From: Borislav Petkov <bp@suse.de>
To: Brijesh Singh <brijesh.singh@amd.com>
Cc: x86@kernel.org, kvm@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Radim Krčmář" <rkrcmar@redhat.com>,
"Herbert Xu" <herbert@gondor.apana.org.au>,
"Gary Hook" <gary.hook@amd.com>,
"Tom Lendacky" <thomas.lendacky@amd.com>,
linux-crypto@vger.kernel.org
Subject: Re: [Part2 PATCH v5 11/31] crypto: ccp: Define SEV key management command id
Date: Thu, 5 Oct 2017 22:56:58 +0200 [thread overview]
Message-ID: <20171005205658.77onrn2mr2mrxafs@pd.tnic> (raw)
In-Reply-To: <20171004131412.13038-12-brijesh.singh@amd.com>
On Wed, Oct 04, 2017 at 08:13:52AM -0500, Brijesh Singh wrote:
> Define Secure Encrypted Virtualization (SEV) key management command id
> and structure. The command definition is available in SEV KM [1] spec
> 0.14.
>
> [1] http://support.amd.com/TechDocs/55766_SEV-KM API_Specification.pdf
>
> Cc: Paolo Bonzini <pbonzini@redhat.com>
> Cc: "Radim Krčmář" <rkrcmar@redhat.com>
> Cc: Borislav Petkov <bp@suse.de>
> Cc: Herbert Xu <herbert@gondor.apana.org.au>
> Cc: Gary Hook <gary.hook@amd.com>
> Cc: Tom Lendacky <thomas.lendacky@amd.com>
> Cc: linux-crypto@vger.kernel.org
> Cc: kvm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
> ---
> include/linux/psp-sev.h | 515 ++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 515 insertions(+)
> create mode 100644 include/linux/psp-sev.h
Some fixes ontop below.
With that:
Reviewed-by: Borislav Petkov <bp@suse.de>
---
diff --git a/include/linux/psp-sev.h b/include/linux/psp-sev.h
index f01d0e3b09b8..496375d7f6a9 100644
--- a/include/linux/psp-sev.h
+++ b/include/linux/psp-sev.h
@@ -122,12 +122,12 @@ enum psp_ret_code {
* @tmr_address: system physical address used for SEV-ES
* @tmr_len: len of tmr_address
*/
-struct __attribute__((__packed__)) sev_data_init {
+struct sev_data_init {
u32 flags; /* In */
u32 reserved; /* In */
u64 tmr_address; /* In */
u32 tmr_len; /* In */
-};
+} __packed;
/**
* struct sev_data_status - PLATFORM_STATUS command parameters
@@ -140,7 +140,7 @@ struct __attribute__((__packed__)) sev_data_init {
* @build: firmware build id for API version
* @guest_count: number of active guests
*/
-struct __attribute__((__packed__)) sev_data_status {
+struct sev_data_status {
u8 api_major; /* Out */
u8 api_minor; /* Out */
u8 state; /* Out */
@@ -150,7 +150,7 @@ struct __attribute__((__packed__)) sev_data_status {
u32 reserved2 : 23;
u32 build : 8; /* Out */
u32 guest_count; /* Out */
-};
+} __packed;
/**
* struct sev_data_pek_csr - PEK_CSR command parameters
@@ -158,10 +158,10 @@ struct __attribute__((__packed__)) sev_data_status {
* @address: PEK certificate chain
* @len: len of certificate
*/
-struct __attribute__((__packed__)) sev_data_pek_csr {
+struct sev_data_pek_csr {
u64 address; /* In */
u32 len; /* In/Out */
-};
+} __packed;
/**
* struct sev_data_cert_import - PEK_CERT_IMPORT command parameters
@@ -171,13 +171,13 @@ struct __attribute__((__packed__)) sev_data_pek_csr {
* @oca_address: OCA certificate chain
* @oca_len: len of OCA certificate
*/
-struct __attribute__((__packed__)) sev_data_pek_cert_import {
+struct sev_data_pek_cert_import {
u64 pek_cert_address; /* In */
u32 pek_cert_len; /* In */
u32 reserved; /* In */
u64 oca_cert_address; /* In */
u32 oca_cert_len; /* In */
-};
