->if_port].name);
}
- setup_timer(&vp->timer, vortex_timer, (unsigned long)dev);
+ timer_setup(&vp->timer, vortex_timer, 0);
mod_timer(&vp->timer, RUN_AT(media_tbl[dev->if_port].wait));
- setup_timer(&vp->rx_oom_timer, rx_oom_timer, (unsigned long)dev);
+ timer_setup(&vp->rx_oom_timer, rx_oom_timer, 0);
if (vortex_debug > 1)
pr_debug("%s: Initial media type %s.\n",
@@ -1784,10 +1784,10 @@ vortex_open(struct net_device *dev)
}
static void
-vortex_timer(unsigned long data)
+vortex_timer(struct timer_list *t)
{
- struct net_device *dev = (struct net_device *)data;
- struct vortex_private *vp = netdev_priv(dev);
+ struct vortex_private *vp = from_timer(vp, t, timer);
+ struct net_device *dev = vp->mii.dev;
void __iomem *ioaddr = vp->ioaddr;
int next_tick = 60*HZ;
int ok = 0;
@@ -2687,10 +2687,10 @@ boomerang_rx(struct net_device *dev)
* for some memory. Otherwise there is no way to restart the rx process.
*/
static void
-rx_oom_timer(unsigned long arg)
+rx_oom_timer(struct timer_list *t)
{
- struct net_device *dev = (struct net_device *)arg;
- struct vortex_private *vp = netdev_priv(dev);
+ struct vortex_private *vp = from_timer(vp, t, rx_oom_timer);
+ struct net_device *dev = vp->mii.dev;
spin_lock_irq(&vp->lock);
if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE) /* This test is redundant, but makes me feel good */
--
2.7.4
--
Kees Cook
Pixel Security
reply other threads:[~2017-10-05 0:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171005005130.GA23430@beast \
--to=keescook@chromium.org \
--cc=davem@davemloft.net \
--cc=jarod@redhat.com \
--cc=klassert@mathematik.tu-chemnitz.de \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.