+} __packed;
/**
* struct sev_data_pdh_cert_export - PDH_CERT_EXPORT command parameters
@@ -187,22 +187,22 @@ struct __attribute__((__packed__)) sev_data_pek_cert_import {
* @cert_chain_address: PDH certificate chain
* @cert_chain_len: len of PDH certificate chain
*/
-struct __attribute__((__packed__)) sev_data_pdh_cert_export {
+struct sev_data_pdh_cert_export {
u64 pdh_cert_address; /* In */
u32 pdh_cert_len; /* In/Out */
u32 reserved; /* In */
u64 cert_chain_address; /* In */
u32 cert_chain_len; /* In/Out */
-};
+} __packed;
/**
* struct sev_data_decommission - DECOMMISSION command parameters
*
* @handle: handle of the VM to decommission
*/
-struct __attribute__((__packed__)) sev_data_decommission {
+struct sev_data_decommission {
u32 handle; /* In */
-};
+} __packed;
/**
* struct sev_data_activate - ACTIVATE command parameters
@@ -210,19 +210,19 @@ struct __attribute__((__packed__)) sev_data_decommission {
* @handle: handle of the VM to activate
* @asid: asid assigned to the VM
*/
-struct __attribute__((__packed__)) sev_data_activate {
+struct sev_data_activate {
u32 handle; /* In */
u32 asid; /* In */
-};
+} __packed;
/**
* struct sev_data_deactivate - DEACTIVATE command parameters
*
* @handle: handle of the VM to deactivate
*/
-struct __attribute__((__packed__)) sev_data_deactivate {
+struct sev_data_deactivate {
u32 handle; /* In */
-};
+} __packed;
/**
* struct sev_data_guest_status - SEV GUEST_STATUS command parameters
@@ -232,12 +232,12 @@ struct __attribute__((__packed__)) sev_data_deactivate {
* @asid: current ASID of the VM
* @state: current state of the VM
*/
-struct __attribute__((__packed__)) sev_data_guest_status {
+struct sev_data_guest_status {
u32 handle; /* In */
u32 policy; /* Out */
u32 asid; /* Out */
u8 state; /* Out */
-};
+} __packed;
/**
* struct sev_data_launch_start - LAUNCH_START command parameters
@@ -249,7 +249,7 @@ struct __attribute__((__packed__)) sev_data_guest_status {
* @session_address: physical address of session parameters
* @session_len: len of session parameters
*/
-struct __attribute__((__packed__)) sev_data_launch_start {
+struct sev_data_launch_start {
u32 handle; /* In/Out */
u32 policy; /* In */
u64 dh_cert_address; /* In */
@@ -257,7 +257,7 @@ struct __attribute__((__packed__)) sev_data_launch_start {
u32 reserved; /* In */
u64 session_address; /* In */
u32 session_len; /* In */
-};
+} __packed;
/**
* struct sev_data_launch_update_data - LAUNCH_UPDATE_DATA command parameter
@@ -266,12 +266,12 @@ struct __attribute__((__packed__)) sev_data_launch_start {
* @len: len of memory to be encrypted
* @address: physical address of memory region to encrypt
*/
-struct __attribute__((__packed__)) sev_data_launch_update_data {
+struct sev_data_launch_update_data {
u32 handle; /* In */
u32 reserved;
u64 address; /* In */
u32 len; /* In */
-};
+} __packed;
/**
* struct sev_data_launch_update_vmsa - LAUNCH_UPDATE_VMSA command
@@ -280,12 +280,12 @@ struct __attribute__((__packed__)) sev_data_launch_update_data {
* @address: physical address of memory region to encrypt
* @len: len of memory region to encrypt
*/
-struct __attribute__((__packed__)) sev_data_launch_update_vmsa {
+struct sev_data_launch_update_vmsa {
u32 handle; /* In */
u32 reserved;
u64 address; /* In */
u32 len; /* In */
-};
+} __packed;
/**
* struct sev_data_launch_measure - LAUNCH_MEASURE command parameters
@@ -294,12 +294,12 @@ struct __attribute__((__packed__)) sev_data_launch_update_vmsa {
* @address: physical address containing the measurement blob
* @len: len of measurement blob
*/
-struct __attribute__((__packed__)) sev_data_launch_measure {
+struct sev_data_launch_measure {
u32 handle; /* In */
u32 reserved;
u64 address; /* In */
u32 len; /* In/Out */
-};
+} __packed;
/**
* struct sev_data_launch_secret - LAUNCH_SECRET command parameters
@@ -312,7 +312,7 @@ struct __attribute__((__packed__)) sev_data_launch_measure {
* @trans_address: physical address of transport memory buffer
* @trans_len: len of transport memory buffer
*/
-struct __attribute__((__packed__)) sev_data_launch_secret {
+struct sev_data_launch_secret {
u32 handle; /* In */
u32 reserved1;
u64 hdr_address; /* In */
@@ -323,16 +323,16 @@ struct __attribute__((__packed__)) sev_data_launch_secret {
u32 reserved3;
u64 trans_address; /* In */
u32 trans_len; /* In */
-};
+} __packed;
/**
* struct sev_data_launch_finish - LAUNCH_FINISH command parameters
*
* @handle: handle of the VM to process
*/
-struct __attribute__((__packed__)) sev_data_launch_finish {
+struct sev_data_launch_finish {
u32 handle; /* In */
-};
+} __packed;
/**
* struct sev_data_send_start - SEND_START command parameters
@@ -348,7 +348,7 @@ struct __attribute__((__packed__)) sev_data_launch_finish {
* @session_address: physical address containing Session data
* @session_len: len of session data
*/
-struct __attribute__((__packed__)) sev_data_send_start {
+struct sev_data_send_start {
u32 handle; /* In */
u32 policy; /* Out */
u64 pdh_cert_address; /* In */
@@ -362,7 +362,7 @@ struct __attribute__((__packed__)) sev_data_send_start {
u32 reserved3;
u64 session_address; /* In */
u32 session_len; /* In/Out */
-};
+} __packed;
/**
* struct sev_data_send_update - SEND_UPDATE_DATA command
@@ -375,7 +375,7 @@ struct __attribute__((__packed__)) sev_data_send_start {
* @trans_address: physical address of host memory region
* @trans_len: len of host memory region
*/
-struct __attribute__((__packed__)) sev_data_send_update_data {
+struct sev_data_send_update_data {
u32 handle; /* In */
u32 reserved1;
u64 hdr_address; /* In */
@@ -386,7 +386,7 @@ struct __attribute__((__packed__)) sev_data_send_update_data {
u32 reserved3;
u64 trans_address; /* In */
u32 trans_len; /* In */
-};
+} __packed;
/**
* struct sev_data_send_update - SEND_UPDATE_VMSA command
@@ -399,7 +399,7 @@ struct __attribute__((__packed__)) sev_data_send_update_data {
* @trans_address: physical address of host memory region
* @trans_len: len of host memory region
*/
-struct __attribute__((__packed__)) sev_data_send_update_vmsa {
+struct sev_data_send_update_vmsa {
u32 handle; /* In */
u64 hdr_address; /* In */
u32 hdr_len; /* In/Out */
@@ -409,16 +409,16 @@ struct __attribute__((__packed__)) sev_data_send_update_vmsa {
u32 reserved3;
u64 trans_address; /* In */
u32 trans_len; /* In */
-};
+} __packed;
/**
* struct sev_data_send_finish - SEND_FINISH command parameters
*
* @handle: handle of the VM to process
*/
-struct __attribute__((__packed__)) sev_data_send_finish {
+struct sev_data_send_finish {
u32 handle; /* In */
-};
+} __packed;
/**
* struct sev_data_receive_start - RECEIVE_START command parameters
@@ -429,7 +429,7 @@ struct __attribute__((__packed__)) sev_data_send_finish {
* @session_address: system physical address containing session blob
* @session_len: len of session blob
*/
-struct __attribute__((__packed__)) sev_data_receive_start {
+struct sev_data_receive_start {
u32 handle; /* In/Out */
u32 policy; /* In */
u64 pdh_cert_address; /* In */
@@ -437,7 +437,7 @@ struct __attribute__((__packed__)) sev_data_receive_start {
u32 reserved1;
u64 session_address; /* In */
u32 session_len; /* In */
-};
+} __packed;
/**
* struct sev_data_receive_update_data - RECEIVE_UPDATE_DATA command parameters
@@ -450,7 +450,7 @@ struct __attribute__((__packed__)) sev_data_receive_start {
* @trans_address: system physical address of transport buffer
* @trans_len: len of transport buffer
*/
-struct __attribute__((__packed__)) sev_data_receive_update_data {
+struct sev_data_receive_update_data {
u32 handle; /* In */
u32 reserved1;
u64 hdr_address; /* In */
@@ -461,7 +461,7 @@ struct __attribute__((__packed__)) sev_data_receive_update_data {
u32 reserved3;
u64 trans_address; /* In */
u32 trans_len; /* In */
-};
+} __packed;
/**
* struct sev_data_receive_update_vmsa - RECEIVE_UPDATE_VMSA command parameters
@@ -474,7 +474,7 @@ struct __attribute__((__packed__)) sev_data_receive_update_data {
* @trans_address: system physical address of transport buffer
* @trans_len: len of transport buffer
*/
-struct __attribute__((__packed__)) sev_data_receive_update_vmsa {
+struct sev_data_receive_update_vmsa {
u32 handle; /* In */
u32 reserved1;
u64 hdr_address; /* In */
@@ -485,16 +485,16 @@ struct __attribute__((__packed__)) sev_data_receive_update_vmsa {
u32 reserved3;
u64 trans_address; /* In */
u32 trans_len; /* In */
-};
+} __packed;
/**
* struct sev_data_receive_finish - RECEIVE_FINISH command parameters
*
* @handle: handle of the VM to finish
*/
-struct __attribute__((__packed__)) sev_data_receive_finish {
+struct sev_data_receive_finish {
u32 handle; /* In */
-};
+} __packed;
/**
* struct sev_data_dbg - DBG_ENCRYPT/DBG_DECRYPT command parameters
@@ -504,12 +504,12 @@ struct __attribute__((__packed__)) sev_data_receive_finish {
* @dst_addr: destination address of data to operate on
* @len: len of data to operate on
*/
-struct __attribute__((__packed__)) sev_data_dbg {
+struct sev_data_dbg {
u32 handle; /* In */
u32 reserved;
u64 src_addr; /* In */
u64 dst_addr; /* In */
u32 len; /* In */
-};
+} __packed;
#endif /* __PSP_SEV_H__ */
--
Regards/Gruss,
Boris.
SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
--
next prev parent reply other threads:[~2017-10-05 20:56 UTC|newest]
Thread overview: 112+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-04 13:13 [Part2 PATCH v5 00/31] x86: Secure Encrypted Virtualization (AMD) Brijesh Singh
2017-10-04 13:13 ` [Part2 PATCH v5 01/31] Documentation/virtual/kvm: Add AMD Secure Encrypted Virtualization (SEV) Brijesh Singh
2017-10-04 13:13 ` [Part2 PATCH v5 02/31] x86/CPU/AMD: Add the Secure Encrypted Virtualization CPU feature Brijesh Singh
2017-10-04 13:13 ` [Part2 PATCH v5 03/31] kvm: svm: prepare for new bit definition in nested_ctl Brijesh Singh
2017-10-04 13:13 ` [Part2 PATCH v5 04/31] kvm: svm: Add SEV feature definitions to KVM Brijesh Singh
2017-10-04 13:13 ` [Part2 PATCH v5 05/31] KVM: SVM: Prepare to reserve asid for SEV guest Brijesh Singh
2017-10-04 14:33 ` Borislav Petkov
2017-10-04 13:13 ` [Part2 PATCH v5 06/31] KVM: X86: Extend CPUID range to include new leaf Brijesh Singh
2017-10-04 13:13 ` [Part2 PATCH v5 07/31] KVM: Introduce KVM_MEMORY_ENCRYPT_OP ioctl Brijesh Singh
2017-10-04 14:50 ` Borislav Petkov
2017-10-04 13:13 ` [Part2 PATCH v5 08/31] KVM: Introduce KVM_MEMORY_ENCRYPT_REGISTER_REGION ioctl Brijesh Singh
2017-10-04 15:19 ` Borislav Petkov
2017-10-04 17:18 ` Brijesh Singh
2017-10-04 13:13 ` [Part2 PATCH v5 09/31] crypto: ccp: Build the AMD secure processor driver only with AMD CPU support Brijesh Singh
2017-10-04 21:47 ` Borislav Petkov
2017-10-04 23:06 ` Brijesh Singh
2017-10-04 13:13 ` [Part2 PATCH v5 10/31] crypto: ccp: Add Platform Security Processor (PSP) device support Brijesh Singh
2017-10-05 9:56 ` Borislav Petkov
2017-10-06 23:09 ` [Part2 PATCH v5.1 " Brijesh Singh
2017-10-04 13:13 ` [Part2 PATCH v5 11/31] crypto: ccp: Define SEV key management command id Brijesh Singh
2017-10-05 20:56 ` Borislav Petkov [this message]
2017-10-08 21:14 ` Brijesh Singh
2017-10-04 13:13 ` [Part2 PATCH v5 12/31] crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support Brijesh Singh
2017-10-06 18:49 ` Borislav Petkov
2017-10-06 19:48 ` Brijesh Singh
2017-10-07 18:13 ` Brijesh Singh
2017-10-07 1:05 ` [Part2 PATCH v5.1 12.1/31] " Brijesh Singh
2017-10-07 1:06 ` [Part2 PATCH v5.1 12.2/31] crypto: ccp: Define SEV userspace ioctl and command id Brijesh Singh
2017-10-07 14:20 ` Borislav Petkov
2017-10-08 21:18 ` Brijesh Singh
2017-10-11 16:46 ` [Part2 PATCH v5.2 12.1/31] " Brijesh Singh
2017-10-12 13:27 ` Borislav Petkov
2017-10-12 14:18 ` Brijesh Singh
2017-10-07 1:06 ` [Part2 PATCH v5.1 12.3/31] crypto: ccp: Implement SEV_FACTORY_RESET ioctl command Brijesh Singh
2017-10-11 14:32 ` Borislav Petkov
2017-10-11 16:55 ` [Part2 PATCH v5.2 " Brijesh Singh
2017-10-12 14:13 ` Borislav Petkov
2017-10-07 1:06 ` [Part2 PATCH v5.1 12.4/31] crypto: ccp: Implement SEV_PLATFORM_STATUS " Brijesh Singh
2017-10-11 17:01 ` [Part2 PATCH v5.2 " Brijesh Singh
2017-10-11 17:02 ` [Part2 PATCH v5.1 " Borislav Petkov
2017-10-11 19:49 ` Brijesh Singh
2017-10-11 20:04 ` Borislav Petkov
2017-10-11 20:10 ` Borislav Petkov
2017-10-11 20:10 ` Brijesh Singh
2017-10-11 20:28 ` Borislav Petkov
2017-10-11 20:45 ` Brijesh Singh
2017-10-11 20:53 ` Brijesh Singh
2017-10-11 20:54 ` Borislav Petkov
2017-10-07 1:06 ` [Part2 PATCH v5.1 12.5/31] crypto: ccp: Implement SEV_PEK_GEN " Brijesh Singh
2017-10-12 18:28 ` Borislav Petkov
2017-10-12 20:11 ` Brijesh Singh
2017-10-12 20:21 ` Borislav Petkov
2017-10-12 20:34 ` Brijesh Singh
2017-10-07 1:06 ` [Part2 PATCH v5.1 12.6/31] crypto: ccp: Implement SEV_PDH_GEN " Brijesh Singh
2017-10-12 18:48 ` Borislav Petkov
2017-10-12 20:21 ` Brijesh Singh
2017-10-12 20:23 ` Borislav Petkov
2017-10-07 1:06 ` [Part2 PATCH v5.1 12.7/31] crypto: ccp: Implement SEV_PEK_CSR " Brijesh Singh
2017-10-12 19:53 ` Borislav Petkov
2017-10-13 2:24 ` Brijesh Singh
2017-10-13 4:13 ` Brijesh Singh
2017-10-13 10:20 ` Borislav Petkov
2017-10-13 9:14 ` Borislav Petkov
2017-10-07 1:06 ` [Part2 PATCH v5.1 12.8/31] crypto: ccp: Implement SEV_PEK_CERT_IMPORT " Brijesh Singh
2017-10-13 14:53 ` Borislav Petkov
2017-10-13 16:09 ` Brijesh Singh
2017-10-07 1:06 ` [Part2 PATCH v5.1 12.9/31] crypto: ccp: Implement SEV_PDH_CERT_EXPORT " Brijesh Singh
2017-10-13 15:01 ` Borislav Petkov
2017-10-07 18:40 ` [Part2 PATCH v5.1 12.1/31] crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support Borislav Petkov
2017-10-08 13:30 ` Brijesh Singh
2017-10-08 14:00 ` Borislav Petkov
2017-10-09 0:11 ` Brijesh Singh
2017-10-09 15:21 ` Borislav Petkov
2017-10-10 15:00 ` Brijesh Singh
2017-10-10 18:43 ` Tom Lendacky
2017-10-10 20:04 ` Borislav Petkov
2017-10-11 14:19 ` Borislav Petkov
2017-10-11 14:23 ` Brijesh Singh
2017-10-11 16:50 ` [Part2 PATCH v5.2 12.2/31] " Brijesh Singh
2017-10-12 14:08 ` Borislav Petkov
2017-10-12 21:11 ` Brijesh Singh
2017-10-12 21:41 ` Borislav Petkov
2017-10-12 21:52 ` Brijesh Singh
2017-10-12 22:22 ` Borislav Petkov
2017-10-12 18:21 ` Borislav Petkov
2017-10-12 20:05 ` Brijesh Singh
2017-10-04 13:13 ` [Part2 PATCH v5 13/31] KVM: X86: Add CONFIG_KVM_AMD_SEV Brijesh Singh
2017-10-13 16:44 ` Borislav Petkov
2017-10-04 13:13 ` [Part2 PATCH v5 14/31] KVM: SVM: Add sev module_param Brijesh Singh
2017-10-13 16:46 ` Borislav Petkov
2017-10-04 13:13 ` [Part2 PATCH v5 15/31] KVM: SVM: Reserve ASID range for SEV guest Brijesh Singh
2017-10-13 16:58 ` Borislav Petkov
2017-10-04 13:13 ` [Part2 PATCH v5 16/31] KVM: Define SEV key management command id Brijesh Singh
2017-10-13 18:54 ` Borislav Petkov
2017-10-14 10:06 ` Borislav Petkov
2017-10-04 13:13 ` [Part2 PATCH v5 17/31] KVM: SVM: Add KVM_SEV_INIT command Brijesh Singh
2017-10-14 9:21 ` Borislav Petkov
2017-10-04 13:13 ` [Part2 PATCH v5 18/31] KVM: SVM: VMRUN should use assosiated ASID when SEV is enabled Brijesh Singh
2017-10-14 9:27 ` Borislav Petkov
2017-10-04 13:14 ` [Part2 PATCH v5 19/31] KVM: SVM: Add support for KVM_SEV_LAUNCH_START command Brijesh Singh
2017-10-14 10:08 ` Borislav Petkov
2017-10-04 13:14 ` [Part2 PATCH v5 20/31] KVM: SVM: Add support for KVM_SEV_LAUNCH_UPDATE_DATA command Brijesh Singh
2017-10-14 14:59 ` Borislav Petkov
2017-10-04 13:14 ` [Part2 PATCH v5 21/31] KVM: SVM: Add support for KVM_SEV_LAUNCH_MEASURE command Brijesh Singh
2017-10-04 13:14 ` [Part2 PATCH v5 22/31] KVM: SVM: Add support for SEV LAUNCH_FINISH command Brijesh Singh
2017-10-04 13:14 ` [Part2 PATCH v5 23/31] KVM: SVM: Add support for SEV GUEST_STATUS command Brijesh Singh
2017-10-04 13:14 ` [Part2 PATCH v5 24/31] KVM: SVM: Add support for SEV DEBUG_DECRYPT command Brijesh Singh
2017-10-04 13:14 ` [Part2 PATCH v5 25/31] KVM: SVM: Add support for SEV DEBUG_ENCRYPT command Brijesh Singh
2017-10-04 13:14 ` [Part2 PATCH v5 26/31] KVM: SVM: Add support for SEV LAUNCH_SECRET command Brijesh Singh
2017-10-04 13:14 ` [Part2 PATCH v5 27/31] KVM: SVM: Pin guest memory when SEV is active Brijesh Singh
2017-10-04 13:14 ` [Part2 PATCH v5 28/31] KVM: X86: Add memory encryption enabled ops Brijesh Singh
2017-10-04 13:14 ` [Part2 PATCH v5 29/31] KVM: SVM: Clear C-bit from the page fault address Brijesh Singh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171005205658.77onrn2mr2mrxafs@pd.tnic \
--to=bp@suse.de \
--cc=brijesh.singh@amd.com \
--cc=gary.hook@amd.com \
--cc=herbert@gondor.apana.org.au \
--cc=kvm@vger.kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=rkrcmar@redhat.com \
--cc=thomas.lendacky@amd.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.